Put forward a design proposal for the LCD control based on DSP.
提出了一种基于DSP控制的液晶显示屏的设计方案。
Application of DSP in active noise control, noise control principle and algorithm implementation of noise control based on DSP are presented. In the end, experiment al result is also given.
介绍了DSP在有源噪声控制中的噪声控制原理、应用及基于DSP的噪声控制算法实现，最后给出了实验结果。
VLIW DSP has simple control hardware, and its ILP is decided during the compile time, so compiler is the key factor in developing applications based on VLIW DSP.
VLIWDSP机器由于硬件控制简单，指令的并行性完全在编译时决定。因此编译程序成为基于VLIW DSP机器应用的关键因素。
This paper does some research works of the vector control technology based on rotator field oriented and then designs the whole system with DSP.
本文针对转子磁场定向的矢量控制技术进行了一些研究和探索，并用DSP实现控制系统的全数字化设计。
So, the thesis adopts a type of low loss DSP processor as main controller which composing the control and fault feeder detection system based on DSP in order to deal with the question.
因此论文采用了低功耗的数字信号处理器作为主控芯片，构成一种基于数字信号处理器的控制与选线系统。
This topic research and develop SVC (Static Var Compensator) control system based on DSP, was the embeded system computer technology and electric power electronic technology integrate example.
本课题研究开发了基于DSP的SVC(动态静止型无功补偿)控制系统，是嵌入式计算机技术与电力电子技术结合的一个实例。
According to the characteristic of BLDCM and the function of the chip, sensor control solutions which are based on DSP technology are presented.
根据无刷直流电动机的特点和DSP芯片的功能，提出了基于DSP的控制方案。
The paper is completed research of measurement and control system based on DSP under technology.
本论文正是在电液伺服控制技术的基础上，完成了基于DSP的电液伺服测控系统的研究。
With speed and current close-loop control based on digital PI algorithm and the high performance of the DSP, high accuracy and high reliability control can be easily realized.
通过速度与电流的双闭环数字PI算法结合DSP的优越性能来达到高精度，高可靠性的控制目的。
The software and hardware of the control system and control algorithm based on DSP were designed.
同时给出了控制算法与控制系统的软、硬件设计。
It is composed of a circular autorotation crawling mechanism, a CCD camera, a movement control card based on DSP and a high-resolution image acquisition card, and so on.
该系统由环形自转式运动机构、CCD摄像机以及基于DSP的运动控制卡和高分辨率的图像采集卡等组成。
A design is described in the paper that step motor motion controller is a down location control unit based on DSP kernel.
本文提出了一套基于DSP内核的运动控制器的设计方案。
Then it explains the performance and characteristic of this DSP. We design the control system which is based on TMS320LF2407A DSP.
简要介绍了这款数字信号处理器的功能和特点，设计了以TMS320LF2407A DSP控制器为核心的控制系统。
The main content of this paper is about the design of digital control system of AMB based on DSP.
本文主要内容是以数字信号处理器(dsp)为核心设计主动磁轴承的数字控制系统。
The platform of synchronization control is a IF digital processing module based on DSP.
电台同步控制的平台为基于DSP的中频数字化处理模块。
Then, introduces about DSP , which is the basis knowledge of next design Based on DSP exciter control devices .
然后，介绍了DSP的基础知识，为下一步进行设计基于DSP的励磁控制装置做好准备。
The design of motion control board based on DSP and FPGA was introduced, the principle of the design was analyzed.
介绍了一种基于DSP和FPGA的运动控制板的设计方法，分析了其原理，具有很好的参考价值。
A new control mode of diamond pressure machine was introduced, which is embedded control system based on DSP (TMS320LF2407), also, hardware design and software design were introduced in this paper.
本文提出了一种金刚石压机的新型控制模式—基于DSP (TMS320 LF 2407)的嵌入式控制系统，并介绍了该控制系统的软硬件设计。
This paper gives a design of sensor-less direct torque control system based on DSP (TMS320LF2407A). The hardware and software schemes are introduced.
提出了一种基于DSP（TMS320LF2407A）无速度传感器直接转矩控制系统，给出了硬件设计和软件设计方案。
This paper presents a software and hard ward design of a development and experiment platform for digital motor control based on TMS320F240 DSP.
介绍了基于数字信号处理器TMS320F240的数字化电机控制开发与试验平台的软硬件设计。
Digital servo-control technology based on DSP and CPLD is used to solve airborne application problems of optical-electronic sensor: isolating vibration of airplane and tracking pilot helm.
采用基于DSP和CPLD的数字化伺服控制技术解决光电传感器的机载应用问题：隔离机体的高频振动并随动于驾驶员头盔。
The paper presents a kind of vector control system based on DSP.
介绍一种基于DSP的感应电机矢量控制系统。
In this paper, a DC brushless motor servo-control system based on DSP is designed.
本文设计了一种基于DSP的直流无刷电动机伺服控制系统。
This paper presents a digitized DC motor position servo control system based on DSP.
提出一种基于数字信号处理器（DSP）的全数字直流位置伺服控制系统。
This article introduces the designs a universal and highperformance control system platform based on TMS320LF2407A DSP.
本文介绍了一套基于TMS320 LF 2407 ADSP的高性能通用控制系统平台的设计。
This paper introduces the design method of an infrared focusing control system based on DSP.
介绍一种基于DSP的红外调焦控制系统的设计方法。
In this paper, a brushless motor control platform which is based on DSP and made of PC and GMC2407 is adopted.
本文采用了PC机、GMC2407运动控制专业平台来构成一个基于DSP的无刷直流电动机控制的试验平台。
The control of APF based on DSP is the separation technique of command current, and algorithm application.
基于DSP的有源电力滤波器的控制主要涉及指令电流分离技术及其控制算法的应用。
A circuit control system based on DSP (TMS320LF2407A) for die-casting machine is introduced in this paper.
介绍了一种基于DSP (TMS320 LF 2407)的压铸机电控系统设计。
A circuit control system based on DSP (TMS320LF2407A) for die-casting machine is introduced in this paper.
介绍了一种基于DSP (TMS320 LF 2407)的压铸机电控系统设计。
应用推荐