The GNC algorithms designed are embedded in the trajectory model. The results show that the simulation structure is valid and the GNC schemes are feasible.
将设计好的制导控制算法嵌入六自由度弹道模型中进行验证，仿真结果表明了此快速仿真架构的正确性和制导、控制方案的可行性。
Simulation results quite coincide with test ones, showing that the simulation model well reflects the acoustic characteristics of the real structure of exhaust muffler.
试验结果与仿真结果能较好吻合，表明排气消声器的仿真模型很好地反映了实际结构的声学特性。
Based on the structure characteristics and operation principle of permanent magnet linear synchronous motors (PMLSM) with discontinuous stators, a simulation model was developed.
从不连续定子永磁直线同步电动机的结构特点和工作原理出发，建立起电机的仿真模型。
In view of the fact that this article analyzed the fuel cell interior heat management with emphasis, to union the fuel cell physical structure establishes its simulation model.
鉴于此，本文重点分析了燃料电池内部热管理机理，结合燃料电池的物理结构建立其仿真模型。
The contrastive analysis of modal test and simulation computation show that the finite element model of body-in-white has well represented the vibration characteristics of the original structure.
模态试验和仿真计算的对比分析结果表明，所建立的白车身有限元模型较好地反映了原结构的振动特性。
This paper analyses nonlinear mapping characteristics of cloud model, presents the design method of the intelligent controller based on the structure model, and shows some simulation examples.
文中分析了云模型的非线性映射特性，同时给出了基于此结构模型的智能控制器的设计方法及仿真实例。
The model was established, and a set of simulation has been done, and a series of relationship curves among the parameters of wave guide propagation, structure and technics are obtained.
建立了扩散平板光波导的等效阶跃平板波导模型，进行了一系列的模拟计算，得出了一系列波导传播参量、结构参量与工艺参量之间的关系曲线。
According to the special structure of the differential velocity bed, a simulation calculation of the coal combustion and the physical and chemical process was carried out by the cell model.
针对差速循环流化床的结构及特有形式，采用小室模型的方法，对炉内煤的燃烧及其物理、化学反应过程进行了相应的仿真计算。
This paper introduces the software structure and model libraries design of a distributed comprehensive simulation platform for the mechanical and electrical systems on aircraft.
该文介绍了分布式机载机电设备综合仿真平台的软件结构和模型库设计及仿真实例运行过程。
The content of battle damage simulation is briefly introduced in this paper, while the basic structure and modeling methods of threat model, equipment model and damage model are discussed in detail.
该文简要介绍了装备战斗损伤仿真的内容，详细论述了威胁模型、装备模型及损伤模型的基本结构及建模方法。
The simulation model of air defense fire oppugning effect was based on simulation design theory, simulation control mechanism, model internal structure and model algorithm.
从仿真设计原理、仿真控制机制、模型内部结构和模型算法三方面研究防空火力抗击效果的仿真模型。
In this paper, physical model is designed and thermal simulation experimental system built for new type cooling and lining structure of BF.
针对高炉新型炉体冷却结构，设计了物理模型并建立了热态模拟实验系统。
According to the structure of impulse voltage generator, the EMTP simulation software is used to build a 36-stage charging circuit model of impulse voltage generator.
再根据冲击电压发生器结构，使用EMTP仿真软件搭建36级冲击电压发生器充电回路模型。
Simulation results show that the simplified model provided by this method can satisfactorily imitate rigorous model in addition to its simple structure and feasibility for on line applications.
仿真结果表明，用本文提出的简化模型能较好地逼近基于偏微分方程的严格模型，且结构简单，易于应用。
The training model of test simulation for car of inverted pendulum based on BP algorithm of artificial neural networks (ANN) is a BP network that has 4-input and 3-layer structure.
基于人工神经网络BP算法的倒立摆小车实验仿真训练模型，其倒立摆BP网络为4输入3层结构。
Product definition data, environment definition data and action regulation are building on a unified simulation model structure and can effectively support VPD.
