Meanwhile, an average current mode controlled power source is used to provide constant charging current to these selected cells.
同时，一个平均电流模式控制的电流源被用来对选中的单体提供恒定的充电电流。
The ideas of constructing of the control circuit of full-function controlled power source for arc welding are suggested in this paper, with their features analyzed.
提出了全功能弧焊电源控制电路的各类设计方案，分析了它们的特点；并提出了一种电源控制系统的电路设计方案；分析其基本工作原理和获得的各类电源输出外特性。
Based on the study on the analogously controlled and microcomputer controlled power source, a new 8098 single-chip microcomputer controlled welding machine is developed for the pulse TIG welding.
在模拟控制和微机控制技术研究的基础上，开展了8098单片机控制脉冲tig焊机的研制工作。
It is powered and controlled externally, but he plans to develop an onboard power source and sensors, and to refine the robot's control systems.
这只小昆虫由外部提供电力和控制，但他计划开发一个板载的电源的传感器，进一步完成机器人的控制系统。
In interconnected hybrid wind farm system, the voltage fluctuation can be alleviated and the reactive power can be controlled by voltage source converter.
在风电场混合并网系统中，通过电压源换相高压直流输电可以控制系统中的无功功率、抑制并网公共点的电压波动。
The GTO drive source of the power stepping motor is made up of the new-type of switching elements—the Gate turn-off Controlled Rectifier (GTO).
功率步进电机的GTO驱动电源，采用了新型开关元件“可关断可控硅”（简称GTO）。
The series controller is equivalent to the controlled voltage source that compensating the voltage harmonic and the voltage fluctuation from the power system.
串联控制器等效为一个受控电压源，补偿来自电网侧的电压谐波和抑制电压波动，提高配电系统的供电电压质量；
Shield current source is controlled by using variable power circuit, this greatly improves dynamic range.
深、浅屏流源采用可变功率控制，提高了仪器的动态范围。
A medium frequency induction heating power source controlled by the microprocessor can not be run normally, in case its synchronous signals are disturbed by the harmonic from common network.
由于同步信号受电网谐波的干扰，常使微机控制的中频感应加热电源不能正常运行。
The optimization matching between the power of electrical source and the action time of magnetic field is a important controlled parameters in order to gain high separation efficiency.
电源功率与磁场作用时间的优化匹配是获得高分离效率的一个重要控制参数。
The experiment shows that the operation of TIG power source which controlled by microcomputer is steady and reliable, and the required precision has been reached.
经过实际焊接工艺试验，证明该系统运行稳定、可靠，达到了所要求的控制精度。
Microcomputer controlled arc welding inverter power source can raises greatly controlled level of pulse MIG welding for its flexible control, high accuracy, high system response.
采用微机控制的弧焊逆变电源控制灵活、精度高、系统响应高的特点，能够极大提高脉冲MIG焊的控制水平。
The final basic cause that resulted in the failure is no working state monitoring signal and failure warning signal of power supply source of controlled silicon excitation device.
最终查出造成机组事故的根本原因是可控硅励磁装置供电电源无工作状态监视信号及故障报警信号；
On-line communicational silicon-controlled rectification power source with consumable electricity and low efficiency will increase operating cost.
在线通信用可控硅整流电源自身电耗高、效率低，使运行成本增加；
The SCR controlled welding power source is potential to be developed.
晶闸管焊接电源由于其自身特点，仍然具有潜力可挖掘；
The hardware and software of a developed 8098 single-chip microcomputer controlled MOSFET precise spot welding power source have been introduced in the paper.
对所研制的由8098单片机控制的MOSFET精密点焊电源的硬件及软件进行了介绍。
Dynamic process of current is controlled quickly by the first inverter, and arc polarity is controlled by the second inverter of arc welding power source.
弧焊电源一次逆变控制电流快速动态过程，二次逆变控制电弧极性。
A protective circuit is serially connected between a controlled current source and a power operation processing circuit.
所述的受控电流源与功率运算处理电路之间串接保护电路。
A microcomputer controlled IGBT inverter power source for pulsed MIG welding is developed. It realizes the self adaptive control and closed loop control of arc voltage in pulsed MIG welding process.
建立了微机控制和IGBT逆变式脉冲MIG焊电源系统，实现了MIG焊接过程弧压自适应闭环控制。
A square-wave AC high-frequency welding power source is composed of the square-wave AC high-frequency generator and DC welding machine controlled by thyristor.
将晶闸管直流焊机与方波交流高频发生装置组合，构成方波交流高频焊接电源。
Silicon controlled static frequency convectors are used as medium frequency power source for this series of furnaces.
本系列电炉采用可控硅静止变频为中频电源进行感应加热。
Wire feeder of four drive roll system is controlled bu welding power source with the advantages of stable feed speed, good start and brake characteristics, easy to move.
采用四轮驱动送丝机，受焊接电源控制，送丝稳定，启动，制动良好，维护方便。
At the special request of robot, this paper study a IGBT inverter arc welding power source which is controlled by high speed single-chip microcomputer 80c320.
根据机器人焊接电源的要求，研究了一种由高速单片机80c3 2 0为控制器的IGBT逆变式弧焊电源。
At the special request of robot, this paper study a IGBT inverter arc welding power source which is controlled by high speed single-chip microcomputer 80c320.
根据机器人焊接电源的要求，研究了一种由高速单片机80c3 2 0为控制器的IGBT逆变式弧焊电源。
应用推荐