This paper introduces the design method and formulas of corrugated conical horns in engineering USES. The performance is in agreement with measurement results.
从工程应用角度给出了较为全面、系统、实用的波纹圆锥喇叭分析与综合设计方法，设计的波纹喇叭性能与实际测量结果非常吻合。
This paper presents each component and its design method of general-purpose measurement control board for safety driving assist System.
该文介绍了研发的汽车安全辅助驾驶系统中通用测量控制模板的各部分组成和设计方法。
The design method for space plasma source and measurement system is introduced in this paper.
文章介绍了空间等离子体源与测试系统的设计方法。
The experiment shows that this method not only simplifies design, improves measurement precision and generality of sensor, but also is suitable for the application.
实验表明：该方法简化了设计，提高了传感器的测量精度和通用性，有利于工程的实际应用。
The measurement accuracy control, hardware design and software engineering preparation method are from the projecting practice, which provides some reference and practical value.
其中计量精度控制方法、硬件设计方法和软件编制方法来自于工程实际，有一定的参考和实用价值。
A new method of design chaotic measurement circuits is presented, it simulates the electronic switch by DSP. The new chaotic measurement system has better linearity and less error.
提出了一种新的混沌测量电路设计方法，它利用DSP仿真电子开关，与已有的测量方法相比，具有更好的线性度和更小的误差。
Results of simulation with Moment of Method(MoM) and measurement of sample antenna proved that the design is correctly.
用矩量法进行模拟并进行实物测试，验证了设计的正确性。
In the modularization design method, usually compartmentalize the software module based on the special function of measurement and control task, module is not universal.
在目前的模块化设计方法中，通常依据测控任务的具体功能进行模块划分，模块的通用性受到限制。
A microwave resonator probe method for diagnosing local plasma electron density is described, and the measurement principle, design method and experiment results are included.
本文介绍了一种可以测量局部等离子体电子密度的微波共振探针法，并给出了它的测量原理、设计方法和实验结果。
The design method of the instrument is proposed, and the block diagram and controlled current-source as well as techniques for guaranteeing the measurement accuracy are given.
提出了仪器的设计方法，给出了仪器框图、受控电流源、电流控制原理及测量精度的保证措施。
The theory, mathematics method, technology of reacting electrical measurement is introduced in this article. The design of the system and the data processing for the system is also introduced.
阐述了轴功率测量系统的原理、数学方法、应变电测技术，系统的设计及数据处理。
The computer system of neutron distribution measurement and data processing in pool type reactor including its principle, method, design and work situation is described.
介绍了某池式研究堆中子通量分布测量及数据的计算机处理原理、方法、开发及工作情况。
Therefore, the author has adopted a method which makes the results from pressure distribution data be assorted with the data from the parts force measurement and put into use in the model design.
为此，笔者采用了一种以部件测力试验为基础，将测压试验数据积分结果及其分布协调处理到与部件测力试验结果一致的方法，并用于型号的设计研制中。
The paper gives the method of measurement of flow volume and accumulating flow volume, and demonstrates the skills of hardware design and software achievement.
文中给出了流量测量、积算的方法，阐明了系统硬件设计与软件实现的技巧。
In this article the design method of the intelligent pressure measurement instrument and analysis of error arid the application are introduced.
本文主要介绍智能压力测量仪的设计方法、误差分析及应用。
In order to overcome the low efficiency and low testing accuracy of testing method for gun rotated velocity, to design a new rate gyroscopes test system with digital measurement was put forward.
针对现有调炮速率测试方法存在的不足，提出了设计一套采用数字化测量方式的测试系统。
The structure design, cavity preparation, and measurement method of Loaded Q of an X-band TE011 mode superconducting Nb cavity have been described.
本文记述了一个X -波段，TE_011模式超导铌腔的结构、制备工艺、Q值测量方法和测量结果。
This method has been used in the design and measurement of imaging system of optical-electronic scanner and satisfactory results have been obtained.
该方法已用于光电图文扫描仪中变折射率透镜阵列的设计及测量，并获得了满意的结果。
Obtain the experiment data. According to this, design and prove the measurement system repeatedly, and verify the calculation method.
获得实验数据，并据此对测试系统进行重复设计和改进，对解算方法进行验证，使之达到总体设计的性能指标要求。
Focusing on the problem such as slow scanning speed, complex system design and low light efficiency, a simple method to obtaining optical sectioning in multiple-beam confocal measurement was proposed.
针对共焦测量中单点扫描速度慢、机构复杂、光能利用率低的问题，介绍了一种利用结构光和共焦显微术相结合来实现多光束测量的新方法。
It includes the connection function for the hardware and software design. This method is useful for connection and communication between the measurement instrument and computer.
软件设计方面作了详细的介绍，这种方法也适用于其它测量仪或外部设备与微机的连接与通讯。
The measurement method and design thought of the lateral rigidity of the single traction rod device are described.
介绍了单牵引拉杆装置横向刚度的测定方法和设计思路。
The hardware design emphasis random-weak-signal measurement in isotope tracer method, and reliability of the system has been discussed in the third part of this thesis.
在测量与控制系统的硬件中，重点研究了放射性测量中的随机信号以及弱电流脉冲信号的测量技术，文中还对测控系统的可靠性设计进行了研究。
It demonstrates that the method of data processing design is appropriate and simple, and it can be applied to other measurement systems.
这更说明了该数据处理方法设计合理，简单易行，可推广应用于其它测量系统。
Compared with the traditional methods for measuring the time-gap in pulse laser ranging, this method can simplify the design of a device and improve its measurement speed.
与脉冲激光测距技术中用于测量时间间隔的传统方法相对比，这种方法简化了器件设计，提高了测量速度。
FDTD method is used to calculate for optimum design and the measurement data is given out.
采用时域有限差分法进行优化设计计算，并给出了具体测试结果。
A new method of the performance measurement definition is presented based on unified telecommunication management network (TMN) requirements, analysis and design (UTRAD) methodology.
提出了一种基于统一的电信管理网需求、分析、设计(utrad)方法学的性能测量项定义方法。
This paper presents the design and measurement results of a new phase measurement method, which is based on quadrature phase demodulation and helped with MCS-51 single microcomputer.
介绍一种以正交鉴相为基础。以MCS - 51单片微机为核心的相位检测方案的设计思想和实验结果。
The design method of systemic hardware circuit and the wireless communication protocol is discussed. This introduced wireless measurement and control system.
讨论了系统的硬件电路的设计方法和点到多点的无线通信协议。
The initial stress is one of the most important parameters for the design of underground rock engineering, and hydro-fracturing method is a robust technique for stress measurement in deep rock mass.
初始地应力状态是岩石地下工程设计中的重要参数，而水压致裂法是深部岩体应力测量的理想方法。
应用推荐