The satisfactory controller design problem can be completely transformed to solution of the LMIs without manual intervening in choosing parameters.
满意控制器设计可以完全转化为线性矩阵不等式的求解问题，不需要人工干预选择参数。
We consider robust controller design problem of a class of linear systems for actuator and control surface damage, we presented tolerant robust controller design method.
对执行器故障和控制面故障情况，提出了容错的鲁棒控制器的设计方法。
Exponential stability and controller design problem for dynamical output feedback networked control systems (NCSs) with network-induce delay and data packet dropout is studied.
在同时考虑网络诱导时延和数据包丢失的基础上，研究了动态输出反馈网络控制系统指数稳定性和控制器设计问题。
Then, base on the problem of attitude control of a satellite under development, we design a NN compensation controller for high accuracy orientation phase.
然后，基于某型小卫星的姿态控制问题，设计了高精度定向阶段的神经网络补偿控制器。
A continuous simulated annealing algorithm with global convergence ability is applied to solve this controller parameters optimization design problem.
采用一类全局收敛的连续模拟退火算法完成了控制器参数的优化设计。
Sampled-data control theory offers theory guidance for computer control and design of sampled-data controller is a core problem of sampled-data control theory.
为计算机控制提供理论指导的是采样控制理论，而采样控制器设计是采样控制理论的一个核心问题。
The problem of robust controller design for dynamic output feedback networked control systems with uncertain time-delay is studied.
研究了具有不确定时延的动态输出反馈网络控制系统鲁棒控制器设计问题。
The problem of controller design is discussed for unity-feedback control systems satisfying steady state performance.
讨论了单位反馈控制系统在满足稳态特性条件下的控制器设计问题。
The authors study the design problem of observer-based robustly stable controller for time-delay systems with a class of nonlinear uncertainty.
研究了一类具有非线性不确定性时滞系统的基于状态观测器的鲁棒稳定控制器的设计问题。
To solve the chattering problem caused by general Sliding Mode control in active magnetic bearings control, a Boundary Layer Approach was used in the controller design.
针对常规滑模变结构控制方法在电磁轴承控制当中引起的抖动问题，将边界层法用于滑模变结构控制器的设计。
The integrated design problem of feedback controller and robust fault detection filter is studied for uncertain linear time invariant system.
研究线性不确定系统的反馈控制器与鲁棒故障检测滤波器集成设计问题。
According to the existing problem of hot-blast stove control system used in Baoji electric locomotive depot, have proposed the design plan of the controller and implementing scheme of the system.
根据宝鸡电力机车段生产中使用的热风炉控制系统存在的问题，提出了控制器的设计方案和系统的实施方案。
Aiming at the design problem of traffic light controller, this paper puts forward a hardware realization method of traffic light controller with VHDL.
针对交通信号灯控制器的设计问题，提出了基于VHDL语言的交通信号灯控制器的硬件实现方法。
This paper considers the problem of state feedback guaranteed cost controller design for singular time-delay systems with norm-bounded parameter uncertainty.
本文研究了含范数有界参数不确定性的奇异时滞系统的时滞相关型状态反馈保性能控制器的设计问题。
The problem of quadratic stability and controller design for T-S fuzzy systems is studied using the linear matrix inequality(LMI)methods.
应用LMI（线性矩阵不等式）方法，研究了T-S模糊系统二次稳定性及控制器设计问题。
This paper researches the design of sliding-mode controller and stability problem for networked control systems with network-induced delay is studied.
研究具有网络诱导时延的网络控制系统滑模控制器设计及稳定性分析问题。
This paper studies the problem of robust controller design for the systems with mixed uncertainties which are described by integral quadratic constraints and parametric perturbations.
本文研究了积分二次约束下具有混合摄动的不确定系统的鲁棒控制器设计问题。
As for a class of T-S fuzzy descriptor systems with norm-bounded uncertainties, the design problem of observer-based passive fuzzy controller was studied.
针对一类范数有界不确定性t - S模糊广义系统，研究了其在满足不确定性的基于观测器的无源控制器的设计问题。
MMP nonlinear controller for a distillation column is deduced by utilizing the model matching problem of nonlinear system for the controller design of a distillation column.
将非线性系统模型匹配问题（MMP）应用于精馏塔产品质量控制器的设计，得到精馏塔的MMP非线性控制器。
Programming the complex control algorithms and soft redundancy switching to the controller, and design the system structure rationally, it solves the control problem in refinery.
通过软件编程的方式将复杂控制算法和软冗余切换程序嵌入到控制器中运行，并合理设计系统结构，解决了炼油装置的疑难控制问题。
This paper analyzes the features and problem of PID controller, and presents the principle, structure and design of the auto-disturbance-rejection controller (ADRC).
针对在工业中广泛应用的PID控制器的特点及存在的问题做了分析，并介绍了自抗扰控制技术的原理、结构、以及控制器的设计。
The optimization design problem of controller parameters of optimal on-off times attitude maneuvers with switch moment is investigated.
研究空间飞行器大角度姿态机动反馈开关控制的消振参数优化设计问题。
A modal controller design of defective system was presented, and it was applied in the flutter control problem of an airfoil.
讨论了亏损系统模态控制的设计方法，并将其应用在飞机机翼颤振的控制问题中。
And a simulated annealing algorithm is applied to solve this controller parameters optimization design problem.
采用模拟退火算法完成了控制器参数的优化设计。
This paper deals with the design problem of a model reference adaptive control system using relay-type adaptive law. A novel design method is presented and a reduced adaptive controller is obtained.
本文对采用继电型自适应律的模型参考自适应控制系统提出了一种新的设计方法，并获得一种降阶自适应控制器。
This paper deals with the problem of observer and controller design for a class of networked control systems where the network connection only exists between the sensor and controller.
本文研究仅仅在传感器与控制器之间存在网络的网络化控制系统的观测器以及控制器的设计问题。
In this paper, a new design method of nonlinear PID controller with optimal correction function is presented. It can solve the control problem of a complicated nonlinear plant simply and effectively.
该文提出了一种带优化修正函数的非线性PID控制器设计方法，用它设计的控制器能对复杂非线性对象进行简单而有效的控制。
In order to solve the problem mentioned above, a novel design which combines three phase fourlegs inverter, repetitive controller and PI double loop control.
本文将三相四桥臂逆变器与重复控制技术、PI双闭环控制相结合，满足了非线性不平衡负载的要求。
The key problem in the synthesis of the controller design for active DC filters(ADF) in DC side of converter station is to obtain the mathematical models of controlled device.
研究HVDC系统直流侧综合有源直流滤波器（ADF）控制器的关键是确定被控对象的数学模型。
The key problem in the synthesis of the controller design for active DC filters(ADF) in DC side of converter station is to obtain the mathematical models of controlled device.
研究HVDC系统直流侧综合有源直流滤波器（ADF）控制器的关键是确定被控对象的数学模型。
应用推荐