The transient heat transfer process of piston set-cylinder liner system in gasoline engine was researched with direct coupling finite element method (FEM).
采用直接耦合的有限元分析方法对一汽油机的活塞组—气缸套系统的瞬态传热过程进行了研究。
The densification and deformation behavior of porous materials during the ECAP process were investigated by (thermo -) mechanical coupling finite element method.
针对粉末多孔材料，采用体积可压缩刚粘塑性热力耦合有限元法对其等径角挤压过程进行模拟分析。
In this paper it is suggested to solve the direct problem of magnetic prospecting under complicated conditions by coupling finite element method and boundary element method.
本文提出用有限元法和边界元法相结合解复杂条件下的磁法勘探正问题。
The mixed method of boundary element and fractal finite element is adopted to solve the cracked structure-acoustic coupling problems.
应用分配形有限元和边界元相结合的方法于含裂纹的结构声相互作用问题。
As widely application of FEA in product design and performance, the finite element method is used to analyze the structure of nebulizers based on the piezoelectric coupling theory.
基于有限元方法在产品设计和性能分析中的广泛应用，根据压电耦合有限元分析理论，对雾化器结构进行了深入的分析。
The calculation code including manifold method (MM) and finite element method (FEM) is developed to study the non-simultaneous coupling problem of stress-strain and seepage for discontinuous material.
提出了一个用流形元与有限元的变形和渗流非同步耦合的分析方法，用于模拟不连续块体在水压作用下的变形过程。
The mathematical model of fluid percolation and rock deformation of fluid-solid coupling is solved with the finite difference method and the finite element method respectively.
分别采用有限差分法和有限元法对流固耦合流体渗流数学模型与岩石变形数学模型进行了求解。
Solidification microstructures in heavy section high manganese steel casting were simulated using coupling cellular automaton(CA)and finite element method(FEM).
采用元胞自动机与有限元相耦合的方法模拟厚断面高锰钢铸件凝固组织。
In addition, the coupling stiffness of the double rotors was successfully calculated with the finite element method.
文中还利用有限元法有效地解决了主轴双转子耦合刚度的计算问题。
Adopting finite element analysis method, the stress and deformation of gear coupling is analyzed, the cause of gear coupling failure is found, and the structure is optimized.
运用有限元分析方法，对齿轮联轴器进行应力、变形的分析，找出齿轮联轴器的失效原因并对它的结构设计进行了优化。
The simulation method of the rigid-elastic coupling control system is introduced by using the interaction of the finite element analysis software and the control system simulation software.
该文介绍了交互使用有限元分析软件和控制系统仿真软件实现具有刚柔耦合结构复杂系统的仿真方法。
The seismic analysis of liquid storage container is conducted by finite element method for transient dynamic fluid-solid coupling model.
应用流体固体动力耦合统一分析模型的有限元法，进行了储液池的抗震分析。
In this paper, coupling methods of finite element method and boundary element method are expounded, and the coupling methods of linear elastic problems for underground engineering are tried.
本文阐述有限元与边界元耦合的基本方法，并对地下工程中线弹性问题的耦合法进行了尝试。
Coupling analysis method of finite element and infinite element is proposed to be used in the structural anti-seismic analysis of metro tunnel on the basis of soil-structure interaction theory.
在土体与结构动力相互作用理论的基础上，提出用有限元和无限元耦合分析法对地铁隧道结构进行抗震分析。
The numerical method represents a coupling between the optimum method of advance and retreat and the finite element analysis for the design on large hoist drums of cranes that is an actual structure.
采用空间薄壁板壳元与空间梁元混合离散模型对大吨位起重机钢丝绳缠绕卷筒进行有限元分析，将有限元方法与进退法优化方法耦合形成数值算法进而对卷筒进行优化设计。
In this paper, a simpler and direct coupling method, i. e. finite element method coupled with singular solution of infinite plane with a hole, is proposed for the analysis of underground engineering.
提出一种简单直接的耦合方法，即含有空洞的无限平面奇异解与有限元耦合来求解无限平面问题。
In this paper, the stresses of gravity dam and dam foundation are calculated by the coupling method of finite element and half plane boundary element.
本文用有限元与半平面边界元耦合法计算了坝体坝基应力，又结合边界配置法求出了坝踵应力强度因子。
Deformation in railway wheel for heat treatment was analyzed with finite element method, in which the coupling of temperature, phase transformation and stress was considered.
在考虑了温度、相变及应力的耦合作用的基础上，运用有限元法分析了车轮热处理过程的变形。
Therefore, it's of vital importance in the engineering aspect to simulate the coupling beams based on finite element method (FEM for short).
因此，对连梁进行有限元建模、分析以及验证具有一定的工程意义。
The technique of the 3D finite element method(FEM) of coupling seepage, expanse and stress was studied, and the corresponding program for the FEM of strength reduction method was developed.
在探索多场耦合理论基础上，研制出了一个考虑渗流场和膨胀变形对应力场作用的三维强度折减有限元程序。
The technique of the 3D finite element method(FEM) of coupling seepage, expanse and stress was studied, and the corresponding program for the FEM of strength reduction method was developed.
在探索多场耦合理论基础上，研制出了一个考虑渗流场和膨胀变形对应力场作用的三维强度折减有限元程序。
应用推荐