The apparatus consists of a single board microcomputer, propeller type velocity sensor, tail fin type flow direction sensor and corresponding interface circuits and software.
该仪器以单极微机为核心，配置旋浆流速传感器、尾舵式流向传感器、相应的接口电路和软件。
In the paper, an analytic method is described in which a microcomputer is used to analyze dynamic spectrum of display device, and a hardware design of microcomputer interface is discussed specially.
本文提出了一种应用微机对显示器件的动态光谱进行分析的方法，着重于微机接口的硬件设计。
This paper mainly introduces interface circuit design of 8259a and 32 bit single chip microcomputer, provides a method for extension of 80960kb interrupt system.
本文主要介绍8259a与32位单片机80960KB的接口电路设计，为该单片机中断系统的扩展提供一种方法。
Stepping Motor control experiment is a very important experiment in microcomputer principle and interface technology course.
步进电机控制实验是微机原理与接口技术课程中一个非常重要的实验。
Brief introduction: This course shows the introductions to functional structure, principle, instructions, assemble language programming, interface and application of MCS-51single chip microcomputer.
课程简介：本课程介绍MCS -51单片机的功能结构、工作原理、指令系统、编程技术、接口技术和实际应用。
We designed the hardware of test system in the paper, analyzed the principle of each parts of hardware and the design of microcomputer interface circuit.
论文进行了检测系统的实际硬件设计，具体分析了硬件系统中各组成部分的工作原理及实际微机接口电路的设计过程。
This thesis takes Lingyang chip microcomputer and USB chipset PDIUSBD12 as the core of controlling device, and makes a systemic study of USB related techniques and USB interface drive program.
本论文以凌阳单片机和PDIUSBD 12构成USB设备控制端，对usb相关技术和USB设备驱动程序的编写进行研究。
This paper introduces the internal structure, imaging method and circuit of PSPMT , analyses the circuit of data acquisition with PSPMT and NaI(Tl) and the design of microcomputer interface.
介绍了位置灵敏光电倍增管的内部结构、成像方法和电路，分析了用位置灵敏光电倍增管和闪烁晶体组成的数据采集电路及微机接口的设计。
The microcomputer automatic test platform, which was used to test the on-off situation and isolation, is composed of the special interface and general test platform.
导弹地面电缆网通断和绝缘测试的微机自动检测平台，包括专用接口及通用测试平台。
The machine adopts microcomputer control, friendly human-machine interface, easy to operate, suitable for all kinds of motor rotor winding of high quality and high efficiency.
本机采用微电脑控制，中文人机操作界面，操作简便易学，适合各种马达转子的高品质、高效率绕线。
Hardware of the remote controlling system is mainly composed of Single Chip Microcomputer (SCM) controlling circuit, USB interface circuit and wireless transceiver.
远程控制系统的硬件主要由单片机控制电路、USB接口电路、无线收发模块构成。
Uses the microcomputer and the back light liquid crystal display monitor as the man-machine operation interface, has the ration setting, reset and the ration production function.
采用微计算机及背光液晶显示屏作为人机操作界面，具有定量设定、清零与定量生产功能。
The electronic collimation system is made of microcomputer W77E58, electronic compass TCM-20, communication interface and el display.
电子瞄准镜系统由单片机w 77e58，电子罗盘t CM - 20，通信接口，EL显示屏组成。
This paper describes the interface method to the dot array liquid crystal display and 8031 single chip microcomputer, the program chart is given.
讨论了点阵式液晶显示器与8031单片机的接口方法，给出了程序流程图。
This article concerns with designing both hardware and software of a GP-IB interface with the 8031 single-chip microcomputer, the results of relevant experiments are also presented.
本文讨论运用8031单片微型计算机实现GP -IB接口的硬件及软件的设计方法，并给出实验结果。
Microcomputer control, menu interface, PVC operation panel, and large LCD screen display, convenient user fast operation.
微电脑控制、菜单式界面、PVC操作面板、以及大液晶屏显示，方便用户快速操作。
The circuit of analog input, reference input and the serial digital interface with microcomputer of AD7710 is presented.
阐述了AD 7710的模拟电压输入、基准电压输入以及与微处理器的数字接口电路。
Publishing House of Electronics Industry, " Microcomputer Principle and Interface Technology" 8086 assembly language support system PDF.
电子工业出版社《微机原理与接口技术》8086系统汇编语言配套PDF。
The forms of CRT waveform display controlled by microcomputer system is described. The interface for displays of the characters and waveform is introduced.
叙述了由微机系统控制的CRT波形显示方式，介绍了字符和波形显示接口电路。
The thesis discusses the interface of 840DE numerical control system made in siemens, and the mechanism of storage . It further put forward a way of communication between it and microcomputer.
论述西门子840DE数控系统的接口形式、文件存储机理，提出它与微机间的硬件联接及软件编程方案。
Interface circuit and the design of control program in asynchronous transfer mode between AT89C51 single chip microcomputer system and intelligent MODEM are introduced.
介绍AT 89 C51单片机系统与智能调制解调器MODEM之间的接口电路和异步传输方式下的控制程序设计。
IBM PC and single chip microcomputer communication hardware circuit, software interface and measure to improve reliability of communication.
IBMPC机与单片机通讯的硬件电路、软件接口以及提高通讯可靠性的措施。
Adoption INTEL80C51 single chip microcomputer as control core for producing pure hydrogen, it can control production the craft with necessary interface circuit and power amplifier circuit.
采用INTEL 80c51单片机做为纯氢发生器的控制核心，配备必要的外围接口电路及功放电路对制氢生产工艺进行控制。
This paper presents the interface technique including hardware instruction and software modular for reading and writing the floppy disk with 8098 microcomputer.
本文介绍了用中断方式实现8098单片机读写软盘的接口技术，包含软件模块和硬件结构。
The initializing program design problems of the Single -Chip Microcomputer (MCS51 series) and interface chip in common use (8255A/8155 series) are reviewed in this paper by application instance.
本文通过应用实例，介绍了如何对单片机（MCS51系列）和常用接口芯片（8255A、8155系列）进行初始化程序的设计问题。
This paper introduces the functions and work principles of serial clock chip DS1302, the design of interface circuit with AT89C51 single -chip microcomputer in the spray irrigation controller.
本文介绍了串行时钟芯片DS1302的功能和工作原理，并给出ds1302在灌溉控制器中与AT 89 C51单片机的接口电路设计。
Making use of microcomputer techniques, the interface collects information from common control exchange HJ-921 and repeats called subscriber number to rural telephone exchange.
该接口利用微型计算机技术从HJ—921型交换机的公共控制设备采集，并向农村支局自动交换机转发被叫用户号码。
According to the feature between programmable ASIC and MCS51 single chip microcomputer, authors analyze the interface methods between them.
针对可编程ASIC和MCS51单片机的特点，对两者之间的接口方式进行了分析。
The project graph plotter with a VPI interface is widely used in seismetic data processing and logging data processing. But microcomputer cannot drive it under WINDOWS operation system.
VPI接口的工程绘图仪在地震资料与测井资料数据处理中使用广泛，但它们无法在微机WINDOWS操作系统下联机驱动。
The data communication between SCM and microcomputer was achieved by the USB interface, and the barcode data uploading was performed.
通过USB接口实现单片机与微机的数据通信，完成条形码数据的上传。
应用推荐