This paper used the finite element method to compute the temperature field, and combined finite element with analytic solution to develop a calculation of thermal stresses.
本文采用有限元数值分析方法计算多层圆管的温度场，并把解析解与有限元相结合，提出一种求解其热应力的计算方法。
In this master thesis, the stress-strain relationships of thin films were measured by nanoindentation combined with dimensional analysis and finite element method.
本文以纳米压痕法结合量纲分析及有限元方法来测量薄膜材料的应力-应变关系。
Finite element method is used to build up element stiffness matrix and element mass matrix. After the combined total stiffness matrix and the total mass matrix are obtained.
采用有限元法建立不同管道元件的单元刚度矩阵和单元质量矩阵，最终形成管道结构的总刚度矩阵和总质量矩阵。
The Monte Carlo method combined with the elastoplastic finite element method (FEM) is proposed to analyze the slope stability problems.
蒙特卡洛随机搜索法与弹塑性有限元法结合，求解边坡稳定问题。
Finite element analysis program was used to calculate the stress of 300mw turbine rotor in straightening the axle, and the effect of each factor is analyzed combined with the trial result.
应用有限元分析程序对300MW汽轮机转子直轴进行了应力计算，并对各影响因素进行了分析，结果表明退火处理过程中残余应力产生的塑性变形量不可忽略。
A modification method based on the combined universal finite element program and mathematic software for finite element model of long span bridge is proposed.
提出一种通用有限元程序和数学软件相结合的大跨度桥梁有限元模型修正方法。
A finite element method using subregion variational principle and spline function in this paper is presented to solve the problem of combined shell of revolution.
本文提出一种用分区变分原理和样条函数相结合的有限元方法，解决组合型旋转壳受力分析问题。
The above-mentioned methods are combined to optimize the field of the breaker, and the calculation results are compared with the results calculated by finite element method.
本文将上述方法结合起来对断路器的电场进行优化计算。并将计算结果与有限元法的计算结果进行了分析比较。
And then obtained the modification model of sensor shell with sufficient accuracy by adopting the combined modeling method of experimental modality analysis and finite element modeling.
然后采用实验模态分析和有限元建模相结合的建模方法，获得了足够精度的传感器壳修正模型。
Remote field eddy current technique combined with computer technique and finite element analysis was used to examine the inservice ferromagnetic heat exchanger tubing.
远场涡流技术结合计算机技术和有限元分析方法，解决了在役铁磁性材料换热器管检验的问题。
A local transmitting boundary is combined with a lumped-mass finite element technique to form a mechanical model simulating the near field steady wave motion.
本文将局部透射边界和集中质量有限元技术结合起来形成一个模拟稳态近场波动的力学模型。
The experimental results were used to calculate material properties, using the finite element method combined with optimization techniques.
该方法根据实测的客观物理量集成运用有限元方法和优化技术来测算材料的弹性参数。
This paper uses the combined finite-discrete element method with smeared rotating crack model to analyze the seismic rupture process simulation of concrete gravity dam under the action of earthquake.
应用联合有限-离散元法结合弥散式旋转裂缝模型分析了地震作用下混凝土重力坝动力破坏过程。
Based on reliability theory, combined with finite element method for structure optimization, the lightweight design for the lower arm of a suspension is conducted.
基于可靠性理论，结合有限元结构优化方法进行某悬架下摆臂的轻量化设计。
A combined iteration method for load identification is proposed to analyze the nonlinear dynamical system by joining finite element method with active control method.
针对一类非线性系统提出了一种新的载荷识别方法，组合迭代法。
A finite element model of large combined tubular reactor with complicate structure and loads was built up.
对结构和所受载荷都非常复杂的某大型组合管式反应塔建立了有限元模型。
The finite element method is combined with homogenization theory based on asymptotic expansion for predicting effective properties of polymer matrix composites toughened and strengthened by particles.
将数学上的均匀化方法与有限元法相结合，预测了颗粒增韧增强聚合物基复合材料的有效性能。
Combined with the finite element method, the semi-analytical numerical method presented can be used to analyze thick composite laminates with arbitrary boundary conditions and geometrical shapes.
进一步和有限元法相结合，得到了能够分析具有任意边界条件和几何形状的复合材料叠层厚板的半解析数值方法即哈密顿单元方法。
In this paper, a discrete local transmitting boundary is combined with a lumped-mass finite element technique for simulating steady wave motion in the viscoelastic layered medium.
本文将离散的局部透射边界与集中质量有限元方法相结合，用于模拟粘弹性成层介质中的稳态波动。
Objective:To conduct such a study on TSS downstream of mitral stenosis using a finite element model of two dimensions combined with Doppler echocardiography in human beings.
目的探讨一种与多普勒超声相结合的人体二尖瓣狭窄下游湍流剪应力二维有限元分析方法。
The combined hybrid finite element method (CHFEM) is of the mechanism of enhancing coarse-mesh accuracy of conventional displacement elements.
组合杂交有限元法（CHFEM）具有增强低阶位移格式粗网格精度的内在机制。
This paper uses inverse finite element method combined with forward finite element method to design blank of automobile panel, and proves its rationality by physical simulation.
本文采用有限元逆向法和正向法结合的方法，确定覆盖件零件的成形毛坯，并用物理实验验证了其合理性。
According to practical working situation, nonlinear dynamic finite element method is adopted to establish a numerical model of combined breaking rock with high pressure water jet and mechanical bit.
采用非线性动态有限元法，结合实际工况条件，建立了高压水射流—机械齿联合破岩的数值模型。
The interaction between two parallel cracks in rock mass under the combined action of tension and shearing is analyzed by finite element method.
采用有限元法，对岩体在拉剪综合作用下平行双裂纹相互影响的情况进行了计算。
Combined with general four-node element around crack tip element, a new hybrid finite element method to study stress intensity factors for interfacial crack is introduced.
与四节点单元相结合，由此提出了一种新的求解应力强度因子的杂交元法。
Combined model on the basis of the Finite Element Method and Multisurface Function was used to improve approximating precision and reliability in modelling abnormal height surface.
应用有限元法与多面函数法的加权综合模型改进拟合模型在逼近高程异常曲面时的拟合效果。
This paper, combined with the task of the FMS fixture design, describes the application of Finite Element Method in the fixture design, in addition the application results are also presented.
本文结合FMS夹具设计任务，介绍了有限元法在夹具设计中应用的方法和所取得的结果。
In this paper, the component mode synthesis, combined with the perturbation and stochastic finite element, is used to study the random eigen problem of large and complicated structures.
采用子结构模态综合和摄动随机有限元相结合求解工程结构的随机特征问题。
In this paper the finite element method is combined with optimization. The strengthening optimization is put forward on the basis of the limit analyse method of pressure vessel strengthening design.
将有限元应力分析方法与优化设计方法相结合，提出了基于受压容器开口补强的极限分析理论和优化设计思想。
In this paper the finite element method is combined with optimization. The strengthening optimization is put forward on the basis of the limit analyse method of pressure vessel strengthening design.
将有限元应力分析方法与优化设计方法相结合，提出了基于受压容器开口补强的极限分析理论和优化设计思想。
应用推荐