Internal flow Road evenly reasonable design, distribute streaming delicate.
内部流道均匀设计合理，分流细腻。
Consider a row of guide vanes in a compressible internal flow as shown below.
如下图所示，考虑可压缩内部流中的一排导流叶片。
This describes the detailed attributes, internal flow, and structure of the component.
此步骤描述组件的详细特性、内部流和结构。
The complex internal flow has made volute to be one of the component costing most loss.
蜗壳内部的流动现象十分复杂，是损失最大的元件之一。
The paper displays the distribution of several key parameters in the internal flow field.
文中给出了水泵内部流场影响性能的几个关键参数的分布规律。
This program can be applied to the analysis of internal flow fields in water and oil pumps.
本程序可运用于水泵，油泵等内部流场的分析。
In the text the internal flow of cross-flow fan is simulated with Computational Fluid Dynamics.
本文利用计算流体力学方法对空调器贯流风机系统内部气体流动进行了数值模拟；
In a steady internal flow the Mach number can only reach 1 at a minimum in the cross-sectional area.
在一个稳定的内部流动马赫数只能达到一在最低限度，在截面积。
The internal flow field characteristic of vane damper is very important for a good damping performance.
叶片式液压减振器内部流场特性对减振器的阻尼工作性能优劣至关重要。
In comparison with the axial turbomachinery, the internal flow in centrifugal compressors is more complex.
与轴流式叶轮机械比较，离心式叶轮机械内部的流动更加复杂，亟待解决的问题也更多。
Under these conditions, particles slide on themselves rather than the hopper walls, and an internal flow channel develops.
在这些条件下，粒子不是沿着料斗壁面滑动，而是沿着粒子之间的壁面滑动，这样一个内部通道就形成了。
This model also can be used for the internal flow calculation of any two-dimensional diffuser and for improving its design.
本文的计算方法还可以应用于任意二维扩散器的内部流动计算，用来指导改进扩散器的设计。
The paper presents some research works on the internal flow shock wave measurement of transonic compressor by PIV technique.
在跨音压气机试验台上进行了用PIV技术测量内流激波结构的试验研究。
The results show the many important phenomena of the internal flow and their development in the multi-blade centrifugal fan.
研究结果揭示了多叶离心式通风机内一些重要的流动特征及其变化规律。
The internal flow field of a single-stage axial compressor is analyzed using a fast full 3-D viscous flow calculating method.
采用一种快速求解三维粘性流场的计算方法求解轴流压气机的内部流场及全工况特性。
Therefore, the study for internal flow characteristics of Kaplan turbine has important theoretical and practical significance.
因此，展开轴流转桨式水轮机内部流动特性的研究具有重要经济意义。
The internal flow field of multi-turbine is studied by CFD software, and the simulated pressure drops and torques are discussed in this paper.
应用CFD软件对涡轮钻具组的内流场进行了分析研究，重点讨论了模拟压降和扭矩。
The erosion mechanisms of dendritic main air distributor of FCC unit is analyzed by numerical simulation of internal flow field of distributor.
通过对催化裂化装置再生器树枝状主风分布管内流场的数值模拟，分析了树枝状主风分布管磨损的机理。
This paper sets up a calculation model to solve the internal flow of multistage centrifugal pumps and a flow calculation program is worked out.
本文成立了多级离心泵导叶内部流场的计较模子，体例了活动计较措施。
Any advances in the internal flow of centrifugal turbomachinery was obtained with the development of measurement techniques and numerical methods.
随着测量技术及数值算法的不断进步，叶轮机械内部流动研究有了很多新的进展。
The internal flow fields in scramjet are very complex, due to the interaction of shock waves, expansion waves, boundary layer and strong reactions.
超燃冲压发动机的内部流场很复杂，存在激波、膨胀波、附面层和剧烈的化学反应等相互作用，给数值模拟带来很大的困难。
The performance test results of test fan are in agreement each other with those of internal flow visualization studids and exit velocity distributi…
试验风机的气动性能试验和内部流场可视化与出口流速分布试验的结果彼此吻合。
The performance test results of test fan are in agreement each other with those of internal flow visualization studids and exit velocity distribution test.
试验风机的气动性能试验和内部流场可视化与出口流速分布试验的结果彼此吻合。
There is an urgent need to understand the internal flow slurry pump to improve the design methodology, improve pump efficiency and reduce pump wear and tear.
因此迫切需要了解渣浆泵的内部流动规律，改进设计方法，提高泵的效率，减少泵的磨损。
Based on the numerical results, the internal flow field was analyzed with the emphasis on flow loss. The analysis is very valuable for torque converter design.
基于计算结果，从流场损失的角度对变矩器内流场进行了细致的分析，为提高变矩器设计水平提供了有力的理论依据。
The influence of the front shaped monolith on the internal flow of an automotive catalyst converter was studied by using computational fluid dynamic method (CFD).
采用计算流体动力学(CFD)的方法，在一典型催化转化器结构的基础上，研究了催化转化器载体前端造型对其内部流动特性的影响。
The returned carrier fluid enters the internal flow path at the base of the tool before crossing over to the annulus above the packer assembly, isolating the annulus.
在转换至封隔器装置上面的环空以前，回流的携带液在工具底部进入内部流动通道，于是将环空隔离。
The results showed that: the welding current and surface tension temperature coefficient has a critical influence on the internal flow of weld pool and determines the shape of TIG welding pool.
结果表明，焊接电流和表面张力温度系数对熔池内部流动有着至关重要的影响，决定了TIG熔池的截面形貌。
The results showed that: the welding current and surface tension temperature coefficient has a critical influence on the internal flow of weld pool and determines the shape of TIG welding pool.
结果表明，焊接电流和表面张力温度系数对熔池内部流动有着至关重要的影响，决定了TIG熔池的截面形貌。
应用推荐