The systems design stage focuses on three major products or deliverables: user interface methods and products, database structures, and processing and control procedures.
该系统的设计阶段侧重于以下三个主要产品或交付：用户界面的方法和产品，数据库结构，并处理和控制程序。
This paper introduces PC control approach of joint motion of manipulator. This approach includes driving of stepping motor, interface design of hardware circuit and software programming.
介绍一种机械手关节运动的PC机控制方法，它包括步进电机的驱动、硬件接口电路的设计、软件的编程方法。
At last the mainly introduction is the using of LCD in combination with 80c196kc in single chip control system, including hardware interface and software design.
最后，主要介绍了液晶显示器在单片机控制系统中与80c 196kc的结合使用，其中包括硬件接口以及软件设计。
In system each interface logic control and image preprocess are implemented by FPGA, so the design of FPGA's internal logic and algorithms realization in FPGA is the focus of this article.
系统中fpga实现各种外围逻辑控制和图像预处理算法，FPGA的内部逻辑设计和算法实现是本文讨论的重点。
The data communication through computer's serial interface is often involved in the design of distributing control system.
在集散控制系统设计中，经常会涉及到利用计算机串行接口进行数据通信。
Interface circuit and the design of control program in asynchronous transfer mode between AT89C51 single chip microcomputer system and intelligent MODEM are introduced.
介绍AT 89 C51单片机系统与智能调制解调器MODEM之间的接口电路和异步传输方式下的控制程序设计。
At last the main introduction is the using of LCD in combination with 80c196kc in single chip computer control system, including hardware interface and software design.
最后，主要介绍了液晶显示器在单片机控制系统中与80c 196kc的结合使用，其中包括硬件接口以及软件设计。
Through applying reliability technology, completed the hardware & software scheme of match board control system and the design of part of interface and protection circuitry.
应用可靠性技术，完成了匹配台控制系统硬件软件总体设计、部分接口与保护电路设计。
The design and implement of the bi interface selective control plan in LPG absorber is introduced.
重点介绍液化气吸收塔双界面选择性控制方案设计与实施过程。
This Paper introduces the interface design between 80c196kb and the memory storing configuration function parameters for a steam boiler control system.
本文介绍了某造汽锅炉控制系统中的组态功能参数存储器与80c196 KB接口的设计。
The batch controller also has a standard interface of RS-485 bus, preferably achieved the network design of the batch control system.
该配料控制器还配有标准的RS—485总线接口，较好地实现了配料控制系统的网络化设计。
The serial communication interface has many merits such as simple design hardware, more convenient control, lower cost, far transmit distance and etc.
串行通信接口技术以其硬件设计简单、控制方便、成本低廉、传输距离远等优点在工程中广泛使用。
The design of hardware interface circuits, setting of control parameters, some critical control code, and the flowchart of AD sampling program etc. are described in this paper.
主要包括硬件接口电路的设计、控制参数的设置以及部分关键的控制代码和实现AD采样的程序流程等。
The control unit interface of nc machine tool is an important part for man-machine conversation whose design quality directly effects the study and working efficiency of users.
数控机床控制单元界面是人机交互的主要部位，其设计质量直接影响用户的学习和使用效率。
The hardware and software of the Intelligent Temperature Control Meter and the design of relevant interface circuit are described in this paper.
本文详细地阐述了智能温度控制仪的硬件组成、软件设计及相关接口电路。
The functional design of each unit allows it to be equipped with a control panel using a programmable logic controller with an operator interface for a highly user-friendly operation.
每个单元功能设计成允许装配一个由逻辑程序控制器控制的拥有高度友好用户界面的控制面板。
This design categorized all equipments which were used in the system, and similar devices we-re designed for the same interface control procedures, such treatment is conducive to reunification.
本设计将涉及的设备进行分门别类，并针对同类的设备设计相同的接口控制程序，这样有利于统一处理。
The mechanical design, sensors system design, DC Servo control system design and data acquisition system design of the man-computer stiffness display interface device are introduced.
介绍了该人机触觉再现接口装置的机械设计、传感器系统、直流伺服控制系统以及数据采集系统的设计。
The method to implement data buffer and logical control of the data transfer through FPGA was introduced, and the design of the interface between FPGA and AD9240 was also shown up.
对如何用FPGA实现该数据采集系统的数据缓存和数据传输的逻辑控制，以及FPGA与AD9240的接口设计等给出了详细说明。
Two design methods of fuzzy logic controller are introduced. One is graphics user interface whose control rules is certain, the other is command lines whose control rules uncertain.
介绍了两种模糊控制器的设计方法，一种是模糊控制规则固定的用户图形界面方法，另一种是模糊控制规则可调的命令行方法。
Systems are engineered to interface with our customer's design and control schemes.
系统按照客户的设计和控制方案进行设计。
The design of medical infusion pumping system is divided into three parts: 1. Liquid drop measurement. 2. System interface. 3. Electromotor control.
系统设计分为三大部分：1．液滴检测模块2．系统接口模块3．电机控制模块。
Then, the design of the main control interface is performed based on the analysis by IDEFO.
根据上位机的IDEFO分析进行了主要控制界面的设计；
With regards to the hardware design, a DSP chip TMS320F206 is adopted as CPU, and builds a hardware platform of sample, control, communication and human interface.
硬件设计方面采用DSP芯片TMS320F206为核心处理器，建立起基本的采样、控制、通信和人机接口硬件平台。
The following contents are included: the overall design of remote monitor module, the design of reconfigurable remote monitor interface and the safety control hierarchical of remote monitor.
内容包括：远程监控模块的整体设计、可重构的远程监控界面设计、远程监控的安全控制层次。
The emphasis is about the design of interface module used to access and control the hardware.
重点讨论了访问、控制硬件接口模块的设计。
It sets the layout, control output in one, unique design, friendly interface, simple operation, extremely easy to use user in the actual production work.
它集图形排版、控制输出于一体，设计独特，界面友好，操作简单，用户在实际生产工作中使用极其方便。
The paper describes briefly the composition and function of the silicon rectifier control system as well as the program for achieving control functions and design of man-machine interface.
简要介绍了硅整流控制系统的组成、功能，实现控制功能的程序和人机界面的设计。
The paper describes briefly the composition and function of the silicon rectifier control system as well as the program for achieving control functions and design of man-machine interface.
简要介绍了硅整流控制系统的组成、功能，实现控制功能的程序和人机界面的设计。
应用推荐