Elastic finite element analysis shows that theoretical results accord well with test results.
有限元分析结果表明，板在未裂阶段的理论变形与试验观测结果符合很好。
Adopting elastic finite element analysis method to analyze temperature stress in large area concrete beam-slab structure may provide basis for ex.
对此采用一套以弹性有限元分析为基础的方法，对大面积混凝土梁板结构温度应力进行分析，可为超大建筑物的设计提供依据。
Adopting elastic finite element analysis method to analyze temperature stress in large area concrete beam-slab structure may provide basis for extra huge building design.
对此采用一套以弹性有限元分析为基础的方法，对大面积混凝土梁板结构温度应力进行分析，可为超大建筑物的设计提供依据。
Based on elastic FEM theory and heat transfer theory, the author USES I-DEAS software as a CAE tool, builds the finite element analysis method and techniques of the principle shaft system on work.
本文采用I -DEAS软件作为计算机辅助分析的工具，基于弹塑性有限元理论和传热学理论，建立了工作状态下主轴系统的有限元分析方法及技术处理方法。
It is effective to use finite element method in monolithic analysis of an elastic foundation with the frame on it.
用有限单元法对弹性地基和上部框架进行整体分析，是一种有效的办法。
Formulas for friction measurement using elastic cantilever are derived, and the cross section of cantilever is determined using FEA (finite element analysis) software.
推导了弹性悬臂梁测量摩擦力的公式，并用有限元软件分析了弹性悬臂梁的变形，确定了合适的截面形状。
The fail safety of large integrally stiffened panel is investigated based on the linear elastic fracture mechanics and finite element analysis.
用有限元和断裂力学方法分析大型整体机翼下壁板的破损安全特性。
This paper presents a effective method dealing with step elastic supports in structural finite element analysis by inducing elastic support stiffness and structural displacement support matrices.
本文通过引入弹性约束刚度矩阵和结构位移约束列阵，提出了结构有限元分析中处理阶跃型弹性约束的一种有效方法。
A general practical finite element analysis model for two-dimentional elastic large deformation contact problems was established using the TL method.
用TL法分析研究，建立了二维弹性大变形接触问题的一般实用有限元分析模型。
The parametric variational principle may be used to finite element analysis as in plastic limit analysis and in elastic contact problems.
如同弹性接触问题及极限分析中那样，该原理可望用于有限元数值分析中。
Based on the theory of elastic-plastic deformation, according to the finite element method, this paper presents a nonlinear analysis of the distribution of the soil pressure of the ditch conduit.
表明对大型沟埋式管道的上压力，采用弹塑性理论的非线性分析是比较符合实际的，其结果可供设计参考。
In this paper, facing the convergent problem of plastic forming using large incremental step, we deduced the iterative formula used in analysis of elastic-plastic plate forming finite element method.
此文针对塑性成形有限元分析大增量加载的收敛性困难，推导了用于板料成形弹塑性有限元分析的牛顿一致迭代公式。
An implicit integration elastic stiffness method has been developed for the finite element analysis of rock and soil elastoplastic models.
本文提出了用于岩土弹塑性有限元分析的隐式积分弹性刚度算法。
The simulation method of the rigid-elastic coupling control system is introduced by using the interaction of the finite element analysis software and the control system simulation software.
该文介绍了交互使用有限元分析软件和控制系统仿真软件实现具有刚柔耦合结构复杂系统的仿真方法。
According to the deformation of elastic-plastic theory, the finite element analysis model of metal diaphragm for tank of propulsion system in satellite was established in this paper.
根据弹塑性有限变形理论，用有限元法建立了卫星推进系统贮箱金属膜片变形的有限元分析模型。
In this paper the finite element analysis is applied to simulate the elastic-plastic numerical value for the high-pressure full wrapped composite pressure-vessel.
本文针对高压全缠绕复合材料压力容器，应用有限元分析系统对其应力偏大的筒身应力进行了弹塑性非线性数值模拟。
Besides that, on the basis of studying the elastic and plastic finite element method and mechanics knowledge, the paper analyze a steel continuous beam by the large analysis software ANSYS.
另外在研究弹塑性有限元法和力学知识基础上，利用大型有限元分析软件ANSYS对连续钢梁进行弹塑性分析，使塑性设计法的理论依据得以验证，并使认识更为直观。
This paper presents the elastic plastic analysis results of mono strand anchor head by the finite element method.
本文采用有限元方法给出了单孔锚具的弹塑性分析结果，分析了摩擦系数对锚具性能的影响。
Based on the theories of thermo-optical effect and elastic-optical effect, the refractive index field of the dome was numerically computed with the result of the finite element analysis.
利用有限元分析结果，根据热光效应和弹光效应理论，对气动热环境下红外光学头罩的折射率场进行数值计算。
The analysis model, including process chain, geometry of the die, the elastic-plastic finite-element is built according to the practical process.
从挤压成形齿轮的制造工艺链出发，建立了精确模拟分析的工艺过程模型、几何模型、弹塑性有限元模型。
In numerical analysis, the stress distribution and the effects of the parameters in elastic stage are obtained by the finite element program of 20-node 3-dimensional solid element.
电算采用三维实体单元，对弹性状态下这种柱的受力特点和变参数影响进行了分析。
Based on the finite element displacement method, a finite element method on the analysis of mechanical behaviour of plane elastic materials is proposed in this paper.
本文提出了基于有限元位移法，有限元法分析平面弹性材料的力学行为。
Based on the finite element analysis the outrigger, this paper presents an elastic plastic dynamic analysis to system by using the combined Member story model.
对结构采用精细的弹塑性模型进行动力弹塑性分析，梁柱单元用塑性区模型，剪力墙用带分布钢筋的壳元+混凝土弹塑性损伤模型。
Nonlinear finite element program of stayed cable based on the elastic catenary element is programmed. The analytic analysis and finite element analysis of different stayed cables are compared.
编制了基于弹性悬链线单元的斜拉索的非线性有限元分析程序，比较了斜拉索的悬链线解析解、抛物线解析解和基于弹性悬链线单元的有限元解的计算结果。
This paper presents a method for estimating the elastic-plastic dynamic J integral value by finite element analysis.
本文介绍用有限元估算弹塑性动态j积分值的方法。
Then the finite element analysis is carried out, the elastic deformation and stress of the SCMW is studied by using of ANSYS, and the corresponding formula deduced above is proved.
采用了有限元软件ANSYS对钩杆进行了变形与应力分析，从而验证了第二章和第三章推导的相应公式的正确性。
This paper carried out an elastic - plastic finite element analysis on the petal basket - like screw cap used in many pipe support - hang systems.
对电厂管道支吊架系统中的花蓝螺丝进行了弹塑性有限元分析。
A 3-d static and dynamic linear elastic and nonlinear finite element analysis is made on Guandi Gravity Dam.
对官地混凝土重力坝进行了三维静动力线弹性和非线性有限元分析。
The proposed criterion is used to evaluate plastic loads in pressure vessel design by analysis using elastic-plastic finite element analysis to guard gross plastic deformation of pressure vessel.
通过接触单元来数值模拟啮合齿的接触过程，建立了基于整体有限元分析的齿啮式快开压力容器塑性载荷计算方法。
This paper briefly introduces some finite element modes adopted and calculated main points, and presents static and dynamic results of elastic analysis as well.
本文简述分析所用的有限元模型及计算要点，并给出弹性分析所得的静力和动力分析结果。
应用推荐