A signal processor (108) operably coupled to the analogue to digital converter (370) processes the digital received signal.
可操作的连接到模拟到数字转换器(370)的信号处理器(108)处理数字接收信号。
Often, the required output signal is another analog output signal, which requires a digital to analog converter.
通常，要求的输出信号为另一个模拟输出信号，这就需要数模转换器。
"Full scale" refers to the converter could reach the "digital overload" maximum before the encoding analog signal levels.
“满刻度”是指转换器可能达到“数字过载”之前的最大可编码模拟信号电平。
An ACEG experiment platform based on dual PWM converter is established by using high-speed digital signal processor TMS320F2812 and the system performance is assessed through the experiment.
采用高速数字信号处理器TMS320F 2812设计实现了双pwm变换器励磁的交流励磁发电机励磁系统实验平台。
Analog music is converted to a digital signal via an analog-to-digital converter.
模拟音乐通过模拟数码转换器转换为数码信号。
Signal collection handling modular collection AE signal, optimizing it, the AD Converter changing AE signal to the digital signal.
信号采集处理模块采集声发射信号，对其进行调理、AD转换成计算机可以处理的数字信号。
This thesis mainly focused on the principle, design and application of the digital signal processing which was based on oversampling converter.
本文主要研究过抽样转换及其数字信号处理的原理，设计和应用。
The temperature and pressure sensor gathered on-the-spot temperature and pressure signal, and A/D converter converted analog signals into digital signals to revise the on-the-spot flow of natural gas;
温度和压力传感器采集现场温度、压力信号并经A/D转换器转换成数字量用于对现场天然气流量进行温度、压力修正；
In this paper, the features of high speed digital-to-analog converter ADS803, pins and working way are introduced, and the interface design with digital signal processor TMS320LF2407 is given.
本文介绍了高速模数转换器ads803的性能、引脚和工作方式，并给出了它与数字信号处理器TMS320 LF 2407的接口设计方案。
One of the important conceptions of Software Radio is to make A/D converter close to antenna, we should convert IF analog signal even RF analog signal into digital signal.
软件无线屯的设计思想之一是将A／D转换器尽可能靠近天线，即把A／D从基带移到中频甚至射频，把接收到的模拟信号尽早数字化。
We receive our TV signal through a roof top antenna with a digital converter box.
我们通过与数字转换盒的屋顶天线接收电视信号。
For example, an input sensor may be feeding an accurate analog reading to a signal converter, but a faulty signal converter may be sending the CPU an inappropriate digital signal.
例如，输入传感器向信号转换器输入一个正确的模拟信号，但是错误的信号转换可能向CPU输入错误的数字信号。
Since the signal which is disposed by the SCM usually is the Digital Signals, before the Analog signals are checked by the processor, they must be conversed by the A/D converter.
由于单片机所处理的信号是数字信号，对模拟电压信号进行检测处理时首先要用A／D转换器件对其进行A／D转换，然后再进行处理。
Digital to analog converter (DAC) can convert a discrete binary signal into an analog signal directly proportional to the value of the binary signal.
数模转换器(DAC)将离散的二进制数字信号转换成与该数字信号成正比的模拟信号。
At the same time, in order to meet the need of fast measurement, pipeline analog-to-digital converter ADS800 is selected to convert analog signal of pressure.
同时，为了实现系统测量快速性的需要，选用流水线型模数转换器ads800进行压力模拟信号的数字化转换。
Then, a solution based on Digital Up Converter(DUC) was proposed, which implemented the conversion of a complex digital baseband signal to a real passband signal.
然后采用正交数字上变频（DUC）技术进行基带信号数字域调制和频率变换。
A method of implementing digital lock in amplifier with DSP (digital signal processor) and sampling ADC (analog digital converter) is discussed.
探讨了用DSP(数字信号处理器)和采样adc(模数转换器)实现数字锁定放大器的一种方法。
A digital-to-analog converter (DAC) for converting a digital signal to an analog signal includes a first thermometer decoder and a second thermometer decoder.
一种用于将数字信号转换为模拟信号的数模转换器(DAC)，包括第一温度计解码器和第二温度计解码器。
An AD (analog-digital) converter, a signal conditioning circuit and an environment noise sensor can also be arranged so as to monitor directly.
还可设置AD转换器、信号调理电路和环境噪声传感器，以便直接监测。
In the signal into the A / D converter analog to digital conversion, the final processing of data into the microcontroller, then the output is displayed, and determine whether there is a gas leak.
在把信号送入A/D转换器进行模数转换后，将最后的数据送入单片机进行处理，随后输出显示，并且判断是否有煤气泄漏。
A clock or a strobe signal is used to synchronise operation of the comparator, the up-down counter 102 and the digital to analog converter 100 so as to avoid these components racing.
时钟或者选通信号用于比较器、递增-递减计数器102和数模转换器100的同步操作，以便避免这些部件竞争。
It is thus possible to provide an improved analog to digital converter having an improved signal to noise ratio whilst substantially maintaining conversion throughput.
因此，有可能提供一种改善的模数转换器，其具有改善的信噪比，同时基本上保持转换吞吐量。
After the sequence passes through digital-to-analog converter and low pass filter, the desired frequency sweep signal is synthesized by the method of direct digital synthesis.
该序列通过数-模转换器和低通滤波器后，产生出频率扫描信号。
However, extending the upper frequency of such function signal generator is limited by the read-out time of the memory and the conversion rate of the digital-to-analog converter.
可是，这种信号发生器的上限频率的提高受存储器的读取时间和数模转换器的转换速度的限制。为了提高数字法函数信号发生器的上限频率，我们提出了用分布存储式数字法生成函数信号。
An output clock signal is universally suitable for the application of the multi-channel multi-phase clock, and is particularly suitable for a parallel alternate type analog-to-digital converter.
输出的时钟信号普适于多通道多相 位时钟应用，尤其适用于并行交替型模数转换器。
An output clock signal is universally suitable for the application of the multi-channel multi-phase clock, and is particularly suitable for a parallel alternate type analog-to-digital converter.
输出的时钟信号普适于多通道多相 位时钟应用，尤其适用于并行交替型模数转换器。
应用推荐