At the global coordinate system, the flight velocity and flight Angle of all the fragments are calculated with program.
在全局坐标系下，对所有破片的飞散速度和飞散角度进行了编程计算。
Now, to convert this to a statically initialized array, you would remove the first part of the program and replace it with something like this, calculated by hand
现在，要将这些结果转换成一个静态初始化的数组，我们需要删除这个程序的前半部分，并将其替换成手工计算出来的结果，如下所示
At last, a example was calculated using this articles program, and compared with the actual measurement result.
最后，利用本文的程序对浙医一院医技楼基础进行了分析，并与实测结果进行了比较。
These exposure estimates were calculated with a field strength prediction program.
这些电磁场的暴露估计由一种场强度预测程序来计算。
With hemispherical EFP simulation model, the penetration process of EFP that satisfies the simulation ratio are calculated using explicit finite element program LS-DYNA in this paper.
在此基础上以球缺型爆炸成型弹丸为计算模型，应用显式有限元程序LS-DYNA对满足模拟比的爆炸成型弹丸侵彻钢靶的过程进行了数值模拟。
Finally this environmental geotechnical problem is analyzed and evaluated by the program, the calculated result accords well with the surveyed.
最后，对该环境岩土工程问题进行了分析和评价，计算结果与实测结果符合较好。
The resonant frequency and unload quality factor are calculated accurately and the program with FORTRAN language is worked out.
编制了计算程序，精确地算出了微波腔体的谐振频率和无载品质因数。
The three dimensional flow field of the step cylinder in Hydraulic Control Rod Driving System (HCRDS) is calculated and analyzed with the computational fluid (dynamics) program CFX5 in detail.
应用计算流体力学程序CFX5对水力驱动控制棒步进缸内部的三维流场进行了计算和分析。
According to this can be compiled general program and has been calculated unsteady temperature history for any thrust chamber with radiation cooling.
据此编制通用程序，可以计算任意辐射冷却推力室的不稳定温度场。
The temperature field with phase transformation and non-linear surface heat-transfer coefficient of steel 1045 during quenching is calculated with ANSYS program.
应用有限元分析软件ANSYS计算了1045钢淬火时具有相变和非线性表面换热系数的温度场。
A simulative calculation was conducted of the natural frequencies of the frame towers using large-scale finite element program ANSYS, and the calculated value was compared with the test value.
利用大型有限单元程序ANSYS对框架塔的自振频率进行了模拟计算，并将计算值与试验值进行了对比。
The stage combustion cycle using the liquid oxygen and methane as propellant is calculated with the program, and the calculation results are also given.
本文给出了用该程序对采用液氧、丙烷作为推进剂的分级燃烧循环进行计算的结果。
Ion sputtering yields on t? Ti target are numerically calculated with TRIM program.
应用TRIM程序模拟了离子在氚钛靶上的溅射产额。
The calculated stress curve is in correspondenee with the results obtained from test, thereby the reliability of this program is proven.
计算的应力曲线与实测结果吻合，从而证实了使用该程序的可靠性。
The calculated results are in good agreement with the data of the experimental measurement and with those of the general computer program.
计算结果同普通程序的计算和实测值吻合良好。
Temperature field of 7050 aluminum alloy during its cryogenic treatment is calculated with ANSYS program.
应用有限元分析软件ANSYS计算了7050铝合金深冷处理时的温度场。
By using MARC program, the dynamic finite element analytic model of the first platform with bucket foundation in China is established and its elastoplastic seismic time-history response is calculated.
利用MARC程序作为平台，建立了滩海桶形基础平台整体有限元动力分析模型，并对我国第一座桶形基础平台进行了三维弹塑性地震时程动力分析，得到了一些很有用的结论。
With a general program of the3 D RBJE, this paper calculated the upper bound of the square base limit load on the center of the top surface of the square pillar.
文中用通用的二维刚体元程序计算了正方形柱体顶面中心区域作用方形基础载荷情况的上限解。
With a general program of the3 D RBJE, this paper calculated the upper bound of the square base limit load on the center of the top surface of the square pillar.
文中用通用的二维刚体元程序计算了正方形柱体顶面中心区域作用方形基础载荷情况的上限解。
应用推荐