因此，建议在实际工程中可用一年左右的试验数据确定的徐变特性参数来对结构进行分析和计算，就可保证足够的精度和准确性。
Therefore, it is proposed that creep parameters determined by test data in one year are adopted in practical engineering to assure a good precision in analysis and calculation of structures.
所建模型经复杂结构有限元方法分析，结果和试验相吻合，表明等效模型是合理的，方法是正确的。
Using complex structure finite element analysis, the theoretical prediction conforms with the experimental results very well, the equivalent model is reasonable, and the method is correct.
试验模态分析是识别机械结构系统固有特性的一种常用、有效的现代技术。
The test modal analysis is an effective means to identify the intrinsic attribute of a mechanical structure.
借助已有的水下爆炸理论，分析试验结果，总结了地基及结构振动的规律，指出二次振动现象与水中爆炸产生的气泡脉动有关。
According to the existing theories on underwater explosion and based on the analysis of experimental results, the laws of foundation and structure vibrations are summarized.
本文通过大型试验的研究，分析梁板结构截面的剪力滞效应，及翼缘板的有效分布宽度，为设计提供参考。
In the paper, spear lag of beam plated construction and effective distribution width of flange plate are analysed through model test and research. It provides a reference in design.
介绍对梁体进行的检测、荷载试验，以及对桥梁上部结构及开裂截面的实际受力状况的分析。
In this paper, the inspection, load tests for the beams and analysis of actual mechanical behavior of the superstructure and cracked sections thereof are presented.
通过对陶瓷过滤器脉冲反吹系统的性能的试验研究，分析了各结构参数和操作参数对反吹性能的影响，对了解脉冲反吹机理，开发新型、稳定的强力脉冲反吹技术具有重要意义。
Based on the experimental research of ceramic filter pulse jet cleaning system, the influence of the operation parameters and the structure parameters on the pulse jet performance is analyzed.
对磁传动技术在搅拌装置上的应用做了较为全面的论述，并通过对具体结构的分析和试验，获得并验证了具体的设计方法和计算公式。
The application of magnetic transmission technology in the agitating device is discussed, Some design methods and calculation formula are obtained by analysis and experiments.
试验结果表明：所建立的模型可以用来定量地分析各种结构和控制参数对喷油过程的影响。
Test results show that the model could be used to analyzing the effects of injecting process that were caused by all kinds of parameters.
并以此为基础，提出了一种基于试验数据分析和试验条件属性重要性的日光温室结构优化的方法。
According to that, the research put forward a new method for optimizing designing of greenhouses' structures completely based on the analysis of the tests data and the importance of the attribute.
本文主要介绍该制冷系统的结构设计、整机性能试验和结果分析。
The design, structure, performance tests and result analyses of the cryogenic system are described.
本论文主要针对大跨度箱形截面梁结构剪力滞效应和结构非线性抗震性能进行了较深入的理论分析和一定的试验对比研究。
In this dissertation, the shear lag effect for large span box-section beam structure and the structural nonlinear anti-seismic capability have been theoretically and experimentally investigated.
本文主要进行了一致性评判技术在直升机复合材料结构试验与分析中的应用研究。
This paper concentrates on the application research of consistency evaluation technique for the structural test and analysis used in composite material of helicopter.
通过结构理论计算分析，确定该桥静载试验方案，阐述试验准备、实施过程及所取得效果。
By analyzing the structural theory calculation, make sure the bridge dead load experiment plan, elaborate the experimental preparation, implementation process and the effect.
根据试验与分析结果，论述了这种结构的抗震性能。
According to the results of test and analysis, aseismic behavior of the structure are discussed.
试验模态分析是了解结构动特性的重要工具。
Test modal analysis is an important means for understanding dynamic characteristics of construction.
对吸附器结构参数进行了分析和试验研究。
The analysis and experimental study of an adsorber structural parameters have been conducted.
据此对一个飞机结构危险部位作了疲劳寿命分析和试验验证。
The analysis of fatigue life for one critical position of aircraft structure and test verification are carried out accordingly.
介绍了PW—200型转向架设计技术参数、结构特点、动力学计算和试验分析。
The designed technical parameters, structural characteristics, dynamics calculation and test analysis of the PW 200 type bogies are described.
根据试验分析结果，作者提出了一种电磁型高温超导磁浮模型车的结构。
At the end of the paper, the authors propose an electrical magnetic type HTSC maglev vehicle model based on the experimental results.
主要介绍了一种新型截面的钢结构构件的试验分析。
The experimental study of steel structural member with a new type of cross section is presented.
本文对钢筋混凝土巨型框架结构箱形节点抗震性能进行了试验研究及ANSYS程序有限元分析。
The seismic capacity of the box-shaped joint in the reinforced concrete mega-frame structure system is studied, and the finite element analysis is done with ANSYS .
应用正交试验设计全面分析结构主要参数对传感器的静、动特性的影响。
The influence of main structure parameters on static and dynamic characteristics is investigated comprehensively by using orthogonal test design.
介绍复合材料承力接头设计的相关理论及应用状况，包括设计基础、结构形式、强度分析、相关试验等。
The related theory and application of bearing - load composite joints are briefly reviewed, including design basis. structure. strength analysis. related testing and so on.
最后还给出了相应的表层组织结构分析和疲劳寿命试验结果。
At last, the corresponding analysis of surface structure and testing of fatigue life were given.
该文介绍了济南黄河三桥索塔锚固区水平受力性能试验模型的设计；通过有限元分析，对试验模型和实际结构的受力进行了比较。
The article introduces the design of level bearing performance experiment model for cable pylon anchorage zone of Yellow River No.
在反应堆1：10模型上进行了堆芯吊篮结构的空气和静水中模态分析试验，获得动态特性。
After having completed the model analysis of the pressurized water reactor (PWR) core barrel in an 1:10 model, the dynamic characteristics are obtained.
在反应堆1：10模型上进行了堆芯吊篮结构的空气和静水中模态分析试验，获得动态特性。
After having completed the model analysis of the pressurized water reactor (PWR) core barrel in anl: 10 model, the dynamic characteristics are obtained.
在反应堆1：10模型上进行了堆芯吊篮结构的空气和静水中模态分析试验，获得动态特性。
After having completed the model analysis of the pressurized water reactor (PWR) core barrel in anl: 10 model, the dynamic characteristics are obtained.
应用推荐