The third chapter, LED display system hardware design and realization.
第三章，LED图文信息显示系统硬件部分的设计与实现。
A new extensible multi-function vehicle terminal system is designed, and the software and hardware design and realization method are also introduced.
该文提出一种新型的多功能可扩展车载终端系统的设计方案，介绍了系统的硬件和软件设计以及实现方法。
Puts emphasis on hardware design and realization of data acquisition module and the HPI communication module and other peripheral circuits of TMS320C6713.
本文着重阐述了信号采集放大、HPI通信模块以及TMS320C 6713的其他外围电路的硬件设计与实现。
The paper mostly introduces the hardware design and realization of bluetooth data collector and structure of bluetooth measure system based on EPA standard.
文章重点介绍了基于EPA标准的蓝牙数据采集器的硬件设计与实现、基于EPA标准的蓝牙测控试验系统的组成结构。
A design scheme of digital image processing system is presented, and hardware design and realization of digital image processing system based on TMS320C5402 is discussed.
提出了一种数字图像处理系统的设计方案，并阐述了基于TMS320C 5402的数字图像处理系统的硬件设计和实现。
Then the design and realization of the control subsystems of hardware and software were discussed respectively.
接下来从硬件和软件两个方面重点讨论了数字硬盘录像控制子系统的设计和实现。
This article introduces solution selection, system design, hardware and software realization of combined automobile navigator.
本文介绍了组合车辆导航仪的方案选择、系统设计和硬软件的实现。
The paper focuses on the hardware design of vector signal processing module and the software realization of cross'spectral algorithm.
着重介绍了矢量信号处理模块的硬件设计以及互谱算法的软件实现。
The design of CAN bus hardware interface circuit based on SJA1000, the selection of chips, the design of software and the realization of CAN communication are expatiated.
论述了基于SJA1000的CAN总线的硬件接口电路的设计、芯片的选择、软件设计及CAN通信的实现。
Then introduces the system design principle and the Ethernet interface module's hardware realization method in details.
然后详细介绍了系统设计原则以及以太网接口模块的硬件实现方法。
This paper presents the realization on serial communication of AT89C52 SCM and PC, including hardware structure and software design.
本文介绍了AT 89 C52单片机与PC机之间串行通讯实现，包括硬件结构及软件设计。
The key techniques of this thesis are hardware design and software porting of wireless handheld unit and the realization of wireless communication.
本文的重点是无线点菜机的硬件设计和软件移植以及无线通信等关键技术的实现。
This thesis provides the composition, design and realization of virtual instrument technology's hardware which gears dynamic data collecting & analyzing system.
提供了直接面向操作者的动态数据采集分析系统的虚拟仪器硬件构成、设计与实现。
This paper presents the design of a monitoring terminal for distribution transformer based on C8051F020MCU, introduces the realization methods of hardware and software.
文章主要介绍了以C8051F020单片机为核心的配电变压器监测终端的设计方案，并给出了硬件和软件的实现方法。
The hardware design and software realization of the system were introduced in detail.
详细介绍了该系统的硬件设计和软件实现。
This paper introduces the design and realization of double-channels blood volume measuring system, which mainly consists of hardware and software parts.
本文介绍了双通道血流容积测量系统的设计与实现。系统包括硬件与软件两个部分。
The paper introduced the overall design of system, described the system hardware, software and realization method.
介绍了系统的总体设计，论述了系统的硬件、软件及实现方法。
Working Process, structural principle, sensor selection and the design and realization of the hardware and software regarding the on-line time detecting system for watermark label are introduced.
介绍了水印标记在线实时检测系统的结构原理、工作过程以及传感器的选择、硬件和软件的设计与实现。
This paper describes the control method of winding machine using microcomputers. The design principle and realization diagram of system hardware and system software is also given out.
本文介绍了采用微型计算机实现绕线机控制的方法，并给出了设计原理、系统硬件和软件的实现框图。
This article discusses the design conception of BIT in radar system, and introduces the concrete realization methods of hardware and software.
论述了雷达bit的设计思想，并介绍了一种具体的硬件和软件实现方法。
This thesis introduces the hardware design and the software realization for the intelligent circuit breaker on the central of microprocessor 80c196kc.
本文介绍以80c196 KC单片机为核心的智能型断路器的硬件设计和软件实现。
We put emphasis upon systemic hardware design, discuss the sequence control of CPLD, Register control of image sensor, and hardware exploiture, software realization, empirical analysis of DSPs, etc.
并着重研究了系统的硬件设计，讨论了CPLD的时序控制、图像传感器的寄存器控制以及DSP芯片的硬件开发、软件实现、实验分析等等。
This paper Makes a deep research in the software and hardware realization of fault location system with radial feeders, stressing on the design of the hardware system and software programming scheme.
本文对基于“递进信息法”的配电网馈线故障定位系统的硬、软件实现进行了较深入的研究，重点设计了硬件系统和软件编程方案。
The paper introduces structure of wireless data transmission system, and expounds realization of hardware design circuit and software of DTU based on C8051F020 microprocessor and CDMA module MG801A.
对无线数据传输系统的构成进行了研究，阐述了基于C8051F 020微处理器和CD MA模块MG801A的数据终端的硬件设计电路和软件接口的实现。
At node design aspect, this pa-per analyzed how to select communication elements and transmission medium in hardware design and discussed control strategy realization in software design.
对节点硬件设计中的通信器件与传输介质选取进行了分析，并探讨了控制策略在软件设计中的实现。
The Paper also describes the wireless intelligence modem hardware and the software design and the realization based on GPS, CDMA and WLAN protocols, as well as related function.
描述基于GPS，CDMA和WLAN的无线智能调制解调器的硬件及软件的设计与实现，以及相关功能。
The analysis result shows that the design of hardware platform is the solid base of many kinds of algorithm verification, production design and SOC realization for image fusion.
分析结果表明，该硬件平台为多种融合算法验证、产品设计和SOC芯片级实现奠定了坚实的基础。
In this paper, the functions and principle of a glucose analyzer is discussed and the design and realization of hardware, software and sensor is also presented in detail.
本文对血糖分析仪的功能和原理进行了分析，并介绍了血糖仪的硬件、软件和传感器的设计和实现方法。
The development and realization of the system structure, hardware design, communication network and the software design of the monitoring system are introduced.
给出其整体结构、硬件设计、系统通信网络方案以及系统软件的开发和实现。
The development and realization of the system structure, hardware design, communication network and the software design of the monitoring system are introduced.
给出其整体结构、硬件设计、系统通信网络方案以及系统软件的开发和实现。
应用推荐