This Article discussed the theory, legislation models, condition and force of bankruptcy relief through historic analysis method and comparative analysis method.
本文主要采用历史分析方法和比较分析方法，对破产免责的理论、立法例、条件和效力进行了分析。
In addition, according to experimental results, slab method in plastic mechanics and material hardening theory, a new formula for hole flanging force is concluded.
另外，根据试验结果，并利用塑性力学中的主应力法和材料硬化理论，推导了一个计算圆孔翻边力的新公式。
A dynamic model for maize stem is established, a formula about critical force of maize stem is extracted by using dynamic theory and method.
建立了玉米茎秆的力学模型，利用力学理论和方法，给出了玉米茎秆临界力的具体表达式。
The method of grasping force control of rubber muscle using VSS theory is discussed.
探讨了用变结构系统理论实现人工肌肉夹持力控制的方法。
Based on the unsaturated soil strength theory and limit equilibrium method, this paper obtains the calculating formulae for the roadbed stability under the effect of seepage force of rain.
采用非饱和土强度理论和极限平衡法，得出考虑降雨入渗渗流力作用下的路基稳定性计算公式。
It firstly derivates theoretical analysis formula of force and stroke by using beam bending theory and energy method.
首次采用梁的弯曲理论和能量法结合的方法推导了弯曲力和行程的理论解析公式。
The theory and method of bending test on nanobeam for the measurement of Young's modulus based on atomic force microscope (AFM) are introduced.
阐述了基于原子力显微镜(afm)的弯曲测试测量纳米梁杨氏模量的理论和方法。
Compared with the cutting force theory formulae before, the cutting force value calculated by the method is more coincident with the practical measuring value.
与以往的切削力理论公式相比，用该方法计算出的切削力值更接近于实测值。
Trust force and bending moment result in heat expansion are calculated by adopting beam theory of mechanics of materials and applying force component analysis method.
采用材料力学的梁理论，应用力法分析方法，计算出热膨胀导致的推力和弯矩。
The depending on the analysis of main factors affecting the air Force air materiel supply site selection, a preference site selection method based on rough sets theory is presented in this paper.
在分析空军航材供应点选址影响因素的基础上，提出了用粗糙集理论求解偏好选址问题的方法。
Based on the theory of four-end network, the equivalent electric circuit diagrams of the horn are given by using the analogous method between methanical force and electric.
依据四端网络的基本原理，利用力电类比的方法，给出了复合变幅杆的等效电路图；
The force center theory and the design method with the theory is established for bi axial self synchronous shaker with elliptic plane movement.
建立了双轴自同步平动椭圆振动筛的力心理论和利用力心理论设计的方法。
The theory and method of measuring the electrostatic force and the permittivity of vacuum in parallel plate capacitor by electronic balance are introduced.
介绍了用电子秤测量平行板电容器两极板间的静电力和真空电容率的原理和方法。
The method of combining theory and experimentation is used to study the law of movement and characteristic of receiving force of the medium - balls in annular gap mill.
用理论结合试验的方法研究了环缝磨内介质球运动规律和受力特性。
The paper brings the conception of seepage force and use finite element method to analyze rock slope stability under rainfall, based on unsaturated earth drained shear strength theory.
本文以非饱和土抗剪强度理论为基础，引入了渗透力的概念，利用有限单元法进行了降雨条件下岩质边坡稳定性的分析。
The theory and method of bending test on silicon nanobeam for the thickness measurement based on atomic force microscope (AFM) are introduced.
阐述了基于原子力显微镜(afm)的弯曲测试测量纳米梁杨氏模量的理论和方法。
Direct thrust force control method for the linear motor in theory and experiment has been further studied.
对适合直线电机直接推力控制的方法进行理论分析和实验研究。
It focuses on the control theory and design method of master-slave medical robot system, that can implement precise teleoperation by means of force telepresence technology.
基于对主从机器人控制系统的动力学分析，研究了借助力觉临场感技术实现主从医疗机器人遥操作的控制理论和设计方法。
Generalized inverse matrix (GIM) is a new force method based on the generalized inverse matrix theory, which is an iteration method for solving material nonlinear problems.
广义逆力法是一种以力法为力学概念基础，以广义逆矩阵理论为数学理论基础，以迭代求解为求解方式的新算法。
The time series of voidage and particle colliding force at different operation conditions is analyzed and researched by statistic method-. power spectrum and chaos theory in this papers.
本文采用不同的分析方法分析、研究了气固流化床中不同操作条件下的空隙率时间序列和颗粒碰撞压力时间序列。
This paper presents an investigation on the effect of external force on internal bone remodeling by adopting the internal bone remodeling theory in conjunction with finite element method.
采用内部骨重建理论和有限元算法相结合的方法，探讨了外载荷对骨重建的作用。
By adopting limiting equilibrium theory and transport coefficient method, landslide pushing force and residual anti-slide force before pile are calculated.
利用极限平衡理论，采用传递系数法，计算膨胀土滑坡推力和桩前剩余抗滑力。
The generalized aerodynamic force required in analysis is calculated by using horse shoe vortex— vibrational pressure doublet grid method, based on theory of subsonic unsteady lifting plane.
在颤振特性分析中所需要的广义气动力是根据亚音速非定常升力面理论，采用马蹄涡—振荡压力偶极子格网法计算的。
The agglomeration of the charged dust particle is investigated by the method of electric-fluid mechanics and the transport theory of external force field.
应用电流体力学和外力场输运理论，分析了电收尘器中带电粉尘粒子的凝并现象。
Analytical method is raised to calculate the distortion on the end of seal ring by application of the theory of moment force of shell and the relevant calculation procedure is prepared.
提出了应用壳体力矩理论求解密封环端面力变形的解析解的方法，并编制了相应的计算程序。
The theory and measurement method of measuring the rolling force are correct and practicable.
用该传感器测量轧制力是正确、可行的。
The theory of Bayesian belief net is evolved, and force effectiveness evaluation model based on Bayesian belief net is built, and the method of model solution is studied in the paper.
对贝叶斯网理论进行了拓展，建立了基于贝叶斯网的作战效能评估模型，并研究了模型的求解方法。
According to the linear wave theory, the paper suggests a method that is used to evaluate the exciting force of the incident wave in finite water depth.
根据线性波理论，提出了一种计算有限水深情况下入射波激励力的方法。
According to the linear wave theory, the paper suggests a method that is used to evaluate the exciting force of the incident wave in finite water depth.
根据线性波理论，提出了一种计算有限水深情况下入射波激励力的方法。
应用推荐