So Current measurement is the basic of Electromagnetic surveying.
所以电流的测量是电磁测量的基础。
The system of the rotor position using the eddy current measurement sensors.
本系统的转子位置测量采用了电涡流传感器。
But the current measurement of prosperity is riddled with errors and omissions.
但是，当前的繁荣衡量到处都是错误和漏洞。
The coil can be used in pulsed power technology for ns-level high current measurement.
自积分式罗氏线圈广泛用于脉冲功率技术中的快过程大电流测量。
A number of error sources can have serious impacts on low current measurement accuracy.
若干误差源会对弱电流测量的准确度产生严重的影响。
We will make use of this practice with a multimeter circuit voltage and current measurement.
我们意志用万用表线路电压和现在的测量利用这个练习。
The principle of capacitance current measurement based on the injecting signal is discussed.
论述了采用注入变频信号测量电容电流的原理。
This article introduces the principle of current measurement for shunt ammeter and feedback ammeter.
介绍了分流式和反馈式电流表测量直流电流的基本原理。
Current transformer TA1: providing primary current measurement and primary current over-current signal.
电流互感器TA 1：提供一次电流测量和一次电流过流信号。
Several methods for oversampling of current measurement signal are introduced, for example, algorism filter, etc.
介绍电流测定信号的过采样的几种方法，例如十进制滤波器等。
The magneto-optical current sensor is based on Farada effect and Ampere's law to realize the current measurement.
磁光式电流传感器是基于法拉第效应和安培环路定律实现电流测量的。
A new method of current measurement is discussed in the paper. The fundamental is analysed theoretically and tested.
本文讨论了一种新的电流检测方法，对其原理进行了理论分析及实验验证。
For this application, a single instrument provides both the voltage sourcing and the low current measurement functions.
对于这种应用，单台仪器提供了电压源和小电流测量功能。
The plasma toroidal voltage and toroidal current measurement methods and some results on SWIP-RFP device are presented.
介绍SWIP - RF P装置等离子体环电压和环电流的测量方法和测量结果。
In a word, we think that the current measurement option of biological assets is a mixture of all measurement attributes.
总之，我们认为，多种计量属性并存是我国生物资产计量的现实选择。
Simultaneously the current measurement method and the measurement personnel's quality also with difficulty meet its need.
同时当前的计量手段和计量人员的素质也难以满足其需求。
A low current measurement system may also require significant settling time be fore the expected accuracy can be obtained.
对于小电流测量系统，也需要足够的稳定时间才能够获得预期的准确度。
Simultaneously the current measurement method and the measurement personnel's quality also with difficulty meets its need.
同时当前的计量手段和计量人员的素质也难以满足其需求。
Low current measurement applications include capacitor leakage, low current semiconductor, light, and ion beam measurements.
弱电流测量的各种应用包括电容器的漏电、弱电流半导体、光和离子束测量等。
Some improvements of inducing technique for critical current measurement of short sample of the superconductor have been made.
本文介绍了我们对感应法测量超导线短样临介电流技术的若干改进。
For DC current measurement, a current shunt is place in series in the current path and convert the current to a DC voltage signal.
对于直流电流测量﹐在电流通道串联一电流分流器﹐将电流转换成直流电压信号。
The hardware system includes the speed measurement circuit, current measurement circuit, PWM drive circuit and DSP exterior circuit.
硬件系统主要包括速度检测电路、电流检测电路、PWM输出电路、DSP外部电路。
The most important technique is voltage amplifier design in study of micro current measurement on condition that noise is restrained.
在微电流测量技术中，主要是考虑在有效抑制噪声的条件下对从微电流转换来的电压信号放大方法的研究。
Corrosion inhibitors were selected and tested by method of collected gas, corrosion current measurement and simulated battery discharge.
本文利用收集气体、测定腐蚀电流和模拟电池放电等方法来选择和检验缓蚀剂。
The common methods of current measurement for motor are presented, for example, instantaneous value measurement, integral measurement, etc.
同时阐述了电动机电流测定的常用方法，如瞬时值的测定，积分测定等。
The invention furthermore provides that the clock patterns are selected taking into consideration a phase selection for the current measurement.
此外规定在考虑针对电流测量的相选择下选择该节拍模式。
This system can be used not only in ESD generator verification, but also in other ESD current measurement and electrostatic mechanism research fields.
除用于ESD模拟器校验，该装置还可广泛用于其它形式静电放电电流测量和静电放电机理研究。
In this paper, a comprehensive method combined by DC component method, AC superposition method and loss current measurement method are described at first.
首先介绍了由“直流分量法”、“交流叠加法”和“损耗电流测量法”三者结合起来的综合判断方法，然后重点论述了交流叠加法的具体实现方案。
After the connections are made, verify the system is working properly by turning the bias voltage on and taking a current measurement with no ion beam current.
完成电路连接之后，接通偏置电压，在没有离子束电流的情况下进行电流测量，以验证系统能够正常工作。
The growth laws of hot carrier damage of PMOSFET's during the hot carrier degradation and the high field annealing are studied by direct gate current measurement.
通过直接栅电流测量方法研究了热载流子退化和高栅压退火过程中PMOSFET ' s热载流子损伤的生长规律。
应用推荐