将产品定义数据、环境定义数据及两者之间的作用规律建立在统一的仿真模型结构之上，能够有效地支持虚拟产品开发。
The FE model for the underground LHD machine's bodywork structure was built and the simulation methods for its joint, hydraulic actuator, tyre and boundary conditions were proposed.
建立了地下铲运机整机结构有限元模型，提出铰销、油缸、轮胎及边界条件的模拟方法。
So the whole display system, which built with an ordered data structure model by processing the data from MEMS technical simulation with Object Oriented Programming(OOP), is presented.
最后，以面向对象的思想处理MEMS仿真数据，建立了便于管理和操作的数据结构模型；
C model was applied to build simulation stimulus and expected output responses, and reusable verification structure and verification method of Grey-box were also applied to this design.
通过C仿真模型来创建仿真激励和期望响应，采用了可重用的验证结构和灰盒的验证方法。
The simulation software model is built on the base of object oriented method, and the software is developed, which has the advantages of distinct structure and easily to expanding and maintaining.
将车辆及各部件作为对象，运用面向对象方法建立了车辆动力学仿真软件模型，面向对象方法所特有的封装、继承等特点使系统具有结构清晰、直观、扩展和维护方便等特点。
Through computer simulation, samples, BP algorithms and the influence of network structure neurula on model performance have been discussed as well as the improving measures.
通过计算机实验，讨论样本、学习算法和网络结构等对神经网络预测模型性能的影响及其改进措施。
The primary structure and functions of the Heilongjiang dispatcher training simulation system are described with emphasis on its electric system model including static model and dynamic tide model.
介绍了黑龙江省调度员培训模拟系统的主要组成部分，着重阐述了电力系统模型。包括静态模型及动态潮流模型。
The structure of collaborative simulation model base studied in tsinghua CIMS/ERC is introduced. The composition and system structure of model base supporting collaborative simulation are expatiated.
介绍了参与的清华大学CIMS并行室的协同仿真模型库管理系统的研究，阐述了支持协同仿真的模型库的组成及其体系结构。
In this thesis, the aerodynamic load simulation of one type of helicopter airscrew is studied, and the system's structure and its mathematic model are analyzed.
论文结合实际的工程项目，以某型号直升机旋翼气动载荷模拟为研究内容，对加载系统的组成、系统数学模型进行分析和研究。
The optimal control and simulation method for systems with stochastic perturbation were investigated in the case that control effort is to be considered under internal model control (IMC) structure.
在内模控制（IMC）结构下对控制能量存在约束时一类随机摄动系统的最优控制及其仿真方法作了探讨。
Then, by integrating the Kriging system and fracture simulation system and using structure and imaging logging data, we constructed an multi-field Kriging estimation model.
然后，采用克里金模型和断裂力学模拟系统，综合构造和成像测井裂缝解释资料，构建多场趋势克里金估计模拟模型。
On the basis of flow field simulation, the effect of different types of nozzle structure on the flow patterns are calculated and examined with water model experiments.
在此基础上模拟计算了几种不同形式的水口对流动形态的影响，并用水力模型试验进行了验证。
Combining the dynamics characteristic of crane on lifting and the real structure, the loading model for finite element simulation is presented.
根据转台结构在起吊工况下的动力学特性，结合实际情况建立有限元动力学模拟的载荷模型。
The structure and the operation mechanism for the input-buffered Ethernet switch with input and output virtual queues is analyzed. The model is simulated and evaluated by computer simulation.
分析了采用输入、输出虚队列的输入缓存式以太网交换机的运行机制，并用计算机仿真的方法对其进行模拟、评价。
The paper describes the structure and id ntification of the heat treatment system for lacquered wire. The simulation results of several controllers are compared using the obtained mathematical model.
本文描述了漆包线热处理系统的结构和辨识，利用得到的数学模型，给出了几个不同控制器的仿真比较。
应用推荐