The article mainly introduces the composition, design method, research process, parameter verification of coaxial, waveguide S-parameter standard devices.
主要介绍同轴、波导s参数标准件的组成、设计方法、研制过程及参数定标的方法。
So the actual need for the S-VI and E-VL and the design and realization method are the research background in this paper.
对于此类S-VI和E-VL的实际需要及其设计与实现方法,正是本课题的研究背景。
In this paper, T-S fuzzy controller is applied to the single inverted pendulum system, which illustrate effectiveness of the stability design method.
同时给出t - S模糊控制器应用于单倒立摆系统的一个实例,并用文中的稳定性分析方法分析它的系统稳定性。
Design and realize a medical image processing system which accords with the clinical image department 's procedure, realize the image enhancement method and applies to clinic.
设计并实现一个符合影像科室流程的医学影像处理系统,实现影像增强方法并应用于临床。
A design method based on multiplexing execution-cycle and interrupt flag signals using register model is proposed. S.
提出了中断执行周州复川、寄存器模型设计中断标识信号的中断电路实现方法。
An inverted pendulum example of non-fragile controller design of uncertainty T-S fuzzy systems shows the feasibility and the effectiveness of the method.
通过对一级倒立摆的不确定模糊非脆弱控制器设计的实例,表明了设计方法的可行性和有效性。
In this paper, we would use fuzzy maths′s principle in large system decision theory and method, design corresponding, mutiuse and intelligent system IDSS.
本文研究了模糊数学原理应用于大系统决策的理论和方法,设计了相应的多用途智能人工化决策知识系统IDSS。
An LMI design method for mean square stabilization of a class of nonlinear stochastic systems based on the T-S fuzzy model is proposed.
提出一类基于T S模糊模型的非线性随机系统均方镇定的线性矩阵不等式(LMI)设计方法。
LMI design method for mean square stabilization of a class of nonlinear stochastic systems with time-delay based on the T-S fuzzy model is introduced.
提出了一类基于T - S模糊模型的非线性时滞随机系统均方镇定的LMI通用设计方法。
This paper has discussed "a small assistant" 's design method and skill in multimedia software from three respects such as element design, dynamic result design and sport orbit design, etc.
本文从图像元素设计、动态效果设计、运动轨迹设计三个方面,讨论了多媒体软件中“小助手”的设计方法和技巧。
The article introduces the method for design the Real - time Control System of the efficiently intelligence dress machine, it 's consisted of software design and hardware circuit design.
本文详细地介绍了包衣机实时控制系统设计的方法,包含软件设计和硬件电气线路的设计。
The optimum fiber proportion of Masson' s pine thermomechanical pulp reinforced polypropylene composite could be determined accurately by optimum design method of main composition analysis.
用多元统计分析中的主要成分分析法优化设计马尾松热磨机械浆增加聚丙烯复合材料,合理地确定多项性能兼优的最佳纤维含量。
The emphasis is placed on the design of the fuzzy controller, the method of determining system′s gain parameter and the method of realizing BP neural network.
重点研究了模糊控制器的设计、系统增益参数的确定方法和BP神经网络的实现方法。
The results of the design verification, including identification of the design, method(s), the date, and the individual(s) performing the verification, shall be documented in the DHF.
设计验证的结果应当记录在设计历史文档中。这些结果包括设计识别、方法学、日期和实施审核的人员。
Based on the design method of S. I. Karsay gating and risering and practical experience, Usering FOXBASE program software used to design riserless or small riser system was developed.
本文运用卡赛浇冒口设计方法,结合生产经验,采用FOXBASE程序软件,开发了铸件无冒口或小冒口工艺设计程序。
Simply introduce the structure and theory of TI, s 2000 series DSP. Design the method of PWM waves in 3-phase Brushless DC Motor.
使用TI公司的2000系列DSP芯片,并简单介绍了芯片的结构和原理,设计了应用于三相无刷直流电机的PW M波形产生方法。
The structured design method is adopted in programming the relevant software of this dissertation, whose architecture is C/S mode.
这套系统采用结构化系统的分析方法,体系结构为C/S模式。
A new design scheme of adaptive fuzzy controller is proposed based on the model reference adaptive fuzzy control (MRAFC) and Lyapunov s second method.
基于模型参考自适应模糊控制和李亚普诺夫第二方法,提出了一种自适应模糊控制器设计的新方案。
Cable force is important in cable-stayed bridge 's design and construction. The method of measuring frequency of its own to estimate cable force is widely used in bridge engineering.
索力是斜拉桥设计和施工的重要依据,根据测得的固有频率估算索力的频率法在桥梁工程中广泛应用。
The converse perspective drawing is a prime design method of using new product 's photo-view to get the outline in the reversal imitating design of photo-view.
在影像反求设计中,透视图反求作图方法是由新产品的照片求解其立体外形的主要设计方法。
This paper presents the reliability design method for Audi 100 car 's rear coil spring.
本文介绍了奥迪100轿车后螺旋弹簧的可靠性设计方法。
The combination of a N-S equation flow solver with a nonlinear optimization method is used to design a new airfoil with high ratio of lift over drag.
使用解析形状函数法和参数化翼型表示方法,将求解绕翼型流场的N S方程解与优化方法相结合,可设计出新的高升阻比翼型。
The design level and quality were greatly improved to meet international level with this method by practice. It paved the way for TDC1030's successful development.
实践证明,应用该方法后磁路的设计水平和设计质量获得了很大的提高,达到了国际先进水平,保证了TDC1030型高效磁选机的成功研制。
The method can capture the single connected component in image and extract it"s feature. According to the feature, the method of categories to recognize entire single connected components is design."
这种方法可捕获图像中所有单连通域,并能准确地提取其特征量,然后依据所提取的特征量设计分类器,实现对图像中所有单连通域进行分类识别并加以跟踪的目的。
The deploy method and rule, which have better dynamic performance, were proposed through compare and contrast between different deploy methods and rules for antenna 's further design.
在对不同展开方式和规律比较的基础上,提出了具有较好动力学性能的天线展开方式和规律,为大型可展天线的设计研制提供了参考依据。
Relative to other signa1's magnitude extraction circuit, this design method has such features:distinct design thought, simple circuit structure, low cost, high reliability and so on.
实验结果证明,相对其它幅值提取电路,该设计方案具有设计思路清晰、电路结构简单、成本低和可靠性高等特点。
Hsin, C. Y. , S. K. Chou, W. C. Chen, 2002, A New Propeller Design Method for the POD Propulsion System, 24th Symposium on Naval Hydrodynamics, Fukuoka, Japan.
辛敬业,林博仁,李志义,庄侨新,2002,荚式推进器与传统推进器流场分析,第十四届中国造船暨轮机工程论文研讨会论文集,基隆。
Hsin, C. Y. , S. K. Chou, W. C. Chen, 2002, A New Propeller Design Method for the POD Propulsion System, 24th Symposium on Naval Hydrodynamics, Fukuoka, Japan.
辛敬业,林博仁,李志义,庄侨新,2002,荚式推进器与传统推进器流场分析,第十四届中国造船暨轮机工程论文研讨会论文集,基隆。
应用推荐