A second component, the WSDM Controller, provides simple feedback from the server and configuration of the server itself.
第二个组件是WSDM控制器，提供服务器的简单反馈和服务器自身的配置。
The disk configuration is a mix of IBM EXP arrays attached to a SCSI controller and a FAStT 600 system, connected to the server via two QLogic fiber CARDS.
磁盘配置是混合的IBMexp阵列，附到一个SCSI控制器和一个FAStT 600系统上，通过两个QLogic光纤卡连接到服务器。
The disk configuration is a mix of IBM EXP arrays attached to a SCSI controller, and a FAStT 600 system connected to the server via two QLogic fiber cards.
磁盘配置采用了一个IBMEXP阵列，连接到一个SCSI控制器上；一个FAStT 600系统，通过两个QLogic 的光纤卡连接到服务器上。
In the MTS vest-based configuration, the Tactical Mission Controller (TMC)—a low-profile processing platform, peripheral controller and power manager—is carried on the rear of the plate-carrier.
在MTS的背心配置中，战术任务控制器（TMC）置于装甲载具后方，包括一个低姿态处理平台、外设控制器和电源管理器。
Configuration Major layers of the application — in the RentaBike application, I expose a Data Access Object (DAO) layer, a controller layer, and a view layer (see Listing 1).
配置应用程序的主要层——在RentaBike应用程序中，我公开了一个数据访问对象(dao)层、一个控制器层和一个视图层(参阅清单1)。
First, Red Hat Linux 8.0 detected our RAID controller out of the box without any need for special configuration or additional drivers; 7.3 did not.
首先，RedHatLinux 8.0不需要任何特殊配置或额外的驱动程序就能立刻检测到我们的RAID控制器；而7.3不行。
It explained the composed hardware, controlling method, configuration process, the operation environment of configuration software and the setting of controller parameter under this environment.
详述了该系统的硬件组成、控制方法、组态过程、组态软件的运行环境及在此运行环境下控制器参数的设定。
Pages 94 to 100 of the official Controller 8.5 document “Installation and Configuration Guide” (“ctrl_inst.pdf”)
Controller 8.5官方文档 “InstallationandConfigurationGuide”（“ctrl_inst.pdf”）第 94-100页。
This paper aims at exploiting a graphic control strategy configuration software, in order to create required control strategy of controller.
本文的目标是开发一个图形化控制策略组态软件，以生成控制器所需要的完成控制功能的软件。
The implementation of closed loop control, the configuration of the fuzzy controller, the design of fuzzy control regulation and the calculation of fuzzy control inquiring table are described.
详细叙述了系统实现闭环控制、模糊控制器的结构、模糊控制规则的设计及模糊控制查询表的计算。
Based on the idea of intelligent control and configuration of nine-point controller, the concepts seven-state controller is presented.
基于智能控制的思想，在九点控制器的基础上，提出了七态控制器的概念。
The specification of programmable controller, PLC hardware configuration, software design, programmer, operation mode and furnace purging flame detection and it principle are presented concretely.
具体介绍了可编程序控制器性能指标，PLC硬件配置，软件设计，编程器，操作方式以及炉膛吹扫，火焰检测及火检原理等。
This paper presents the general form of a model free control law and the engineering meaning of its parameters, and describes the way to set the parameter configuration of the model free controller.
该文对无模型控制律的一般形式及其参数的工程含义进行了介绍，详细说明了无模型控制器的参数组态的设定问题。
Forward the foundation and linear of the system model, the optimal controller and the state observer were designed by using the optimal control theory and the manner of pole configuration.
对水下航行器热动力推进系统的非线性模型进行了线性化处理，应用线性二次型控制方法设计了系统的最优控制器，采用极点配置的方法设计了系统的状态估值器。
The application of STB-4201 four loop programmable controller in HAC reactor, is recounted with process configuration and programming. Safisfactory results are obtained.
叙述了STB—4201四回路可编程序调节器在醋酸氧化塔的应用，结合具体工艺，进行了组态编程，应用效果良好。
Hardware and software configuration of drive system with position controller, DC drive unit and PLC for a retainer of semi-floating mandrel mill are analysed.
分析了由位置控制器、直流传动装置和PLC组成的半浮芯棒连轧机组限动链控制系统的硬件配置及软件组成。
Also have introduced the function and realization of PCI32 module, DMA controller module, FIFO module, the configuration space module, outside FIFO controlling module in the main program at length.
详细介绍了主程序中的PCI32模块、DMA控制器模块、FIFO模块、配置空间模块、外部FIFO控制模块的功能和实现。
It includes that the bus controller PCI9054 action, the simulation of the CPU design with CPLD on the LOCAL bus side, configuration of EEPROM and the bus operation of the data transmission.
介绍了总线控制器pci9054的桥式作用、用可编程逻辑器件模拟LOCAL总线侧cpu的设计、EEPROM的配置以及总线的数据传输操作过程，然后在此基础上给出了数据采集系统的设计。
With the use of FISHER regulating valve and KMM programmable controller, the operational quality of the system was improved and the system configuration optimized.
采用FISHER调节阀门和kmm可编程序调节器，提高了自动调节系统的调节质量和可靠性，优化了系统结构。
Robot controller is designed with RVD chip, under RVD software environment, function modules based on configuration principle can be established with according to requirement of flow chart.
采用RVD处理芯片设计机器人控制器，根据流程需要，在RVD软件环境下建立组态原理功能模块。
The I/O design of PLC controller, the hardware configuration and the main routine and auto-machining subroutine of software program are presented.
介绍了系统PLC主控制器I/O端口设计，系统硬件组成和系统软件中主程序及自动加工子程序设计；
This paper introduced constitution and configuration of TDC-3000BASIC DCS and principle of Basic controller. And gave configuration of simple loop.
介绍了TDC— 30 0 0BASIC集散控制系统的组成和组态，基本控制器的工作原理。并给出了简单回路的组态。
The configuration of medium and small size automatic control system R150 is described. It is composed of controller, logical controller and monitoring station.
介绍了中小型自动控制系统(R15 0系统)的配置，由控制器、逻辑控制器及监控站组成。
The configuration of medium and small size automatic control system R150 is described. It is composed of controller, logical controller and monitoring station.
介绍了中小型自动控制系统(R15 0系统)的配置，由控制器、逻辑控制器及监控站组成。
应用推荐