Compressor modeling is based on a stable state model.
压缩机模型采用全稳态模型。
The compressor model was based on the steady lumped parameter method.
以稳态集中参数法建立了压缩机模型；
It is also a very good practice to keep one filter and separator change in inventory with the boxes marked with the compressor model and serial number the parts go to.
这也是一个非常好的做法，以保持库存的箱子一个过滤器和分离器改变压缩机的型号和序列号标记的部分去。
With a widely used method for actual superheat temperature correction, the inverter air-conditioner compressor model is built up on the basis of performance curves fitting.
在图形法拟合的基础上，借鉴成熟的对实际过热度进行修正的方法，建立了变频空调器压缩机模型。
XMLPPM is a streaming XML compressor that USES a multiplexed hierarchical PPM model called MHM.
XMLPPM是流xml压缩器，使用称为MHM的复用分层ppm模型。
XAUST groups all data for the same element into a single container, which is compressed incrementally using a single model for an arithmetic order-4 compressor.
XAUST将同一元素的所有数据都归入单一容器，然后使用算order - 4压缩器的单个模型以递增方式压缩该容器。
On the basic of former engine, the angle variable partial program of the fan and compressor guide vane of engine mathematical model is been renewed.
在原发动机模型的基础上，补充编制了发动机数学模型的风扇和压气机导叶角度可调的部分程序；
And the capacities of compressor could be selected by on-off switch along with the change of burthen of evaporator, which is a main characteristic of the central refrigeration system model.
集中供冷系统仿真数学模型的主要特点是压缩机可以根据蒸发器总负荷大小选择性开关不同的档位，相应的输入输出参数也随之改变。
The locomotion equation and dynamics calculation model of the compressor are analyzed.
分析了该种压缩机的运动方程及动力计算模型。
The model consists of component models including the compressor, shell and tube condenser, expansion valve and flooded evaporator.
模型由压缩机、壳管式冷凝器、膨胀阀以及满液式蒸发器等一系列部件模型组成。
General motion low of back-pressure ports position is developed by solving thermodynamic model of compressor and carrying out dynamical computation.
通过求解压缩机热力学模型和进行动力计算，分析了背压孔的一般运动规律。
The system model comprises the dynamic heat exchanger model based on the lumped parameter method and moving phase boundary method, and the stable flow models of compressor and expansion valve.
系统模型中包含了用集总参数和相移动边界法建立的热交换器动态模型，以及压缩机和膨胀阀的稳态流动模型。
It is very important to describe the performance curves of centrifugal compressor by mathematical model accurately for the automatization design and management of gas transmission trunk line.
对于输气干线的自动化设计和管理来说，用准确的数学模型描述离心压缩机的特性曲线至关重要。
Experiment on compressor has proved that this model is feasible and has a high forecasting precision.
对压缩机的故障预测实验表明，该模型具有明显的预测可靠性。
The model includes sub models for key components, such as non economized compressor, economized compressor, economizer, expansion valve, shell and tube condenser, and flooded evaporator.
模型由一系列部件模型组成，包括压缩机、经济器、膨胀阀、壳管式冷凝器以及满液式蒸发器。
A model of a gas engine driven air to water heat pump based on the measured data of the gas engine and compressor was established.
以某发动机和压缩机的实测数据为依据，对一燃气机驱动空气-水热泵机组建立了模型。
The dynamics of the Variable displacement compressor is studied, and analytical model for evaluating the dynamic behaviour of the compressor is outlined.
研究了变容量摆盘压缩机的动力学，并建立了用于分析变容量压缩机构动力特性的解析模型。
In this paper, the method of annually costs is used to found the collective optimization model including gas transportation pipeline optimum design and compressor station optimum operation.
本文采用年值法建立了包含输气干线优化设计和压缩机站优化运行的综合优化模型，这两个模型分别属于混合离散优化和组合优化。
It is shown that the model in this paper reflects the dynamic working variety of the compressor, and it is similar to the fact of the rotary vane compressor.
结果表明，本文所建立的模型能很好的反映压缩机工作过程的动态变化，与压缩机实际工作过程基本一致。
In this paper, the vibration mechanic at model for a no-base, V-type positon air compressor is deduced, some elementary problems of design and calculation of damping system are expounded.
本文导出了无基础V型活塞式空气压缩机振动的力学模型，阐述了减振系统设计计算的基本问题。
A stage by stage mathematical model of the compressor in a turbojet engine is developed based on the control volume theory.
根据控制体理论，建立了涡喷发动机中压气机的逐级数学模型。
A novel forecasting model for compressor casing wall pressure based on phase space reconstruction and radial basis function network was established.
建立了基于相空间重构和径向基神经网络的压气机机匣静压的预测模型。
A new three-dimensional aerodynamic stability model for an axial flow compressor to study the effects of radial disturbance on the rotating stall is presented.
给出了考虑压气机径向扰动对失速影响的轴流压气机三维气动稳定性模型。
But the natural gas will be oil absorption, oil viscosity is reduced, so choose oil viscosity brand than general same model, the same pressure air compressor fuel the viscosity of the brand to higher.
但天然气会被油吸收，使油的粘度降低，因此选用油的粘度牌号一般要比相同型号，同等压力的空气压缩机所用油的粘度牌号要更高些。
Finally, the total loss distribution along the blade span of the axial flow compressor is estimated according to an improved end wall loss model and a shock loss model.
再应用改进了的端壁损失和激波损失模型，最终算出轴流压气机设计点损失沿叶高的分布规律。
At last, the author proposed a new vortex model for the compressor cascades.
最后提出了新的压气机平面叶栅内的旋涡模型。
The compressor wheel is a core part of turbocharger, and the low-cycle-fatigue (LCF) dam - age is its main fault model.
作为涡轮增压器的核心零件，压气机叶轮主要失效模式是低周疲劳破坏。
The method is introduced to develop mathematical model of gas turbine, centrifugal compressor and gas transmission pipeline needed for load assignment optimization.
介绍了建立优化调度所需的燃气轮机、离心压缩机和输气管线模型的方法。
This paper used time series method to analyze the vibration faults of working compressor, and the time series model of vibration signal was setup in the paper.
本文运用时间序列方法研究工作状态下回转式压缩机的振动故障。
Another application of stage-by-stage model is to investigate the post-stall behavior in the compression system which consists of one compressor and one combustion chamber.
逐级模型的另一种用途是用来研究压缩系统的过失速行为，本文研究了由压气机和主燃烧室组成的压缩系统。
应用推荐