Design the signal adjust circuit for sensor, and the power amplification circuit for the hydraulic pressure system of test platform and the controller of magnetorheological dampers.
设计出传感器输入输出信号调理电路和试验台架液压激振系统、磁流变阻尼器控制器的功率放大电路。
The paper details the USES of phase detection discriminator in radar receiver, describes the theoretical analysis and circuit design, and gives out the practical circuit and test requirements.
详细分析雷达接收机中鉴频器的作用，进行理论分析和电路设计，并给出具体电路和调试要领。
Facing the challenge of design scale of VLSI becoming larger, except for circuit parallel, the existing basic parallel approaches cannot solve test generation complexity problems radically.
面对VLSI设计规模日益增大的挑战，除了电路并行以外，其它已有的基本并行策略都无法从根本上解决测试生成的复杂性问题。
According to the structure of hydraulic steering boosters and the work principle of steering system, design of the test circuit and test principle for a steering booster are introduced in the article.
根据液压转向助力器的结构和转向系统的工作原理，介绍了一种转向助力器检测回路的设计和测试原理。
After that the paper introduces the design theory, practical circuit and test technique for test circuits of the bench.
然后讲解测试台的测试电路设计理论、实际电路设计和测试方法。
This paper introduces a design of machine in small range tension test which is applied to a field of micro-electronics integrate circuit, by analyzing tasting method and sensor theory.
通过对张力测试的分析及传感器的原理分析，介绍一种应用于测试微电子集成电路丝线张力的小量程张力测试机构的设计。
This paper describes the main function, technology and test of L82C37A programmable DMA controller. It also shortly introduces basic circuit and design method.
叙述了L82C37A可编程DMA控制器的主要功能、制造工艺和测试，并对其基本电路及设计方法进行了简要介绍。
The simulation and test results show that the hybrid method of Graphic and CAD is able to design circuit efficiently and easily, save development time and enhance design efficiency.
仿真结果和测试结果表明，利用图解和CAD相结合的方法能够方便、有效地进行电路设计，提高设计效率。
We designed the hardware of test system in the paper, analyzed the principle of each parts of hardware and the design of microcomputer interface circuit.
论文进行了检测系统的实际硬件设计，具体分析了硬件系统中各组成部分的工作原理及实际微机接口电路的设计过程。
It detailedly describes the principle of the liquid level test and circuit processing, a frame drawing of the overall circuit design and software flow.
文中详细论述了液位信息检测、电路处理的原理，给出了整体电路设计框图和软件流程。
The rationality of the circuit design is validated by a group of practical test data.
用一组实测数据验证电路设计的合理性。
The basic principle, structure design and calculation of magnetic circuit for touchless magnetoelectric rotational velocity sensor are reported. The test data and testing result are also analyzed.
介绍了非接触磁电式转速传感器的基本原理、结构设计及磁路计算，给出了试验数据，并对测试结果进行了分析。
The design of timing circuit test system realized the test automation of timing circuit in fuse and HPG chip, reduced the test time, raised the test accurence.
时序电路专用测试系统的研制实现了HPG模块和引信本体中时序电路测试的自动化，缩短了测试的时间，提高了测试的准确性。
This paper introduces the intelligent degree of wave display circuit design in measurement device of engine test instruments.
本文介绍了发动机检测仪检定装置的示波灵敏度电路设计。
As the integrated circuit design has stepped into the deep ultra-submicron stage, the complexity of the circuit increases continually, chip test faces very huge challenge.
随着集成电路设计进入超深亚微米阶段，电路复杂度不断提高，芯片测试面临着巨大的挑战。
This design will be through a multi-output DC power supply regulator circuit is designed to explain the principle and regulator of the power indicator and test methods.
本设计将通过多路输出直流稳压电源是设计说明稳压电路的工作原理和稳压的电源的指标及其测试方式。
In this paper, it is proposed that the circuit design, test method and the typical application of a kind of power noise filter.
文中介绍电源噪声滤波器的电路设计、测试方法及典型应用。
This paper introduces the circuit design principle, component selection, installment, testing and application of a two-way impedance electric chemical test pre-placed magnifier.
介绍了一种双路高阻抗电化学测试前置放大器的电路设计原理、元件选择、安装调试及其应用。
The test results show that the AGC circuit is well and achieve the require of system design.
试验结果表明，该电路工作稳定，效果良好，达到了系统设计要求。
Moreover, the design of interface circuit between McBSP and MAX3140 and communication test software based on RS-485 communication protocol are presented.
给出了接口的硬件电路和基于RS- 485通信协议的通信测试软件设计。
Giant magneto-impedance effect, the characteristic of amorphous materials, circuit design and capability test of sensor are introduced in this paper.
介绍了巨磁阻抗效应，非晶材料特性，传感器的电路设计和传感器性能测试。
The principle and method of design of a digital TRMS electrical parameter test instrumentation by use of high performance CS5460A were introduced, its circuit was also partially given.
介绍用高性能CS5460A设计数字真有效值电参数测试仪的原理、方法，给出了部分电路。
It introduces the interface circuit design of CAN, Procedure of initializing of SJA1000 CAN controller and the design of hydraulic pressure colligation test-bed.
文中介绍了CAN接口电路设计s、JA1000 CAN控制器的初始化流程和液压综合试验台控制系统的设计。
This thesis introduces the design of high performance analog test interface of BDS circuit board test system. It emphasizes the design theory, hardware architecture and anti-jamming measure.
本文介绍了一种应用于电路板测试系统高性能模拟测试接口的研制。重点阐述它的设计思想、硬件结构以及抗干扰措施。
As a standard technique of test and Design-For-Testability for testing the digital printed circuit board, Boundary-Scan technique has obtained widespread application in electronic equipment.
边界扫描技术是一种标准的数字电路测试及可测试性设计方法，它在工业界得到了广泛的应用。
The circuit design of this AACI is explained; and detailed test results are given. Finally a rough evaluation of the AACI is presented.
本文阐述了这种积分器的电路设计，给出了较为详细的实验测试结果，并对积分器进行了评价。
The digital logic chip of the invention and the method of design for testing can realize the observation of circuit scanning test by adopting few pins.
本发明的数字逻辑芯片及其可测试设计的方法，能够通过少量管脚实现电路在扫描测试时的可观测。
The design and implementation of fuse timing circuit test system with military color was introduced which used to test the performance and timing of HPG chip and fuse.
本文以国家某重点型号工程为背景，进行了引信时序电路专用测试系统的设计和实现。
The design and implementation of fuse timing circuit test system with military color was introduced which used to test the performance and timing of HPG chip and fuse.
本文以国家某重点型号工程为背景，进行了引信时序电路专用测试系统的设计和实现。
应用推荐