setup_arch还需要对闪存存储库、系统寄存器和其它特定设备执行内存映射。
The setup_arch also needs to perform any memory mappings for flash Banks, system registers, and other specific devices.
1962年的今天，黑人学生詹姆斯·梅雷迪思在密西西比州大学的第四次系统寄存器实验成功。
In 1962, black student James Meredith succeeded on his fourth try in registering for classes at the University of Mississippi.
当设置好这些数据结构，代码段以及系统寄存器之后，可以通过设置控制寄存器CR0的PE位(第0位)为1来进入保护模式。
With these data structures, code modules, and system registers initialized, the processor can be switched to protected mode by loading control register CR0 with a value that sets the PE flag (bit 0).
你可以设置一些寄存器，并发出一个系统调用指令(或中断)，并由陷阱处理程序直接调用内核代码。
You set some registers and issue a system call instruction (or an interrupt) and have the kernel code called directly from the trap handler.
对于调试来说，它是很有价值的，它允许调试器中断操作系统代码、并检查硬件寄存器。
It is useful for debugging purposes by letting the debugger break into operating system code and examining the hardware registers.
状态空间可能被认为是一个大向量空间，其每个基本元素跨越一个系统元素的可能状态(比方说内存寄存器或偏心角)。
The state space may be thought of as a big vector space with each basis element spanning the possible states of one system element (say a memory register or the CAM Angle).
很多设备都有配置寄存器，BIOS可以基于系统可写内存中的设置向其中写入合理或正确的值。
Many devices have configuration registers to which the BIOS can write reasonable or correct values, based on Settings located in the system's writeable memory.
为了进行调试可以记录处理器寄存器的日志，甚至进行修改——不会干扰系统。
Processor registers can be logged and even modified for debugging — without disruption to the system.
Oops(也称panic，慌张)消息包含系统错误的细节，如CPU寄存器的内容。
The Oops (or panic) message contains details of a system failure, such as the contents of CPU registers.
bph命令强制在支持硬件寄存器的系统上使用它。
The BPH command forces the use of a hardware register on systems that support it.
tb_orig_stamp：系统引导时tb寄存器的值。
设计能在Linux操作系统下工作的C2调试工具（然而这个任务需要C2调试说明书，比如寄存器映象和引用命令——如能提供帮助万分感激）
To prepare the C2 debugging tools working under Linux OS (however C2 debugging specifications, like register map and command reference, are needed for that task - any help is appreciated)
在来宾操作系统的驱动程序窥探内存和硬件寄存器时，软件存在于下面来仿真设备（参见图2）。
When the guest operating system's driver peeks and pokes at the memory and hardware registers, software exists underneath to emulate the device (see Figure 2).
在基于寄存器的系统上还有一个问题：系统采用寄存器而不是堆栈来向函数传递参数。
There is another problem on register-based systems where registers are used to pass parameters to functions rather than the stack. Consider the following example.
mcontext_t提供了有关在系统出问题时可以找到的所有寄存器值的数据；这些寄存器值可以作为信号发送给这个进程。
McOntext_t provides data about all the register values found in the system at the time of the fault; the register values will in turn be delivered to the process as a signal.
但是在基于寄存器的系统中，这个16进制的值会从一个整数寄存器中读取，而不是从浮点寄存器中读取。
But on a register-based system, the hexadecimal value is read from an integer register, not the floating point register.
高层次综合也叫行为级综合，其基本任务是完成数字系统行为描述到寄存器传输级（RTL）描述的转换。
The main task is translating the behavioral description of a digital system into the design of RTL(Register Transfer Level).
由于寄存器传输级(rtl)行为描述可以精确地确定数字系统的操作，所以寄存器传输级综合成为当前EDA行业的主流设计方法。
Because the behaviors of digital system can be described by register transfer level (RTL) behavior exactly, RTL synthesis becomes the mainstream design method in EDA domain.
并着重研究了系统的硬件设计，讨论了CPLD的时序控制、图像传感器的寄存器控制以及DSP芯片的硬件开发、软件实现、实验分析等等。
We put emphasis upon systemic hardware design, discuss the sequence control of CPLD, Register control of image sensor, and hardware exploiture, software realization, empirical analysis of DSPs, etc.
AD7711含有自测量校准、系统校准和后台校准选项，同时允许用户读取和写入片内校准寄存器。
The AD7711 contains self-measurement calibration, system calibration and background calibration options and also allows the user to read and write the on-chip calibration registers.
AD 7712还包含自校准、系统校准和后台校准选项，同时允许用户读取和写入片内校准寄存器。
The AD7712 also contains self-calibration, system calibration and background calibration options and also allows the user to read and to write the on-chip calibration registers.
通过设置TMC428内部参数寄存器和片内ram的值，可使TMC428能够同时控制三个步进电机，实现三轴控制系统。
To set the proper parameter of register and on-chip ram of TMC428, it can make TMC428 control three stepper motor in the same time, and realize three-axis control system.
虽然系统使用的US B控制芯片是飞利浦公司的ISP1362，但是除了控制寄存器的使用不同外，US B协议栈的实现却是相通的。
Although ISP1362 is employed as the USB control chip here, the protocol stack has the same structure besides the slight difference between the control registers when other chips used.
可用于全部数据类型的主要优点体现在系统编程过程中的任何结构，（包括硬件控制寄存器）都可用C 语言来表达。
The major advantage of this full set of data types is that any construction that arises in system programming, including hardware control registers, can be represented in C.
本文论述了应用可编程序控制器(plc)的移位寄存器对开关量控制系统的编程方法。
This paper discusses the programming method of applying shift register of programmable controller (PLC) for switching signals control system.
对实时红外atr系统的FPGA逻辑结构进行了研究，提出了一种以寄存器单元为控制核心的FPGA逻辑结构。
A logic structure of FPGA with registers unit as control kernel is proposed after studying the logic structure of FPGA of real time IR ATR system.
在系统中，用计算机软件替代了由缓冲寄存器、环形分配器、控制逻辑及正反转控制门组成的步进电机控制器。
In this system, computer software was used to replace stepping motor controller which consisted of buffer, annular allotter, control logic and control doors of clockwise and counterclockwise running.
上述工作是为了建立一个将寄存器传输级语言描述翻译成硬件逻辑图的自动逻辑综合系统。
The above work is intended to set up an automatic logic synthesis system to translate a register transfer level language descriptions into hardware logic diagrams.
本文介绍了一种使用非最长周期序列的非定长线性反馈移位寄存器作为数字系统内部测试生成器的方案，并给出了设计这种测试生成器的设计过程和算法。
In this paper, a scheme is presented, in which an infinite length's LFSR with non maximum cycle sequence is used as a built-in test generator in digital systems.
从设备的观点看，例如软盘控制器，它只能看见其控制寄存器所在的(ISA)空间的地址，不能看到系统主存。
From the point of view of the device, say the floppy disk controller, it will see only the address space that its control registers are in (ISA), and not the system memory.
应用推荐