In this paper, an improved design method of flight control systems with stable robustness is introduced.
本文提出了一种改进的稳定鲁棒飞行控制系统设计方法。
An improved design method on pattern classifier based on multi-layer perceptrons (MLP) by means of minimum classification error (MCE) training was proposed.
提出了一种基于最小分类错误(MCE)训练的采用多层感知器(MLP)结构的模式分类器设计方法。
The paper also describes the improved design method of motorcycle engine exhaust system which reduces the exhaust noise and the measures the motorcycle should take during its operation.
介绍了为降低排气噪声而改善发动机排气系统设计的方法和摩托车使用过程中应采取的措施。
Conclusion the efficiency and accuracy of CMI calculation can be improved through optimizing the classification design and calculating method in computer programming.
结论在计算机程序设计中，通过对分组设计及计算方法进行优化，提高了计算cmi的效率及准确性。
Applying the method of orthogonal design can reduce the quantities of computation greatly, and the quality of the computation can be improved.
采用正交设计方法，大大减少计算次数，提高计算质量。
Combined with the problems during the experiment, design a improved testing circuit of Direct Current Attenuation Method.
结合试验过程中遇到的问题，给出了改进的直流衰减法测试电路。
To meet the rapid and intelligent requirement of radar fault diagnosis, a design method of radar fault diagnosis system based on improved BP algorithm is introduced.
为适应雷达故障诊断快速化、智能化的要求，介绍了一种基于改进的BP算法的雷达故障诊断系统设计方法。
The structure design of cylindrical tank with hand lay-up process were introduced, the improved method of liner forming process were provided.
本文介绍了手糊成型玻璃钢圆柱形容器的结构设计，并对内衬层成型工艺提出了改进方法。
This paper introduces an improved contour optimum design method on contact surface.
介绍一种改进的接触面外形优化设计方法。
The paper introduces role and design method of improved test pushing device , and discusses its technical and economic benefits .
介绍了改进型试推装置的作用，设计方法，并就其技术经济效益进行了论述。
This paper presents briefly the application of the "improved" fully stressed design (FSD) method to fuselage structure design.
本文扼要介绍了“改进的”满应力设计方法(FSD)在机身结构设计中的应用。
The method support vector machines in returning essence, and the return pan-robust ability of vector machines is improved through reasonable design.
该方法从支持向量机的回归本质出发，通过更加合理地设计隶属度函数，提高支持向量机的回归的泛化鲁棒能力。
The SEL and the absolute bias approach for parameter design are studied and improved, on the basis of which the variable compartment iteration searching method is advanced in this paper.
对参数设计中序贯淘汰水平法(SEL)和绝对偏差法进行了研究和改进，提出了以SEL法与绝对偏差法结合为基础的自动变间隔迭代搜索法。
By analyzing factors impacting upon the embedded system performance, an embedded system design method based on thread ideas is used, performance is improved with instruction level parallelism.
通过分析影响嵌入式系统性能的主要因素，采用了基于线程概念的嵌入式系统并行设计方法，利用指令级并行来改善系统性能。
The code design method is also improved, and some better new codes have been found.
文中对好码的设计方法也做了改进，并且找到了一些性能更好的新码。
Compared with traditional method, the new system is more expansible and reusable, and the difficulty of system design is lowered, so that the quality of the design is improved.
与传统方法比较，面向对象方法使系统具有更好的可扩展性和可复用性，降低了系统设计的难度，提高了系统设计的质量。
Based on above method, multiple experts can perform distributed design of fixture scheme and the quality and efficiency of fixture design may be improved.
该方法可以实现多专家分布进行夹具方案设计，以提高夹具设计的质量和效率。
Based on the improved model, this paper applies a new PID and PID-like controller design method to AQM controller.
基于改进的模型，把一种基于D域稳定的PID及类PID设计方法用于AQM控制器的设计。
A practical example showed that the efficiency of pumps with low specific-speed could be improved by using the calculation method presented, so that the design theory of such pumps was substantiated.
实例表明：提出的计算方法能够提高低比转速离心泵的效率，充实了低比转速离心泵的设计理论。
The design method of submersible motor was improved, and the design precision was enhanced.
改进了潜油电机的设计方法，提高了其设计精度。
So the packing that design method is improved has good economic and social benefit and longer lifetime.
经改进设计的盘根密封性能良好，使用寿命明显延长，具有良好的经济效益和社会效益。
To raise efficiency of production, reduce waste products and costs, design method was improved, the method was good, and was fit to large quantities prodution.
为了提高生产效率、减少废品、降低成本，从根本上改进了设计方法，效果良好，适合大批量生产。
This paper puts forword a improved method to make up the insufficiency of actual decoupling design for motor power assembly mounting system .
针对现行的发动机动力总成悬置系统解耦设计方法的不足，提出了一种针对发动机主要激振力（矩）进行解耦设计的改进方法。
The main technical indexes of electric barrier, as integration of mechanics and electrics product, can be improved as a whole with system design method and key technologies synthetically analyzed.
电动栏杆机作为机电一体化产品必须采用系统设计思路，综合分析各系统设计的关键技术，才能整体提高栏杆机的主要技术指标。
The practice indicated that the developed method effectively ensured the assembling capability of components and improved design automation.
系统开发实践表明：基于装配模型的开发方法有效地保证了零件设计的可装配性，提高了设计自动化程度。
The developed cycle is shortened, the design quality is improved. The design cost is shortened through this method.
该方法大大缩短了产品开发周期，提高了产品设计质量，降低了设计费用。
The developed cycle is shortened, the design quality is improved. The design cost is shortened through this method.
该方法大大缩短了产品开发周期，提高了产品设计质量，降低了设计费用。
应用推荐