This paper proposes a design method of communication platform, which is divided into two layers, bottom is communication layer and top is communication proxy layer.
文章提出了一种分层式的通信平台设计方法，即将通信平台分为通信底层和通信代理层。
Then the Protocol in each layer has been analyzed and the design method has been put forward accordingly.
接着对每一层传输协议进行了分析，提出了相应的设计方法。
In this paper, the stresses in a composite concrete pavement are analysed by means of finite layer method. Through calculation and analysis, a practical design method is presented.
本文采用有限层法对复合式水泥混凝土路面结构进行应力分析，通过计算与分析，提出了能满足精度要求的实用设计方法。
The paper presents a method of design on the layer equalizer to solve the problem.
文章针对该问题提出了一种分层均衡器设计的方法。
The whole structure of the system was also introduced and the design method of node composing of physical layer and MAC layer protocol were given.
文章还介绍了系统的整体结构，针对系统的物理层节点构成、MAC层协议给出了具体的设计方法。
The improvement of tool design and development of data post-processing method should be aimed at this distorting mechanism, otherwise the real situation of thin layer will not be reconstructed.
必须针对这种失真的机理来改进仪器设计和开发后处理方法，才可能重现薄层的真实情况。
This method allows the design elements of each layer to refer directly to those of the layers and common architecture on which it depends.
此方法允许每层的设计元素直接引用其依赖的各个层和公共体系结构的设计元素。
The N-layer platform structure is presented and discussed in detail, especially the key design pattern, some difficulties and the technical implementation method.
本文还重点介绍了该平台的N层体系架构，特别对其中的难点和关键的设计思想，及其实现的技术路线进行了详细的探讨和说明。
This paper primarily discussed the design method of foundation of main floor and annex in the high layer building, and its structure does not establish to.
本文主要论述了在高层建筑中不设沉降缝而对高层主体与裙房之间进行的设计与构造处理。
An improved design method on pattern classifier based on multi-layer perceptrons (MLP) by means of minimum classification error (MCE) training was proposed.
提出了一种基于最小分类错误(MCE)训练的采用多层感知器(MLP)结构的模式分类器设计方法。
The wear resistance of surfacing layer was investigated by the design of flux-cored wires and tig welding method.
通过药芯焊丝配方的设计，结合TIG焊接方法，对堆焊层的耐磨性进行了研究。
Using software method, we design and implement a management layer of server cluster and a communication layer for parallel fault-tolerant network.
在服务器集群的实现中，我们采用了软件集群的方法，设计实现了服务器集群管理层和并行容错通信层。
Method Using the height of oil layer in the centrifuged emulsion as evaluating criterion, the main factors that affect the stability of emulsion were selected by orthogonal design method.
方法采用正交设计法，以所制乳剂离心分层油层的高度为考察指标，对影响乳剂稳定的主要因素进行优选。
This paper, by way of researching on several kinds of real-circumstance factory nets, illustrates the application method of three-layer network in the design and network of Distributed Control System.
本文通过工厂实际组网的几种情况研究，阐明了三层网络技术在集散控制系统设计和组网中的具体应用方法。
This paper introduces the theory, construction technique, technique, construction design calculating method and operation method of deep layer agitation method.
介绍了水泥深层搅拌法的原理、施工技术及工艺，施工设计的计算及操作方法。
And a new method is proposed to design the hidden layer of RBF network by dynamic and static style;
提出动静相结合的隐含层设计方法来构造出较优的隐含层结构；
The paper presents a method to design wide-ratio pole-changing motor by using single-layer winding and phase changing.
本文介绍了用单层绕组和换相法设计远极比变极电机的方法。
Using software method, we design and implement a management layer of server cluster and a communication layer for parallel fault-tolerant netwo…
在服务器集群的实现中，我们采用了软件集群的方法，设计实现了服务器集群管理层和并行容错通信层。
This method can be put into practice easily. The analysis result is of guidance value to acoustic structural design of sonar platform area, choice and collocation of acoustic viscoelastics layer.
本方法比较实用，分析结果对平台区结构声学设计、声学材料选型和布置形式具有指导作用。
The paper also describes the design of each layer and database. At the end, introducing the method of modeling business process and describing the key technology of realizing the system by using code.
最后对质检管理系统中涉及的业务流程进行了建模，结合代码，重点描述了系统实现的关键技术，以及相应各层的实现细节。
The paper analyses the drainage method of the same layer extracted in housing design, compares the major characteristics.
厨房、卫生间同层排水方式比传统的排水方式有明显的优越性。
In this paper set forth the method of symmetric design for three-phase double layer asymmetric fractional slot winding.
阐述不对称三相双层分数槽绕组的对称化设计方法。
At last, the low-reaction boundary layer suction compressor concept and its design method is proved by the comparison of the experiment data and numerical results.
通过对实验测量数据与数值结果的对比，验证了低反动度附面层抽吸式压气机概念及其设计方法的可行性。
Using software method, we design and implement a management layer of server cluster and a communication layer for parallel fault-tolerant...
在服务器集群的实现中，我们采用了软件集群的方法，设计实现了服务器集群管理层和并行容错通信层。
Has given based on the relations database single-layer raid of detailed list database design method.
给出了基于关系型数据库的单层批次清单的数据库设计方法。
Next, in the part of data preprocessing, we design a method of collecting click-stream data in the application server layer and preprocessing them with real time;
接着，在数据预处理部分，设计了在应用层收集点击流数据并且对其进行实时预处理的方法；
The solution to the cross-layer design is modeled as a Markov decision process and utilizes the linear programming method to obtain the optimal adaptive transmission policy.
该跨层设计将问题的求解建模为马尔科夫决策过程，利用线性规划推导出最优的自适应传输策略。
The research work involves reliability calculation method, wind-induced analysis, sensitive analysis and reliability-based design method of the cable-stayed double-layer cylindrical latticed shell.
本文以斜拉双层柱面网壳结构为研究对象，对可靠度计算方法、风致响应分析、敏感性分析和基于可靠性的设计方法等方面进行了研究。
Finally, the performance measures followed by an optimization method to catch the best amount of parameters in the cross-layer design are presented.
论文还给出了优化后的性能测试方法，以获得最好的跨层设计参数。
Finally, the performance measures followed by an optimization method to catch the best amount of parameters in the cross-layer design are presented.
论文还给出了优化后的性能测试方法，以获得最好的跨层设计参数。
应用推荐