In this configuration, you have used zones where each HBA on each host sees only one controller on the relevant DS4500.
在本例的配置中，曾用到过专区，在这些专区中，每个主机上的每个HBA只能看到相关DS4500上的一个控制器。
Each host USES a different connection to the controller to spread the load and maximize the throughput.
每个主机使用不同的连接连至控制器以分散负荷及最大化吞吐量。
This layer is literally the interface between the host (your computer) and the controller (the Bluetooth device).
这一层顾名思义就是主机(计算机)和控制器(蓝牙设备)之间的接口。
HCI command Packets: commands are issued by the HCI Driver to the Host controller.
HCI命令数据包：命令(command)由HCI驱动程序发至主机控制器。
To ensure precise correlation, synchronize the system time on the Rational Performance Tester host controller, agent, and all servers under test.
为了确保联系精确，将RationalPerformance Tester主机控制器，代理以及测试下所有服务器上的时间调至同步化。
As with PCMCIA, the Linux device drivers for the individual USB devices do not depend on the host controller.
由于具有PCMCIA，单个usb设备的Linux设备驱动程序不依赖于主机控制器。
The device descriptor read by the host controller driver contains information about the device, such as class, subclass, and protocol.
主机控制器设备驱动程序读取的设备描述符包含关于设备的信息，例如class、subclass和protocol。
At the switch fabric, I put the first WWPN of the host HBA into one zone, along with a WWPN of storage controller a.
在switchfabric，我将主机hba的第一个WWPN与存储控制器a的一个WWPN一起放入一个区域。
We're injecting each of those references by their key into the host Object (our web controller).
我们通过方法对应的键将那些引用注入host对象(我们的Web控制器)。
On the host page, select the host for the Agent Controller.
在Host页面，选择代理控制器的主机。
The Linux card services core interacts with the host controller device driver, the card device drivers, and the user mode cardmgr daemon.
linux卡服务核心与主机控制器设备驱动程序、卡设备驱动程序及用户模式cardmgr后台进程交互。
In the popup, enable the "enable Active Directory authentication" check box and fill out the desired namespace name and the host and port number of the Active Directory Controller.
在弹出窗口中，选中enableActiveDirectory authentication复选框，填充active DirectoryController的名称空间、主机和端口号。
Once you've built your scripts controller, you have a whole host of options for executing scripts using the Zend Framework.
在构建了脚本控制器后，您有许多选项可用于通过Zend框架执行脚本。
USB host controllers follow one of two standards: UHCI (Universal host controller Interface) or OHCI (Open host controller Interface).
usb主机控制器遵循两个标准之一：UHCI(通用主机控制器接口)或OHCI(开放式主机控制器接口)。
All the data transfers are initiated by the host controller.
所有传输的数据都是由主控器发起的。
The host controller will automatically post an interrupt at a specified interval.
主控器会以特定的间隔自动发出一个中断。
The Bluetooth specification includes the definition of a standardised interface (the Host Controller interface) to the hardware of a Bluetooth communications module.
蓝牙规范包含了一个符合标准的接口定义(主机控制器接口)，它适用于蓝牙通讯模块的硬件部分。
The controller 218 converts commands from the host into command signals that can be interpreted and executed by command circuits 214, which are in communication with the state machine 216.
控制器218将来自主机的命令转换为可由与状态机216通信的命令电路214解译和执行的命令信号。
HCI event Packets: the Host Controller notifies the HCI Driver of events.
HCI事件数据包：主机控制器以事件(event)通知hci驱动程序。
The Bluetooth specification also defines standard mechanisms for transmitting HCI packets between an HCI Driver and Host Controller, via a Host Controller Transport Layer such as.
蓝牙规范也定义了数个标准机制，通过一个主机控制器传输层(Host ControllerTransport Layer)，在HCI驱动程序和主机控制器之间进行HCI数据包的传输，这些传输层包括。
The controller 218 communicates with the host in order to receive commands and data from the host, and provide data and status information to the host.
控制器218与主机通信以便从主机接收命令和数据，并向主机提供数据和状态信息。
The paper presents the interface specification of USB host controller based on UHCI, analyzes the implementation of hardware layer in USB stack.
介绍基于UHCI的USB主机系统的硬件核心主机控制器接口规范，分析US B协议栈的硬件层实现。
The controller 218 is connected or connectable with a host system such as a personal computer, a digital camera, personal digital assistant, etc.
控制器218与或可与例如个人计算机、数码相机、个人数字助理等主机系统连接。
This paper introduced the communication principle of USB2.0' protocol layer and the division, design and realization of the core part of USB2.0' host port controller.
本文简要介绍了USB2.0协议层的通信原理，描述了USB2.0主机端控制器核心部分的划分、设计及实现。
This paper designed and implemented a USB host controller soft core that can be used in mobile devices.
本文的目的就是要设计并实现一个可集成在便携、移动产品上的USB主机控制器软核。
At last, the development of motion controller driver software and host application program is finished, and the results of the applied experiments show the CNC software system is satisfactory.
最后，我们完成了运动控制器驱动程序和开放式数控系统应用程序的开发工作，并在实际应用中取得了满意的效果。
The HCI protocol is the communication protocol between the host and host controller to provide a uniform method accessing Bluetooth host controller capabilities.
HCI协议是主机和主机控制器之间的通信协议，提供了统一访问蓝牙主机控制器的能力。
It does not need to study complicated details of Bluetooth specification that create communication between Bluetooth host and host controller via HCI.
通过HCI进行蓝牙主机与主机控制器之间通信，可以避免深入研究蓝牙低层传输协议而建立起蓝牙无线连接。
USB host controller is being used widely in the embedded system.
US B主控制器的嵌入式应用越来越广泛。
The communication link way, communication commands and communication data structure between host computer and OMRON V600 Series RFID controller are introduced.
介绍上位机与欧姆龙V600系列RFID控制器串行通信连接方式、通信命令和通信数据帧格式。
应用推荐