A motion block compensation algorithm based on characters of pixel is proposed in this paper.
提出一种基于像素特征的运动块补偿算法。
However this compensation algorithm tries to modify the bias from the results but not the essence.
这种补偿算法是在已经出现偏差的基础上进行修正，而没有从本质上去分析问题解决问题。
As to motion compensation module, bi-directional compensation algorithm is used. The precision is half pixel.
对于运动补偿模块采用双向补偿的算法，补偿精度为半像素。
For binary phase-coded signal sensitive to Doppler frequence, a new compensation algorithm is introduced in this paper.
二相码信号广泛地应用于雷达系统，文中针对其对多普勒频率敏感的问题提出了一种补偿算法。
Simultaneously, the strategy of fault recovery of neural networks is studied and a fault compensation algorithm is given.
同时，本文对神经网络的故障恢复策略进行了研究，提出了相应的补偿算法。
An intensity compensation algorithm is studied to increase the precision and linear range of optical fiber sensors further.
为进一步提高光纤传感器的测量精度和线性范围，本文还研究了光强补偿算法。
Finally, the experimental results prove that the measurement scheme and the compensation algorithm are feasible and reasonable.
实验结果证明了测量方案和加速度补偿算法的可行性。
The 1-d range profiles motion compensation algorithm is discussed in the simple and complicated target environment in LFMCW radar.
研究并提出了简单和复杂目标环境中LFMCW雷达中一维距离像运动补偿算法。
It consists of a power compensation algorithm based on reverse channel prediction and a common closed -loop power control algorithm.
它由基于反向信道预测的功率补偿算法和常规闭环功率控制组合而成。
The software of the circuit board and compensation algorithm is developed on the basis of the actual operating conditions and manuals.
根据实际作业情况与操作手册，开发了电路板的控制软件，补偿控制算法也由软件来实现。
A novel radiometric compensation algorithm is proposed to correct the color distortions of the projection display on patterned surface.
提出了一种用于校正带图案表面投影显示颜色失真的辐射度补偿新算法。
This paper sums up the advantages and deficiencies of two algorithms, and design a new tool radius compensation algorithm based on this.
总结出这两种算法的优点及不足之处，并在此基础上设计了一种新的刀具半径补偿算法。
We present two kinds of tool radius compensation algorithm in-depth study, base on the basis of the design at home and abroad CNC system.
本文在借鉴国内外数控系统设计的基础上，对现有的两种刀具半径补偿算法进行了深入的研究。
A temperature compensation algorithm according to the behavior of the inductance sensor, and a nonlinear compensation algorithm are designed.
提出了利用传感元件自身特性实现温度补偿的算法以及对系统非线性补偿的算法。
Finally, through analysis a large number of experiments, it have been verified the effectiveness and credibility of the compensation algorithm.
最后通过大量试验分析，验证了补偿算法的有效性和可信性。
Then two conventional envelope migration compensation algorithm was introduced, on this basis, a new algorithm called frequency domain correction was proposed.
接着介绍了两种常规的包络走动补偿算法，在此基础上提出了一种新的算法称之为基于频域校正的包络补偿算法。
Secondly, aiming at losing balance between the CW and CCW rotation speed, a balancing compensation algorithm is put forward, and which is implemented with hardware.
其次，针对行波型超声电机的正向和反向速度特性不一致的情况，提出一种正、反向速度平衡补偿算法，并用硬件实现了平衡补偿控制器。
One novel gaze point compensation algorithm in Riemannian space was proposed in this paper based on the estimation algorithm of gaze point in space similar triangles.
在空间相似三角形注视点估计算法的基础上，提出一种基于黎曼几何的视线落点补偿方法 。
Further improvement is made for the channel compensation algorithm on the base of channel clustering method, with the result of optimizing the compensation performance.
在其基础上，本文对通道补偿算法进行了进一步的优化，大幅度的改进了补偿性能。
The amplitude-phase compensation model of multi-band radar signal fusion is analyzed and the new amplitude-phase compensation algorithm based on the ESPRIT is presented.
分析了多雷达信号融合中的幅度相位模型，并基于旋转不变技术提出一种新的幅度相位补偿参数估计方法。
The combination of cascaded frequency dispersive compensation algorithm with restrainedamplitude compensation algorithm results in a new routine inverse Q filtering method.
而将串联频散补偿算法与限幅补偿算法相结合，可形成一种新的常规反Q滤波方法。
The experiments results proved the validity of background motion compensation algorithm and the feasibility of object-detecting based on the background motion compensation.
仿真实验的结果验证了运动背景补偿算法的有效性，以及运动背景下基于运动补偿的目标检测的可行性。
Considering the direct angular velocity signal output from fibre optic gyroscope, a novel coning compensation algorithm was introduced and it need input angular velocity signal.
鉴于光纤陀螺角速率信号可以直接获取，提出了一种以角速率信号作为圆锥补偿算法输入的新补偿算法。
In this paper, the mechanism of harmonic increments caused by device characteristics are analyzed in detail, and the compensation algorithm of a forward voltage drop is proposed.
该文详细分析了由器件特性引起的谐波增大的机理，提出了管压降补偿的方法。
In studying the pulse measurement, dynamic error is produced, mainly by acceleration. A compensation algorithm for acceleration is advanced based on the theoretical dynamic model.
针对脉冲推力测量过程中所产生的误差，提出了一种基于理论动力学模型的加速度补偿算法。
The design of a magnetic heading measurement system is introduced. The error sources which affect heading accuracy and the problems of current compensation algorithm are discussed.
介绍了磁航向测量系统的设计，分析了影响磁航向精度的误差来源及目前磁航向误差补偿算法存在的问题。
To eliminate the influence of distributed capacitance on negative sequence directional pilot protection, the authors propose a Bergeron model based accurate compensation algorithm.
为消除特高压输电线路中分布电容对负序方向纵联保护的影响，文章提出一种基于贝瑞隆模型的精确补偿算法。
The gain error compensation algorithm is proposed to reduce gain error, and moreover fuzzy compensation replacing gain compensation is used to improve the robustness of the system.
对此提出误差增益补偿算法以减小增益误差，并进一步用模糊补偿替代增益补偿以提高系统的鲁棒性。
The gain error compensation algorithm is proposed to reduce gain error, and moreover fuzzy compensation replacing gain compensation is used to improve the robustness of the system.
对此提出误差增益补偿算法以减小增益误差，并进一步用模糊补偿替代增益补偿以提高系统的鲁棒性。
应用推荐