This paper introduces design of structure and property of function, gives design of function.
阐述了智能化门禁系统的结构设计、功能特性，并给出了系统的功能设计及部分应用。
Curriculum design refers to the substantive structure, the property of basic curricula elements, and the organizational form or arrangement of these elements.
课程设计指课程的实质性结构、课程基本要素的性质，以及这些要素组织形式或安排。
Dynamic response analysis of tensioned cable and membrane structure is one of difficulties of structure design because of its tensioned-only, large deformation and small strain property.
由于膜材只能受拉不能受压以及大变形小应变的特点，其设计中动力响应分析是难点之一。
Discusses structure-property relationships in metallic alloys selected to illustrate some basic concepts of physical metallurgy and alloy design.
讨论选用以阐明物理冶金与合金设计基本概念的金属合金当中的性质结构关系。
The design ideads, structure characteristics, compounds and property index of special miller used for dual horizontal aluminum guide rod were described.
介绍了双卧式铝导杆专用铣床的设计构思、结构特点和各部分组成及各项性能指标。
As base course material, porous concrete withstands the repeated action of traffic and temperature, so the fatigue property should be considered in structure design.
多孔混凝土作为路面的基层，和面层一起受到车辆荷载和温度的反复作用，结构设计中需考虑其疲劳性能。
The technical property requirements and structure design scheme of such joints were proposed.
提出了该联接夹座的技术性能要求和结构设计方案。
The task of hydraulic turbine type design, is to decide the main property parameter and the structure control parameter, to finish the design of the pipeline of hydraulic turbine.
水轮机选型设计的任务是确定水轮机的主要性能参数和结构控制参数，完成水轮机的流道设计。
The Structure of Lining vane and safety board for slurry pump, compound property, formula, production technology, mold design, practical use and advantages are introduced in present paper.
简介泥浆泵衬胶叶轮和护板的结构，胶料性能、配方、生产工艺、模具设计、实际使用状况、优点等。
Structure-property relationship was the focal point in the design and synthesis of high efficient two-photon polymerization (TPP) sensitizers.
在双光子聚合敏化染料的设计合成中，结构与性质的关系一直是研究的重点。
With different process principle, given the structure property and key design point of die mold of the head.
结合不同工艺原理，分析指出了机头口模的结构特点和设计要点。
As base course material, porous concrete withstands the repeated actions of traffic and temperature, so the fatigue property should be considered in structure design.
多孔混凝土作为沥青混凝土路面的基层时，和面层一起受到车辆荷载和温度的反复作用，结构设计中需考虑其疲劳性能。
As a result, the study and analysis of the structure of tower belt crane can redound to the design of tower-belt, which has own knowledge property right.
因此，对塔带机的结构进行研究和分析，可以为发具有自主知识产权的布料机提供基础。
The structure design and molding technique of GRP flange are studied according to GRP property and combined with the practical experience.
根据玻璃纤维增强塑料的性能特点，结合实践经验，探讨了玻璃纤维增强塑料法兰的结构设计及成型工艺。
Through the analysis of the structure and technological property of the of the doorknob, the mould structure, the working process of the mould, the design of the key part of the mould are introduced.
通过对门体堵盖的结构和工艺性分析，介绍了该模具的结构设计、工作过程及关键零部件的设计。
The technological property and the stamping technology of the electrical appliance touch support were analyzed. Layout scheme, die structure, the key parts design were introduced.
分析了电器触动支架零件的结构工艺性和冲压工艺，介绍了零件的排样方案、模具的总体结构、主要零部件的设计。
The article introduces its structure, property, feature and analyzes the design method of it and SPI. The present application note describes an example of controlling a 4-bit LED using SPI.
介绍了该芯片的结构、性能、特点，并分析了它与外围器件的SPI接口设计方法，给出了用SPI接口控制4位显示器的实例。
The technological property and the stamping technology of the electrical appliance movable support were analyzed. Layout scheme and total structure of die, design of the key parts were introduced.
分析了电器活动支架零件的结构工艺性和冲压工艺，介绍了零件的排样方案、模具的总体结构、主要零部件的设计。
Based on the analysis of the structure and technological property of the surface lid, the main points of the design and the working process of the injection mould for the surface lid were introduced.
通过对影视盒面盖的结构及工艺分析，介绍了面盖注射成型模具的设计要点及模具的工作过程。
The knowledge of manufacturability contains technological property of structure, standardization of design and constrains of enterprise production resource etc.
可制造性知识包含结构工艺性、设计标准化以及企业生产资源约束等，其内容具有复杂性和不确定性的特点。
Therefore, the difference of fatigue property among different regions on a DS turbine blade should be considered in blade structure design and fatigue life prediction.
这说明叶片不同部位的材料疲劳性能差异明显，在定向凝固涡轮叶片的结构、寿命设计中，需要考虑这种差异。
The utility model improves on the basis of the previous design of single-cylinder compressor and still preserves the previous operation principle and property and the compact structure.
本实用新型在原设计的单缸压缩机基础上改进的，它仍保持原有的工作原理及特性，结构紧凑。
The utility model improves on the basis of the previous design of single-cylinder compressor and still preserves the previous operation principle and property and the compact structure.
本实用新型在原设计的单缸压缩机基础上改进的，它仍保持原有的工作原理及特性，结构紧凑。
应用推荐