From c. 1900, electric discharge lamps were in use in Europe and the U. S.
约从1900年以来，欧洲和美国都在使用着实用的放电灯。 收藏。
Form of visible electric discharge between rain clouds or between a rain cloud and the earth.
闪电，是一种在雨云之间或者雨云与地球之间肉眼可见的放电形式。
Fluorescent, neon, mercury, sodium, and metal-halide lamps are of the electric discharge variety.
放电灯的种类有萤光灯、霓虹灯、水银灯、纳灯、复金属灯等。
Electric discharge characterized by a cathode fall that is small compared with that in a glow discharge.
与辉光放电相比，阴极位降相对较低的放电形式。
Electric discharge characterized by a cathode fall that is small compared with that in a glow discharge.
用二相时钟设计了对寄生电容低灵敏的开关电容单位延时器、负比例器和加法器。
Operators should carry out human electric discharge before starting to work and not allowed to wear metal jewery;
作业人员操作前应进行人体放电，工作时穿工作衣且不许佩带金属物；
The discharge of mercury arc is electric discharge phenomena of low pressure gas and the current density is great.
汞弧光放电是一种低气压气体放电现象，放电电流密度大。
This paper introduces the plug removal principle of this technique and the effect of electric discharge on casing.
介绍了该技术井下放电解堵原理、放电对套管的作用。
The author has made an experimental researches firstly on a new technology called EDC (electric discharge coating).
本文作者在国内率先对液相脉冲放电沉积技术进行了试验研究。
The whole process efficiency has been improved by 20% by the numerical control electric discharge precision machining.
经过初步工艺试验表明，整个加工效率可提高20%。
A new technique of electric discharge (Ed) milling insulating engineering ceramics has been recently developed by the authors.
绝缘工程陶瓷电火花铣削技术是作者开发出的一种新型加工技术。
The exciting phenomenon which elements, chemical compound and electric discharge lamps produce in microwave strong field is reported.
本文报道了元素、化合物和放电灯在微波强场中产生的激发现象。
A blue gaseous allotrope of oxygen, O3, formed naturally from diatomic oxygen by electric discharge or exposure to ultraviolet radiation.
臭氧一种气态氧气的同素异形体，O3在紫外线辐射下通过电子放射或暴晒从双原子氧气自然形成。
Some generate plasmas through electrode-based electric discharge; others use coil-based magnetic induction or antenna-generated radiation.
有些透过电极放电产生电浆，有些则是使用线圈磁感应或天线产生的辐射。
The surface roughness in the wire cut of electric discharge machine work is one of the important parameters to measure the work performance.
电火花线切割加工的表面粗糙度是衡量加工质量的重要指标之一。
This article introduced the matching selection of step motor for wire-cut electric discharge machine by analyzing the special stress of the machine.
通过对电火花线切割机床在加工过程中的特殊受力分析，给出步进电机的匹配选择方法。
If is the co-content battery comparison, the homogeneous instrument electric discharge, the discharge time is higher than the nickel hydrogen absolutely.
本产品为我公司刚研制出的新的产品，同一般的镍氢电池比较。如果是同容量的电池比较，同种仪器放电，放电时间绝对高于镍氢。
The effects of anti epilepsy capsule to abnormal electric discharge of epilepsy were taken from both clinical and experimental studies, which EEG was an indicator.
以脑电图为观察指标，从临床与实验两个角度研究抗痫胶囊对癫痫异常放电的影响。
Electric discharge lamp or vapor lamp: lighting device consisting of a transparent container within which a gas is energized by an applied voltage and made to glow.
放电灯，亦称蒸气灯，一种照明器件，由一透明外壳构成，其中的气体被外加电压激发而发光。
Electric discharge lamp, or vapor lamp: Lighting device consisting of a transparent container within which a gas is energized by an applied voltage and made to glow.
放电灯，亦称蒸气灯，一种照明器件，由一透明外壳构成，其中的气体被外加电压激发而发光。
In this paper, some new points were put forward based on theoretical analysis of the discharge gap of Electric discharge Generating machining based on wire electrode.
针对基于线电极展成加工的放电间隙进行了理论分析，提出了一些新的研究观点。
When electric discharge is conducted, a human body has no acmesthesia, all troubles in the daily living and the work of people are eliminated, and the effect is obvious.
放电时，人体无针刺感，消除了人们在日常生活及工作中所带来的一切麻烦，效果明显。
Uses in the electric conductance monitor solution the density change, determined differently circulates under the sufficient electric discharge condition battery capacity.
采用电导监测溶液中浓度的变化，确定不同循环充放电条件下的电池的容量。
Experimental results show, the ignition and combustion process of propellant can be effectively modulated by controlling the electric discharge behavior of pulsed power supply.
等离子体点火密闭爆发器定容实验研究表明，通过对电能释放规律的控制，能有效调节火药的点火与燃烧过程。
Through the experiments with quickly wire cut of electric discharge machines, this paper analyzes and studied the influence regulation of the discharging current to the surf...
通过在快走丝线切割加工机床上进行多次加工实验，本文研究分析了放电电流对线切割加工表面粗糙度的影响规律。
Through the establishment of the process database, the simulation system is applicable to electric discharge machining in other medium, it is a help to raise the automation of…
通过建立简易工艺数据库 ，该系统可适用于其它介质中的火花放电加工 ，有助于提高电火花气中放电加工自动化程度和开发智能化加工系统。
In electric discharge milling machining (EDMM) process, the rotation of the tool electrode makes tool wear be axial symmetrical distribution, so it is possible to be compensated.
在电火花铣削加工中，由于工具电极作旋转运动，其损耗呈轴对称分布，使工具电极的补偿成为可能。
In electric discharge milling machining (EDMM) process, the rotation of the tool electrode makes tool wear be axial symmetrical distribution, so it is possible to be compensated.
在电火花铣削加工中，由于工具电极作旋转运动，其损耗呈轴对称分布，使工具电极的补偿成为可能。
应用推荐