High speed data transfer interface is an essential component of semiconductor laser imaging radar system.
高速数据传输接口是半导体激光成像雷达系统的重要组成部分。
SCSI-1 defined an 8-bit parallel interface with a 5MHz data clock, providing a maximum data transfer rate of 5 megabytes per second (MB/s).
SCSI-1定义了一种具有5MHz数据时钟的8-bit并行接口，能提供最高 5 兆字节每秒（5MB/s）的数据传输速率。
Instead, you should keep the interface small and lean to keep the amount of data to transfer as small as possible, thus reducing the transfer time [JDBCPerf].
相反，您应该使接口变小，并且使要传输的数据量尽可能的小，从而减少传输时间[jdbcperf]。
Analysis of data is made available by REST (REpresentational State Transfer) services, a standardized database interface that abstracts the database from the applications.
数据分析通过REST (REpresentational StateTransfer)服务变得可用，该服务是为应用程序提供数据库抽象的数据库接口。
This interface uses a peer-to-peer architecture in which peripherals negotiate bus conflicts to determine which device can best control a data transfer.
这种接口采用点对点架构，外周设备协商解决总线冲突问题，以确定哪个设备控制数据传输最佳。
TLI Is a programming interface to the transport layer of ISO-OSI model, it supports the transfer of data between two user processes in network.
TLI是ISO-OSI模型的传输层的一个编程界面，支持网络中两个用户进程间的数据传送。
The system is expandable, and configurable with network or USB interface for data transfer in accordance with user's requirements.
系统还具可扩展性，可根据用户要求配置网络或USB接口进行数据传输。
The method to implement data buffer and logical control of the data transfer through FPGA was introduced, and the design of the interface between FPGA and AD9240 was also shown up.
对如何用FPGA实现该数据采集系统的数据缓存和数据传输的逻辑控制，以及FPGA与AD9240的接口设计等给出了详细说明。
USB has been a PC standard interface which can transfer data in high speed.
通用串行总线USB已成为PC的标准接口，它可以实现高速的数据传递。
Parallel interface is usually adopted in the applications of data acquisition that need close -range data transfer and fast communication, such as CCD and video data acquisition.
在要求传输距离近，通信速度快的数据采集应用中，如CCD、视频数据采集，往往采用并行接口方式。
According to the characteristics of control and data transfer in data collect system, a general USB interface system is designed which is based on FIFO.
针对数据采集系统控制和数据传输的特点，设计了基于FIFO的通用usb接口。
This paper creates a safe, steady and integrated remote backup platform. According to stated tactic, the platform implements different backup mode, and offers a transfer interface for data comeback.
文章构建了一个安全、稳定、完备的远程备份平台，按照一定策略实现不同方式的远程备份，并提供数据恢复调用接口。
In addition, with the advent of next-generation smartphones that support the USB 3.0 interface, users will be able to transfer data much faster between mobile devices.
另外，与支持usb 3.0接口下一代智能手机的出现，用户将能够对移动设备之间的更快的数据传输。
To be more specific, the detailed data transfer agreement and the interface software plan for CAN bus communication are discussed on the basis of aluminum reduction requirements.
根据铝电解生产的特点详细讨论了传输的数据约定协议，给出了CAN总线通信接口软件设计方案。
This system realizes the process of modeling, data transfer and animation demonstration etc. , by a man-machine interaction mode. The interface is simple and intuitive to operate, and easy to master.
该系统以人机交互的方式实现了建模、数据传输和动画演示全部过程，界面操作简单直观，便于掌握和运用。
In contrast, data transfer speed and similarities in the type of contents or Internet interface to those provided by fixed broadband Internet services become more important for larger mobile devices.
相反，数据的传输速度以及网络界面及内容与非移动互联网的相似性是大型移动设备的主要参考因素。
Absrtact: It is important that checking the data exchange and transfer, controling the process and times for software interface testing.
摘 要：软件接口测试的重点是要检查数据的交换、传递和控制过程，还包括处理的次数。
Now, many image collector transfer inamge data to a computer through the computer interface, accomplish their work with the help of high computing speed and large storage capacity of the computer.
目前的图像采集设备大都要通过计算机接口将图像数据传输到计算机中，借助计算机的高运算速度和大存储容量完成图像采集工作。
Wireless communication is used to transfer data between measurement system and PC. The PC control interface is designed.
设计了PC机控制界面，使用无线通信实现了测量系统与PC机的数据传输。
The interface uses a circuit based on dual port FIFO buffer memory to realize data transfer of different I/O velocity between the two computers.
该接口采用双端口FIFO缓冲存储技术，实现两机间不同I／O速度的数据通信。
Making out the supervise interface with high level programming language0 it include data collection and transfer, storages, examine, Long-distance control.
用高级语言编程技术设计了上位机监控界面，包括数据传输采集、存储、查看、远程控制等，完成了基本框架。
This paper describes a scanner high-end that USES double interface to enhance transfer rate for high volume image data.
介绍一种采用双机接口的，提高大容量图象数据传输性能的电分机高端联网系统。
Thirdly, the system can transfer data to PC at a high speed on the series interface based on USB2.0 technology, which is satisfied with the demand for a great many data transmission.
本系统运用USB2.0高速数据串行传输接口技术，实现了数据串行高速传输，满足了高数据吞吐量要求。
The data transfer of USB used in this paper conquers some disadvantages, such as low speed, complex of connecting and so on, providing a new pattern interface for the data transfer of plotter .
本论文采用的USB这种传输方式，克服了以往绘图机利用并行电缆带来地低速、迮线复杂等种种缺点，为绘图机的数据传输提供了一种崭新的新型接口。
We choose USB (Universal Serial Bus) as the communication interface of DSP and the computer which can fulfill up data transfer and the control to DSP.
系统选用USB(通用串行接口)作为和上位机通信的接口，实现处理数据的上传以及上位机对DSP的控制。
We choose USB (Universal Serial Bus) as the communication interface of DSP and the computer which can fulfill up data transfer and the control to DSP.
系统选用USB(通用串行接口)作为和上位机通信的接口，实现处理数据的上传以及上位机对DSP的控制。
应用推荐