A three-element composite piping made of elastic materials was studied with finite element numerical simulation.
用有限元数值模拟法研究了由弹性材料构成的三元复合管道的力学性能。
The finite element numerical simulation for the triaxial compression tests also had been carried out using the commercial software ANSYS.
并利用ANSYS软件考虑筋、土的相互作用对三轴试验进行了数值模拟计算。
The new plan of magnetic-sensing detection is presented, whose elements and structure parameters are selected with finite element numerical simulation.
对磁敏传感器和永磁磁钢的工作特性进行了研究。通过有限元仿真分析，确定了磁敏检测结构的基本元件和主要结构参数。
The experimental findings have a high reference value. For absence of the finite element numerical simulation, we cannot know each parts detail visually.
但是由于其缺乏精确的有限元数值模拟，所以无法直观地了解各细部受力情况及破坏形态。
The main contents of this paper include:(1) With the method of finite element numerical simulation, forming process of big caliber flange (JB/T4700-2000) was analyzed.
采用有限元数值分析方法，对高颈对焊法兰（国标JB/T4700-2000）的工艺过程进行了数值模拟分析。
The ablation behavior of spacecraft thermo-resistance components under blowing by oxygen-kerosene flame is investigated by means of finite element numerical simulation.
对航天飞行器防热部件在氧煤油发动机火焰喷吹下的烧蚀行为进行了有限元数值模拟。
The parameters affecting the bulging of the sheet have been studied by finite element numerical simulation method with the law of the parameters affecting the bulging obtained.
本文利用有限元数值模拟方法对影响板料胀形性能的参数进行了研究，并得出了各参数对板料胀形性能影响程度的规律。
The modern tectonic stress field of Shishen 100 area has been found by in situ testing, laboratory core experiment, logging data analysis and 3D finite element numerical simulation.
采用现场测试研究、室内岩心实验、测井资料分析及三维有限元数值模拟技术，获得了史深100地区的现代构造应力场。
The finite element numerical simulation method is an effective method in quantitatively forecasting reservoir structural fractures and determining the spatial distribution of fractures.
有限元数值模拟法是对储层构造裂缝进行定量预测并确定其空间分布的一种有效方法。
The mathematical models are amended by BP neural network algorithm, and method of finite element numerical simulation is used to compensate the removal data and extend the applied range.
应用BP -神经网络法对数学模型进行修正，建立有限元数值模拟方法补充剔除数据并对数学模型适用范围进行扩展。
The application of the finite element numerical simulation of stress-strain field distribution in the reliability study of the solder joints in microelectronic packaging has been reviewed.
就应力—应变场有限元数值模拟在微电子组装焊点可靠性研究中的应用进行了综述。
The application of finite element numerical simulation of excavation of deep foundation pit conserved by frozen soil wall is discussed, creep model and parameter of frozen soil wall is given.
讨论了有限元数值法在冻土墙围护深基坑开挖中的应用，给出了适合于冻土墙的流变模型，并进行了参数识别。
The finishing die was designed. According to finite element numerical simulation method, the filling state, load prediction and bending deformation of the local finishing process were obtained.
设计了局部精整模具，并应用有限元数值模拟方法分析了局部精整成形过程中的充填情况、成形载荷以及弯曲变形的规律。
Finite element method is used to carry on numerical simulation of fluid-structure interaction for the system of TLD, and a verification of the reliability of fluid-structure coupled mode is made.
尝试用有限元分析的方法模拟TLD中流体与结构的耦合作用，并验证了由此方法建立起来的流固耦合模型的可靠性；
In the numerical simulation of relieving residual stress by hammer peening, contact element technique was firstly adopted for establishing the finite model and calculating the hammer peening.
首次在锤击消除焊接应力的数值模拟研究中，采用接触单元技术建立有限元模型模拟计算锤击作用。
Among the numerical simulation methods, the finite element method (FEM) is widely to solve the electric field with complex structure and multi-dielectric medium with high precision.
在常用数值求解方法中，有限元法以其通用性强，适用于结构复杂、多重介质复杂场域求解，且求解精度高等优点而被广泛用于电器电场的数值求解。
Finally, applied continuous medium finite element method to proceed numerical simulation to practice project.
最终选取连续介质有限元方法对实际工程进行数值模拟。
Aim at 7075 aluminium alloy vacuum electronic beam welding, using nonlinear finite element, the numerical simulation of the residual stresses distribution in welding joint was made.
针对7075铝合金中厚板真空电子束焊接过程，采用非线性有限元法，对焊接接头的残余应力分布进行了数值模拟。
We present a parallel mesh adaptive finite element algorithm for numerical simulation of flows based on error estimation.
给出了一种流动数值模拟中的基于误差估算的并行网格自适应有限元算法。
The efficiency and viewing effect of finite element analysis can be improved by means of the visualization of numerical simulation results.
对有限元数值模拟结果进行可视化处理，可提高数值模拟结果检查、分析的效率和直观性。
Finite element method is used as numerical simulation means and a program used to calculate saturated unsaturated seepage due to surface infiltration is worked out.
采用有限元方法作为数值模拟手段，编制了考虑地表入渗的饱和非饱和渗流有限元计算程序。
In order to analyze the rules of head width reduction of slab during side pressing, a finite element model was established by method of numerical simulation.
为了分析定宽过程中板坯头部失宽的变化规律，利用数值模拟的方法建立了板坯侧压的有限元模型。
The paper provides the mathematical model of numerical simulation for metal surface hardened by plasma-arc with finite element method.
给出了用有限元方法对金属材料等离子体弧金属表面强化处理过程数值模拟的数学模型。
It makes use of finite element method to carry out the numerical value simulation by software in reality in order to get the condition of strain and deformation on the main axle installing.
利用有限元法，通过有限元分析软件对其实际工况进行整体结构数值模拟，得出主轴装置在实际工况下的应力、变形情况。
Transient numerical simulation for Bridgman method was carried out by means of deforming finite element method .
采用变形有限元法对坩埚下降法晶体生长过程进行了瞬态数值模拟。
Presents numerical simulation of multi point forming of sheet using a finite element polycrystal model.
采用有限元多晶体模型对板材多点成形过程进行了数值模拟研究。
Water Spray cooling of the high temperature plat plate was presented by using Finite Element Coupling numerical simulation.
利用有限元耦合场数值模拟计算方法进行了高温平板纯水喷雾冷却的模拟。
In this paper, the numerical simulation on the wholly rolling process of trio cross wedge rolling has been finished, by using finite element software DEFORM.
本文通过DEFORM有限元软件理论建模，对三辊楔横轧整个轧制过程进行了模拟计算。
In this paper, the numerical simulation on the wholly rolling process of trio cross wedge rolling has been finished, by using finite element software DEFORM.
本文通过DEFORM有限元软件理论建模，对三辊楔横轧整个轧制过程进行了模拟计算。
应用推荐