Patterns of applications or overall design techniques that can be used to structure your entire composite application or suite of composite applications.
定义应用程序或整体设计方式的模式，可用于构建整个复合应用程序或复合应用程序套件。
It is meaningful for the corresponding research of composite material structure design and engineering application.
它对复合材料结构设计的相应研究和工程应用具有一定的意义。
So thorough comprehension of the hybrid structure performance is beneficial to new type composite structures and new design concept.
因此，深入理解符合结构的这些特性，有利于开发新的组合结构形式并建立新的设计概念。
Light weight and high stiffness composite material barrel can be obtained by a structure optimal design.
通过结构优化设计可以获得重量轻刚度好的复合材料火炮身管。
Some fundamental ideas and methods about the control design theory of composite structure systems are expounded in this paper.
本文阐述了组合结构系统控制设计理论的某些基本思想和方法。
Composite films fracture load can be calculated with plus theorem based on the load of base material when design the structure of the composite material.
在设计复合材料结构时，可以在基材的负载基础上，根据叠加法则推算出复合膜的破坏载荷。
A discrete variable structure composite control strategy which use an equality form of the reaching condition is proposed and applied to design the load_frequency controller.
提出了一种等式到达条件下的离散变结构组合控制策略，设计了基于该控制策略的负载频率控制器。
The paper introduces the design process of optical fiber composite ground wires (OPGW) in the light of structure type selection, heat stability, mechanics calculation and the kit fittings.
介绍了OPGW光纤复合架空地线的设计过程，并从OPGW的结构选型、热稳定、力学计算以及配套金具等几个方面进行了阐述。
An introduction to virtually all aspects of the technology of composite materials as used in aeronautical design and structure.
对几乎所有的在航空设计和结构用复合材料技术方面的介绍。
This paper described work principle and structure design of side cut punch composite mold and assembly testing requirements using the crank press machine.
介绍了在曲柄压力机上切边冲孔的复合模结构设计、工作原理及装配和调试要求等。
Here presented a new multilevel optimization procedure for minimum weight design of composite structure.
本文提出复合材料结构优化设计的一种新的多级优化设计方法。
Design of flutter model from aircraft metal structure to composite structure can be achieved by equation of stiffness, yet it may cost much time for general design method.
金属飞机结构到复合材料结构的颤振模型设计，要求采用刚度等代法来完成，然而一般的设计方法通常需要消耗大量时间。
The structures of plane distribution composite die are introduced. The design needs and structure factors of plane distribution composite die are analysed.
介绍铝合金挤压型材平面分流组合模结构，系统地分析了平面分流组合模各结构要素及设计要求。
Based on the continuous girder bridge completed conventional design on the basis of content, a more detailed analysis of the composite structure in the design of the bridge four key issues.
本文在结束连续梁桥向例设计实质的根底上，较仔细地分析了组合结构桥梁设计中的四个关键问题。
In this paper, a composite domain topology optimization (CDTO) method is proposed to control the distribution of different amount of material in the design sub-domain of structure.
提出一种复合域拓扑优化方法以控制结构设计子域的不同材料数量分布。
The design of structure and dynamics of a rotor blade is based on its section characteristic of composite blade.
复合材料桨叶剖面特性是旋翼桨叶设计的最基本原始参数，也是桨叶结构设计、动力学设计和结构分析的基础。
Based on this, this article has carried on the discussion to the underground composite construction dynamic performance and the underground structure design method, the main content is as follows.
基于此，本文对地下复合结构的动力计算方法和地下复合结构的动力特性进行了探讨，主要内容如下。
Prestressed composite concrete beam with encased H-steel is one of the structural design forms for the outer-jacketing structure for adding story.
内置H型钢混凝土组合结构是实现套建增层的结构设计形式之一。
The conclusion can be used to provide direction for the choice of composite sleeve material, the design of built-up method and the roll structure.
可用于指导复合轧辊材质选择、热装方法的制定和轧辊结构设计。
In this paper the author discusses the materials, the structure and the forming technics of the composite easy pull_top and presents a new type of design for a machine used to form the pull_top.
本文探讨了复合易拉盖的材料、结构和成型工艺。给出了一种复合易拉盖成型机的设计方案。
This paper introduced the way of using design composite material, designed and calculated its strengthen structure and made its mathematics model of strengthen structure.
本文利用复合材料强度设计的方法，对其强化结构进行了设计计算，建立了纤维增强定向成型材强化结构模型。
In this paper the design and analysis of composite floor structure in the boiler workshop which belongs to the 3rd enlargement to Mudanjiang 2nd Electrical Power Plant are presented.
本文介绍了牡丹江第二发电厂三期扩建工程锅炉运转层组合楼盖结构的设计与分析。
The related theory and application of bearing - load composite joints are briefly reviewed, including design basis. structure. strength analysis. related testing and so on.
介绍复合材料承力接头设计的相关理论及应用状况，包括设计基础、结构形式、强度分析、相关试验等。
The structure design of load-carrying frames of heavy-duty cars is the key technique in the design of heavy-duty cars, and is also a creativity of the composite heavy-duty cars.
长大货物车的承载框架结构设计，是长大货物车设计中的关键技术问题，也是组合式长大货物车的一种创意。
Include choice of scheme, support system design of soil-nailing wall and anchor-pile composite supporting structure, excavate and monitor measurement in excavation engineering.
主要包括方案的选择，土钉墙与桩锚结合支护结构的支护体系设计，基坑开挖及监控测量。
The article introduces the design frame, equipment composite, structure, features, working theory and key technique. It also analyzes the importance of developing this equipment.
文章介绍了畜禽废弃物处理成套设备的设计构思、设备组成、结构特点、工作原理和关键技术，分析了开发该设备的重要性。
The steel reinforced concrete composite frame structure is chosen in the structural design of Shenzhen Huarong Mansion, because some beams are too long and the height of beams are limited.
深圳华融大厦的框架筒体结构采用型钢混凝土混合结构框架，可以解决跨度大、梁高受限的问题。
To the grafting on the surface of hollow fiber, the new type of design for composite membrane structure be advance.
对于中空纤维膜表面接枝改性，提出了疏松型复合膜织构新设计。
According to the actual converter structure size in Chongqing Steel works and the characteristics of modified design, the cold model of composite blown converter was built.
根据重庆钢铁股份公司复吹转炉生产过程中实际结构尺寸和改造设计的特点，设计制作了复吹转炉冷态模型。
According to the actual converter structure size in Chongqing Steel works and the characteristics of modified design, the cold model of composite blown converter was built.
根据重庆钢铁股份公司复吹转炉生产过程中实际结构尺寸和改造设计的特点，设计制作了复吹转炉冷态模型。
应用推荐