This paper studies the simulation method of tie line power flow control among areas of an interconnected network in load flow calculation.
本文对潮流计算中互联电网各区域间的联络线功率控制的模拟计算方法进行了研究。
The simulation results show that this method can raise the call processing capability in real time and raise the utilization of the network resources in the meanwhile.
仿真结果表明，该方法提高了网络对呼叫的实时处理能力，又增加了网络资源的利用率。
To improve the usability and running efficiency of the parallel network simulation, effective topology partitioning method is required.
为提高并行网络模拟的可用性与运行效率，需要研究有效的拓扑划分方法。
Based on the comprehensive load model considering the distribution network as the research object, by digital simulation method, and the load model for an in-depth study of the simulation.
本文以考虑配电网络综合负荷模型作为研究对象，采用数字仿真方法，对该负荷模型进行了较为深入的仿真研究。
We have investigated artificial neural network models based on an augmented Lagrange method, and accomplished the circuit structure and the simulation experiments.
研究了扩展拉格朗日方法的人工神经网络模型，实现了其电路结构，并进行了仿真实验。
The method uses neuro network expert system and trains with the practical data from the plant and gets better simulation result. It can be used in practical production.
该方法采用神经网络专家系统，并经过工厂提供的实测数据进行训练，仿真结果较好，可以用于生产实际。
This method can detect intrusion action on system level, network level and user level, simulation experiment indicates the method has very highly detection ability and robust ability.
该方法能够检测系统级、网络级和用户级的入侵行为，模拟实验表明该方法有很强的检测能力和较好的鲁棒性。
Compared with other simulation technique, neural network response surface method can greatly reduce the simulation time at the same precision level.
同其他模拟技术相比，在精度相同的情况下，神经网络响应面法可以大大减少模拟时间。
Information network Design and network Performance Evaluation are critical network research areas, while network simulation is an important method to carry out these research activities.
信息网络设计和信息网络性能评价是网络研究的重要领域，而网络仿真技术是开展网络研究的重要方法。
Authors use the mainstream network simulation tool NS2 in teaching network, set up a simulation model to discuss the network topology and the method of simulation parameters selection.
该文使用主流网络仿真工具NS 2对教学实验网络建立了仿真模型，讨论了网络拓扑结构和仿真参数的选取方法。
Traditional loop gain simulation method is based on two-port network models, which is complex to analysis and it is not suitable to get quantitative analysis of the loop gain fast.
传统的反馈环路增益仿真方法基于有源双端口网络，分析复杂，不利于快速得到环路的定量分析。
Principles of fuzzy neural network and FNN method are adopted for the numerical simulation of network modeling and forecasting of beams with finite deformation of two different materials.
本文运用模糊神经网络原理，采用学习结合型FNN方法，针对两种不同材料梁的大变形进行了网络建模和预测的数值仿真。
Heat evolution correction method for node of the saturated steam network was put forward, which can be used for simulation for large-scale steam network of nuclear power plant.
针对单相可压缩流体网络模型提出了饱和蒸汽网络节点散热修正方法，可以用于核电站等大型蒸汽管网的仿真计算。
To reduce the computation time of network simulation, a dynamic continuous computing method for the simulation of packet transmission was proposed.
为降低网络模拟的计算开销，提出了数据包转发模拟的动态连续计算方法。
A stochastic network model is built by use of the theory and method of Monte Carlo Simulation, with a view to analyzing the risk of the time limit for project and its cost.
建立一个工期和费用估计的随机网络模型，说明应用蒙特卡洛模拟进行工期和费用风险分析的原理及方法。
Simulation results indicate that the modeling method by using the RBF neural network identification technique is effective with the established model featuring a relative high precision.
仿真结果表明采用RBF神经网络辨识建模的方法是有效的，建立的模型精度较高。
At present, there are mainly three kinds of methods to analyze the performance of the network: Analytical method, experimental method, and simulation method.
当前对网络性能分析主要有三种方法：分析方法、实验分法、模拟方法。
A numerical method, namely finite network method, is used to analyze a simulation field of electric network based on experimental method of network simulation field.
根据电网络模拟场的实验方法，本文提出了一种电路网络模拟场的数值分析方法，即有限网络法。
This paper introduces a method of constructing a low-voltage PLC network based on logical topological structure, amd discusses its algorithm and simulation.
文章提出了一种基于“逻辑拓扑结构”组网的低压电力线载波通信组网方法，描述了建立该结构的算法，并进行了实验室仿真。
Generally, this thesis introduces a bridge health detect method based on neural network and applies it to the simulation detection of Ma Sangxi bridge successfully.
概括而言，本文研究和实现了一种基于神经网络的桥梁健康检测方法，并成功运用于马桑溪大桥的模拟检测中。
This paper tries to solve the temperature-field problems of heat-conduction in mechanical machining process for moving heat sources by the simulation method of the R-C network model.
本文试图用网络模拟法解机械制造过程中运动热源的导热温度场问题。
Through the simulation in satellite network , we can conclude that this method has the features of real-time, autonomy and accuracy , perhaps needs a few or doesnt need extra bandwidth.
通过在卫星网络上的仿真表明，具有实时性、自主性、精确性且可能不占用或只占用很少的额外带宽。
In this paper, a new method named "node-splitting algorithm" is presented to deal with the power system electromagnetic transient network partition and parallel simulation.
该文从软件开发的角度出发，提出了一种解决电磁暂态实时仿真问题的分网并行算法。
Thus obtains the use neural network method in the simulation the modeling is one effective method, is specially better regarding the non-linear complex system effect.
从而得出利用神经网络方法在仿真中建模是一种行之有效的方法，特别是对于非线性复杂系统效果更佳。
The simulation results show that, our method makes the network management more efficient by increasing the cluster lifetime and decreasing the number of the disappeared clusters.
仿真研究表明，该方法增大了群的生存时间，减少了群的消失数量，使得自组织网络管理工作更有效、更稳定。
Because the simulation range of river network is wide, the water quality is mostly simulated in numerical method.
由于河网的模拟范围很大，多数情况下只能采用数值方法进行水质模拟。
In the thesis, the research works including physical time simulation algorithm, computer network management flow, and the realization method of node and simulation information management module.
文中给出了物理时间模拟的算法、计算机网络管理的流程、节点信息和仿真信息管理模块的实现方法。
A method for the of transfer probability and transport time tracing the motion of particles in the fracture network was put forward. Furthermore, the corresponding simulation program was developed.
提出了裂隙网络中质点的转移概率和运移时间的计算方法，编制了相应的仿真模拟程序。
For the. 300mw electric generating unit at Daba Power Station the division zone model for the simulation of the radiative heat transfer is set up on the basis of network analytic method.
针对大坝电厂300MW机组，本文在网路分析法的基础上，建立了炉内辐射传热分区仿真模型。
For the. 300mw electric generating unit at Daba Power Station the division zone model for the simulation of the radiative heat transfer is set up on the basis of network analytic method.
针对大坝电厂300MW机组，本文在网路分析法的基础上，建立了炉内辐射传热分区仿真模型。
应用推荐