Through the simplification of intensity with the finite element method of data. simulation and discuss both the difference.
经由简化光强度搭配有限元素法所得到的数据，模拟并讨论两者间的差异。
By comparing the results obtained from the test and finite element analysis, a very good agreement is found, showing the accuracy and feasibility of the simulation with finite element method.
将有限元模拟结果和试验结果进行了比较，取得了较好的一致，验证了有限元分析的正确性和可行性。
The variation finite element method (FEM) using the pseudo-potential function was presented for the simulation of transonic rotational flows.
本文运用赝势函数变分有限元方法数值模拟了绕翼型的跨音速有旋流动。
A method combining indentation test with finite element simulation is proposed to obtain the ductile parameters of KDP crystal by comparing indentation depth with finite element simulation depth.
提出了压痕实验与有限元仿真结合的方法。它采用压痕深度与有限元仿真深度进行对比，可求解出KDP晶体的塑性特性参数。
By using finite element simulation method and plastic distortion theory, the author analyzes the principle of the stretch bending forming and builds finite element model of rotary stretch bending.
本文采用有限元模拟的方法，结合金属成形的塑性变形理论，深入分析了拉弯的成形机理，建立了用于转台式拉弯成形模拟的有限元模型。
We studied the model problem of controlled "dead zone" in the bone remodeling simulation in which combination of bone remodelling with finite element method was adopted.
本文研究了在采用骨再造理论和有限元法相结合的骨再造仿真中，“死区”控制模型问题。
Experiment result is well consistent with simulation which indicates that the finite element method can substitute for the stent prototype testing to some extent.
模拟与实验结果一致，表明有限元模拟可以在一定程度上替代支架原型测试工作。
This method takes advantage of the dynamic simulation function of finite element analysis and the thermodynamic theory to calculate the value of thermal flux.
该方法利用动力学分析功能，结合传热学原理求解热流传递数值；
The result uniformity of theory and test illustrates the simulation analysis method with finite element can be used to evaluate the reinforcement effect of bridge well and truly.
理论分析与荷载试验结果的一致性表明采用有限元仿真分析方法能够对桥梁加固效果进行准确的评价。
Finally, applied continuous medium finite element method to proceed numerical simulation to practice project.
最终选取连续介质有限元方法对实际工程进行数值模拟。
This paper uses the combined finite-discrete element method with smeared rotating crack model to analyze the seismic rupture process simulation of concrete gravity dam under the action of earthquake.
应用联合有限-离散元法结合弥散式旋转裂缝模型分析了地震作用下混凝土重力坝动力破坏过程。
The simulation results show the validity of employed finite element method and it can provide theoretical instruction for aluminum extrusion die design and technique parameters selection.
模拟结果表明所用有限体积法是有效的，可以为铝型材挤压的模具设计与工艺参数的选择提供理论指导。
Finite element method is used to carry on numerical simulation of fluid-structure interaction for the system of TLD, and a verification of the reliability of fluid-structure coupled mode is made.
尝试用有限元分析的方法模拟TLD中流体与结构的耦合作用，并验证了由此方法建立起来的流固耦合模型的可靠性；
In order to analyze the rules of head width reduction of slab during side pressing, a finite element model was established by method of numerical simulation.
为了分析定宽过程中板坯头部失宽的变化规律，利用数值模拟的方法建立了板坯侧压的有限元模型。
Among the numerical simulation methods, the finite element method (FEM) is widely to solve the electric field with complex structure and multi-dielectric medium with high precision.
在常用数值求解方法中，有限元法以其通用性强，适用于结构复杂、多重介质复杂场域求解，且求解精度高等优点而被广泛用于电器电场的数值求解。
Finite element method is used as numerical simulation means and a program used to calculate saturated unsaturated seepage due to surface infiltration is worked out.
采用有限元方法作为数值模拟手段，编制了考虑地表入渗的饱和非饱和渗流有限元计算程序。
A new method for the treatment of constraints in finite element simulation of metal forming is put forward.
此文提出了适用于金属体积成形过程有限元模拟的约束处理算法。
The simulation method of the rigid-elastic coupling control system is introduced by using the interaction of the finite element analysis software and the control system simulation software.
该文介绍了交互使用有限元分析软件和控制系统仿真软件实现具有刚柔耦合结构复杂系统的仿真方法。
The paper provides the mathematical model of numerical simulation for metal surface hardened by plasma-arc with finite element method.
给出了用有限元方法对金属材料等离子体弧金属表面强化处理过程数值模拟的数学模型。
The paper introduces finite element simulation technology for cover panel stamping forming process, including applied method and software, as well as current status and development trend.
介绍了覆盖件板料冲压成形过程有限元模拟技术的一般方法、常用软件及其最新进展和发展趋势。
It makes use of finite element method to carry out the numerical value simulation by software in reality in order to get the condition of strain and deformation on the main axle installing.
利用有限元法，通过有限元分析软件对其实际工况进行整体结构数值模拟，得出主轴装置在实际工况下的应力、变形情况。
The mathematical models are amended by BP neural network algorithm, and method of finite element numerical simulation is used to compensate the removal data and extend the applied range.
应用BP -神经网络法对数学模型进行修正，建立有限元数值模拟方法补充剔除数据并对数学模型适用范围进行扩展。
The parameters affecting the bulging of the sheet have been studied by finite element numerical simulation method with the law of the parameters affecting the bulging obtained.
本文利用有限元数值模拟方法对影响板料胀形性能的参数进行了研究，并得出了各参数对板料胀形性能影响程度的规律。
With the theory of finite element method, the simulation calculation is conducted for the axial pressure distribution law, the leakage rate and the pressure variation of the seal rings.
利用有限元法理论，对密封圈的压力沿轴向的分布规律、泄漏量与压力变化关系进行了模拟计算。
Transient numerical simulation for Bridgman method was carried out by means of deforming finite element method .
采用变形有限元法对坩埚下降法晶体生长过程进行了瞬态数值模拟。
The finite element numerical simulation method is an effective method in quantitatively forecasting reservoir structural fractures and determining the spatial distribution of fractures.
有限元数值模拟法是对储层构造裂缝进行定量预测并确定其空间分布的一种有效方法。
The simulated ultimate load formula and double-control design method of slender eccentrically compressed reinforced concrete member were proposed by nonlinear finite element simulation analysis.
并通过非线性有限元模拟分析，给出了细长钢筋混凝土压杆的极限承载力表达式以及由此确定的双控设计法。
Based on the reduced scale ring rolling and finite element simulation materials axial transferring pattern was studied and a formability evaluation method was proposed including the shape factor.
摘要研究了大型复杂环件形状因素和轧制速率对成形性能的影响规律。
The failure form of rotary roll cavity die for straight tooth bevel gear was analyzed, and the finite element simulation method was employed to change the processing parameter of rotary roll.
分析齿轮摆辗凹模的失效形式，并且通过改变直齿圆锥齿轮摆辗的工艺参数的有限元模拟，探讨了凹模进给量、摩擦系数和摆头倾角的改变量对凹模应力影响以及对凹模失效形式的影响。
The failure form of rotary roll cavity die for straight tooth bevel gear was analyzed, and the finite element simulation method was employed to change the processing parameter of rotary roll.
分析齿轮摆辗凹模的失效形式，并且通过改变直齿圆锥齿轮摆辗的工艺参数的有限元模拟，探讨了凹模进给量、摩擦系数和摆头倾角的改变量对凹模应力影响以及对凹模失效形式的影响。
应用推荐