但成纸的施胶度、抗张强度及表面强度受到影响。
However, the sizing degree, tensile strength and surface strength were damaged to some extent.
利用物理或者化学气相沉积镀膜,增加工件表面强度。
Making use of physical or chemical vapor deposition to accumulate to plate the film mutually and reinforces the surface of work strength.
氧化淀粉用作纸张的表面施胶剂可提高纸的表面强度。
Oxidized starch used in surface sizing can increase the surface strength of paper.
采用液体喷丸方法提高零件表面强度及抗应力腐蚀能力。
Wet spraying pellet was used to improve the surface' s strength and stress corrosion resistance of the workpiece.
静电复印纸应具有高白度、高挺度、纸面细腻和良好的表面强度等要求。
Electrostatic duplicating paper is required to show high whiteness, high stiffness and good surface strength.
浆内添加时有较好的增强、助留效果,用于表面施胶可明显提高纸张表面强度。
CMS has significant effect on strength and retention when it is used in the pulp; paper surface strength can be improved greatly when it is used as surface treatment size.
该模具具有成本较低、开发周期短、精度较高等优点,但表面强度和热效率较低。
The mould had merits such as low cost, short development cycle and high precision, while it had defects of low surface strength and thermal efficiency.
实心球塑料颜料在纸张表面强度、油墨吸收性、色偏方面要好于空心球塑料颜料。
However, solid bead works better in aspects of surface strength, ink absorptivity and color deviation.
由于黄河水的长距离搬运作用,颗粒磨圆度高、表面强度低;孔隙率高,毛细作用剧烈。
It has high psephicity, low surface strengths, high porosity and intensive capillarity because of the long transport function of the water.
涂料中胶粘剂的用量直接影响纸张的印刷表面强度、白度、不透明度、光泽度和吸收性。
The surface strength, brightness, opacity, glossiness, and absorbency are influenced by the amount of binder in the coating.
该产品在涂布纸的面涂涂料中应用,能明显增强涂布纸的表面强度,提高纸张涂布光泽度。
The product is applied in coating paper surface paint, can obviously strengthen the surface strength of the coating surface and improves paper coating glossiness.
对部分混凝土工程实例中表面强度偏低的原因进行分析,论述了粉煤灰对混凝土表面强度的影响。
This article analyzes the causes of the lower surface strength in some practical concrete projects, discusses the influence of fly ash on the concrete surface strength.
通过砂丸敲击工件表面,消除应力,增加工件表面强度,如弹簧、机加工刀具和飞机叶片等工件的表面处理。
Through the sand pill on the workpiece surface, eliminating stress, increase the surface strength, such as spring, machining tool and workpiece surface treatment such as plane blade.
结果表明经激光处理后,其表面强度满足了HT300用于一般零件对表面硬度、耐磨性等机械性能的要求。
The experimental results have shown that the hardness, wearability, strength of general components used HT300, and the results also provide a basis for improving the surface properties of components.
为了提高铝合金的表面强度,根据铜合金的液相分离性质,采用CO2激光熔覆方法在铝合金表面成功制备了铜基合金涂层。
According to the liquid separation property of Cu-base alloy, the Cu-base coating is obtained on the aluminum alloy by CO2 laser cladding for improving the surface strength of aluminum alloy.
表面自身纳米晶化能够显著提高钢铁材料的表面强度、硬度、耐磨和耐疲劳性能,在化学热处理和电化学防护方面展示了广阔的应用前景。
The properties including hardness, strength and wear-resistance of iron and steel after surface self-nanocrystallization can be improved. The application prospects of this techni…
当表面与射线垂直时,射线的强度最大。
When a surface is perpendicular to the rays, their intensity is at its maximum.
在地球表面,可以通过改变地球磁场强度来检测这些风暴。
At the Earth's surface, these tempests can be detected by changes in the strength of the Earth's magnetic field.
其表面的多角形组成部分对紫外光产生反应,映射太阳光线的方位和强度。
The polygonal segments of the surface react to ultra-violet light, mapping the position and intensity of solar rays.
套服的整个表面组成部分从头到脚都使用两层或更多的强化芳纶组件进行加固,以便在强度和轻便程度方面进行优化。
The entire front-facing portion of the suit is reinforced from head to toe with hardened composites of two or more aramids, optimized for strength and lightness.
在太阳表面,磁场强度必须强到能推开表面的等离子体,将温度较低太阳内部的暴露在外,形成一个太阳黑子。
For a sunspot to form on the solar surface, the magnetic field needs to attain a certain strength to push the surface plasma aside, exposing the solar interior as a cool spot — a sunspot.
比起地球表面上不到1高斯的的磁场强度这些磁场大的惊人。
These magnetic forces are monstrous when compared with the magnetic field strength of our planet — which measures in at less than 1 gauss at the Earth's surface.
这样可以极大地扩张其表面积,增加电荷负载,又不会降低材料的机械强度。
This massively increases their surface area and hence the charge they can hold, but without impairing the physical strength of the material.
碳纳米管有很多优点:强度高、可导电、并有巨大的表面积。
Carbon nanotubes have advantages: they're strong, conductive, and have large surface areas.
当所有颜色可见光波达到反射强度时,物体表面就呈现白色;当最红的光线被吸收时,反射的影像就带有青色的色调。
When all these visible wavelengths are strongly reflected, the surface looks white; when the reddest light is absorbed, the reflection takes on a cyan tinge.
这些盖由钢制成,以便具有足够的强度,并在密封表面装配有弹性部件。
These covers are constructed of steel for strength and fitted with elastomer components on the sealing surfaces.
描述强度的一种最简单方法是以表面硬度来表示。
One simple way of describing strength is in terms of surface hardness.
描述强度的一种最简单方法是以表面硬度来表示。
One simple way of describing strength is in terms of surface hardness.
应用推荐