By electron diffraction analysis, it is identified that the alloy phase has a face center orthogonal structure and there are some orientation relationship between the Mg ma.
通过电子衍射分析确定出该合金相具有面心正交结构，与镁基体间存在着一定的取向关系。
By electron diffraction analysis, it is identified that the alloy phase has a face center orthogonal structure and there are some orientation relationship between the Mg matrix and the alloy phase.
通过电子衍射分析确定出该合金相具有面心正交结构，与镁基体间存在着一定的取向关系。
The inheritance phenomenon of precipitated V_4C_3 in martensitic transformation has been investigated by means of electron diffraction and matrix analysis.
本文利用电子衍射和矩阵分析方法探讨了析出V_4C_3在马氏体相变中的遗传现象。
The coating composition, microstructure and phases were investigated by energy dispersive X ray analysis (EDXA), X ray diffraction(XRD), scanning electron microscope(SEM)and image analyzer.
运用能谱技术（EDXA）、X射线衍射仪（XRD）、扫描电子显微镜（SEM）和图像分析仪对涂层成分、显微组织、涂层相结构和组成进行了分析。
A new kind of method for studying critical materials-electron backscatter diffraction (EBSD) analysis technology was introduced.
介绍了一种新型的晶体材料研究方法——电子背散射衍射分析技术。
The structure and properties of polymer were investigated by using fr IR, electron diffraction and element analysis.
通过元素分析、红外光谱、电子衍射和接触角测定等研究了聚合物结构与性能。
Simulation and detailed analysis of low energy electron diffraction( LEED) data.
低能量电子绕射（EED）果之模拟及详尽数据分析。
However, compared to X-ray crystallography, electron crystallography confronts with a critical problem, i. e. dynamical diffraction problem which makes structure analysis very complicated.
然而，由于电子与晶体之间强烈的动力学交互作用，使得用电子显微镜方法分析结构复杂化。
In this paper a computer program was described, which is designed for analysis of polycrystalline electron diffraction pattern of a multi-phase system.
本文介绍为分析多相体系的多晶电子衍射图而设计编写的计算机程序。
The principles of X ray diffraction(XRD) and electron backscatter diffraction(EBSD) are introduced, and their applied characteristics described in texture analysis of steel sheet by taking examples.
介绍了X射线衍射（XRD）法和电子背散射衍射（EBSD）法的原理。结合实例阐述了两种方法在钢板织构研究中的应用特点。
Then X ray diffraction (XRD), Scanning Electron Microscopy (SEM) were used to analysis the inside structure of starches with different hydrolysis rates, DSC for the thermal properties analysis;
其次采用X射线衍射（XRD）、扫描电镜（SEM）等分析方法对不同水解率的淀粉微晶进行结构分析，DSC进行热性质分析；
The obtained samples were characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and thermogravimetric analysis (TGA).
所得样品用扫描电镜(SEM)、傅立叶红外光谱(FT - IR)、X射线衍射(XRD)和热重分析(TG)等分析方法进行了表征。
Optical metallographic microscope, micro-hardness tester, electron microprobe and X-ray diffraction analysis were applied to explore the process of intermediate temperature tempering transformation.
利用光学金相显微镜、显微硬度计、电子探针及X射线衍射分析仪初步探索其中温回火转变过程。
Strontium titanate powder prepared is characterized by scanning electron micrograph (SEM) and X-ray diffraction (XRD) and is analyzed by chemical analysis, ICP and IR.
用SEM、XRD分析了钛酸锶粉体的形貌及晶相；并进行了化学分析和ICP测试。
The structure and grain size were established by X-ray diffraction spectroscopy, differential thermal analysis and electron microscope. The application of product was probed also.
用x -射线衍射分析、差热分析、电镜等方法确定了其结构和粒度，并对产品的应用进行了初步探讨。
The prepared powders and the green and sintered hollow-fiber membranes were characterized by thermal analysis, X-ray diffraction, scanning electron microscopy and X-ray energy dispersive spectroscopy.
用热分析、X射线衍射仪、扫描电镜、X射线能谱等技术对制备的粉体、烧结前后的中空纤维膜进行了表征。
Using X-ray diffraction, energy spectrum analysis and scanning electron microscope, TiO2 crystallite, shape and size on ceramic surface are tested.
利用x射线衍射仪、能谱分析和电子扫描电镜对瓷砖釉面表面的二氧化钛晶型、形貌、颗粒大小进行了测试。
Using the infrared spectrum analysis and X-ray diffraction analysis and test method, scanning electron microscope, etc, to rare earth of synthesis of boric acid salt are analyzed and characterized.
采用红外光谱、X射线衍射分析测试方法、扫描电镜等，对所合成的稀土硼酸盐进行了分析和表征。
The morphology and crystallography analysis of lath martensite within a packet in 17CrNiMo6 steel was studied by electron backscattering diffraction(EBSD) with field emission gun.
利用电子背散射衍射（EBSD）技术和TEM分析方法研究了17CrNiMo6钢中一个形态上的packet内的板条马氏体的形态与晶体学特征。
The morphology and crystallography analysis of lath martensite within a packet in 17CrNiMo6 steel was studied by electron backscattering diffraction(EBSD) with field emission gun.
利用电子背散射衍射（EBSD）技术和TEM分析方法研究了17CrNiMo6钢中一个形态上的packet内的板条马氏体的形态与晶体学特征。
应用推荐