The validity of the algorithm was verified by the results of computer simulation and experiments.
计算机模拟和实验结果证明了该算法的正确性。
This paper discussed the design of low cost experimental installations and their applications in the experiments on the study of computer control systems by physical simulation.
本文探讨“计算机控制系统”低成本实验装置的设计、制作及其在研究型实验中的应用，即物理仿真技术的应用。
The validity of half-scan mode was verified by the results of computer simulation and experiments.
计算机模拟和实验结果证明了该技术的正确性。
The author evaluated the output voltage drop owing to the commutative process and armature reaction in detail by means of the analysis of the existent system and the dynamic simulation experiments.
作者通过对实际系统的分析和动态模拟试验的验证，对其由于换相及电枢反应引起的输出电压降低作了较为详尽的、定量的分析。
The effects of element sulfur on carbon isotopic fractionation of methane have been systematically studied by the simulation experiments of thermal transformated methane from organic matter.
通过热模拟实验，系统研究了单质硫在有机质生成甲烷过程中对其碳同位素分馏的影响。
It is an important measurement to research soil and water conservation by artificial simulation of rainfall device in the indoor and field experiments.
利用人工模拟降雨装置进行室内与野外试验已成为水土保持研究的一个重要手段。
The correctness of theoretical deduction is invalidated by the experiments using optical simulation phantom of tissue.
利用组织光学液体模型模拟组织体，实验验证了理论推导的正确性。
Then under the MATLAB environment, author has done system simulation experiments by altering given value, changing controlled object characteristic and adding random disturbance.
在MATLAB环境下分别进行设定值改变、对象特性改变和加随机扰动三个环节的系统仿真实验。
This dissertation conduct fundamental research into several key issues of hermetic MEMS and optoelectronic devices by integrating theory, numerical simulation, and experiments.
本文采用理论、数值模拟、实验等方法系统的研究了MEMS和光电子器件气密封装工艺中的关键技术问题。
The experiments of simulation and application for actual MEMS device were done by proposed algorithms.
用已提出的算法，进行了模拟实验和应用在实际MEMS器件中的实验。
The robustness and effectiveness of the proposed algorithm are tested by a series of restoration experiments to recover the digital simulation and real turbulence-degraded images.
在微机上对数字模拟和实际退化图像进行了一系列恢复实验，验证了算法的有效性和稳健性。
It is evinced that these models are feasible by comparing the results of simulation and experiments.
模拟结果与实验结果的对比表明该数学模型是合理的。
Fatigue crack characteristics are investigated based on the dynamic response simulation by finite element and the dynamic response experiments for tensile-shear spot-welded specimens.
利用三维有限元模拟和动态响应试验对点焊接头疲劳裂纹萌生和扩展特性进行了研究。
The statement is supported by the numerical simulation experiments on facial database of ORL.
ORL人脸数据库的数值实验，验证了上述论断的正确性。
The deep drawing process of AZ31 magnesium alloy rectangular parts was researched by numerical simulation and experiments.
采用数值模拟和实验相结合的方法研究了AZ31镁合金板料分块压边力拉深矩形件的过程。
The simulation experiments show that the full aperture perforation rack which is manufactured by prepared special binder can meet the requirements of application.
多次模拟试验表明，使用研制的专用粘结剂生产的全通径射孔弹架完全满足使用要求。
The method is verified by the simulations of many typical chaotic systems. The period-1 orbits, period-2 orbits and period-4 orbits are obtained from the simulation experiments.
用该控制方法对多个典型混沌系统进行数字仿真实验，获得了稳定的周期1、周期2和周期4轨道。
By this model, simulation about speed regulation of 6105Q diesel engine is made. Based on the result of simulation, the control parameters are got by experiments.
利用该模型可分析各参数对发动机控制的影响进行仿真，并利用仿真的结果指导6105Q柴油机数字式电子调速器的参数整定实验。
As is full testified by the mechanical model which has been built and the physical simulation experiments.
所建立的力学模型和物理模拟实验，完全证明了这点。
The technique using thermal tensioning and trailing intense cooling simultaneously to reduce welding distortion was investigated by both numerical simulation and experiments.
对温差拉伸和随焊激冷配合使用控制铝合金薄板焊接变形的联合工艺进行了数值模拟和试验研究。
The ablation experiments of silica phenolic resin material eroded by highly concentrated particles were carried out by using the high acceleration ablation simulation test motor.
利用高过载模拟烧蚀实验发动机，开展了高浓度颗粒流冲刷条件下高硅氧酚醛材料烧蚀机理的实验研究。
By comparative analysis to the results of simulation and experiments, the turbulence model is tested and scientific validated.
通过模拟流场和试验流场的比较分析，对湍流模型进行了检验及验证。
Structures and place and number of molding gate have effect on molding shrinkage by analyzing results of simulation experiments, and have many laws.
通过模拟实验结果曲线的分析表明，塑件的结构特征及浇口位置与数量的变化，对塑件的成型收缩具有重要影响，并且有一定的规律可寻。
Solidification characteristics and microstructure of squeezing castings with large ratio of height to diameter have been investigated by numerical simulation and experiments.
铸件的凝固特性和组织直接影响铸件的力学性能，用计算机模拟和试验的方法研究了大高径比挤压铸件的凝固特性和凝固组织。
The small sample properties of the tests are investigated by Monte Carlo simulation experiments and real data is analyzed for illustration.
通过模拟试验研究了检验统计量的小样本性质，并进行了实际数据分析。
The optimum density of CNT cathode arrays was found by simulation, carried out by experiments.
本文通过模拟计算找出了最佳碳纳米管场发射阴极阵列密度，并通过实验进行了验证。
Stress distribution and moving characteristics are obtained through simulation when the wheel contacts with sand. The validity of simulation model is verified by experiments.
通过仿真得到车轮与沙土颗粒接触时的应力分布关系，以及运动特性关系，并通过实验验证仿真模型的正确性。
It is validated by experiments, simulation and theoretic calculation that the macroscopical circuit model of plasma load of AIP and its relationship with microcosmic parameters of plasma is effective.
通过实验、仿真模拟和理论计算，验证了建立的电弧离子镀等离子体负载的宏观电路模型及其与等离子体微观参数间的关系是有效的。
Experiments show that the new optimized partition algorithm can improve the parallel simulation performance compared with the ones partitioned by traditional graph partition algorithms.
实验表明，该优化划分方法相对于传统的图划分算法能够有效地提高模拟性能。
By lots of simulation experiments, it is proved that this method can feasibly and effectively improve the stability and precision.
经过大量的模拟实验证明，该方法是切实可行的，能有效地提高滤波的稳定性和精度。
应用推荐