阐明了开关式燃烧控制的实现方法。
退火炉的燃烧控制直接决定了镀锌板质量。
Combustion Control for Annealing Furnace is direct acting the Quality of Zinc Sheet.
燃烧控制是HCCI燃烧中最重要的问题。
Combustion control is the most important problem which should be resolved for HCCI combustion.
对复合自身预热烧嘴、脉冲燃烧控制技术进行了重点介绍。
The dual self-preheating burner and pulse burn control technology are emphatically introduced.
本文较全面地介绍了脉冲燃烧控制技术的原理和应用结果。
The theory and application effect is introduced in the paper.
并由此得出三种燃烧控制方法,重点是对供风系统调节方法的研究。
We can also then acquire three main methods of combustion system, especially the method of wind given system.
燃烧周期的自动调整,加快了负荷大幅变化时燃烧控制的响应速度。
The automatic adjust of burning cycle promotes response speed to burning control as the load with a big changing.
燃烧周期的自动调整,加快了负荷大幅变化时燃烧控制的响应速度。
Its automatic adjustment of burning cycle accelerates the response speed of burning control in accordance with remarkable load increases.
PLC在加热炉跟踪控制、燃烧控制等系统中表现出良好的控制性能。
The GE90-30 PLC was found to have good controlling performance in tracking the furnace system and controlling the burning process.
燃烧控制是实现窑炉优化控制的基础,而燃烧控制的核心是空燃比控制。
Realizing furnace optimum control is based on combustion control, and that combustion control key is air fuel ratio control.
炉子采用的PLC计算机控制及DCS系统实现最佳燃烧控制实可用靠。
The furnace was equipped with PLC computer control and DCS system in order to gain the best combustion.
主要介绍了炉温控制和近年来在连续退火炉中广泛应用的二次燃烧控制。
The furnace temperature control and the after-burning control widely-used for continuous annealer in late years are mainly described.
主要介绍了炉温控制和近年来在连续退火炉中广泛应用的二次燃烧控制。
Finally, Smith estimating and cascaded temperature control technology are applied to the furnace temperature control system.
整个燃烧控制的系统的控制品质都直接关系到整个机组的安全和经济运行。
The control quality of system of combustion control system is directly related to the safe and economic running of the power plant.
燃烧控制是实现均热炉群优化控制的基础,而燃烧控制的核心是空燃比控制。
The basis for realizing the optimizing control of soaking pits is combustion control, the key in which is to control the ratio of air to fuel.
燃烧控制是实际均热炉群优化控制的基础,而燃烧控制的核心是空燃比的控制。
The basis for realizing the optimizing control of soaking pits is combustion control, the key of which is to control the ratio of air to fuel.
大纯时延、煤种多变和蒸汽负荷频繁变化是链条炉难以进行良好燃烧控制的原因。
It is difficult to have good performance for chain boiler combustion control system due to large delay time, varying coal's quality and steam load.
为解决隧道式淬火炉炉温分布不均匀的问题,采用了高速调温烧嘴脉动燃烧控制技术。
In order to reach uniform temperature distribution in tunnel bogie hearth furnace, the technology of pulse firing control of high velocity burner with air diffusion is proposed.
将燃烧控制开关3kk手柄先向右转45度到扫气档,接触器2jlc接通鼓风机运转。
Put burning control switch 3kk hand lever turns right 45 degree to scavenging shelve, contactor 2jlc collects and then air blower works.
大量延时空载、煤种多变、蒸汽负荷频繁变化是链条锅炉难以进行良好燃烧控制的原因。
It is difficult to have good performances for chain boiler combustion control system due to much no-load time and variation of coals quality and steam load.
新型燃烧控制爆破的机理以及爆破系统的构成进行了研究。并且提出了工程实施办法及方案。
The mechanism of the new type of constitution of blasting system is studied, and the engineering enforcement methods and scheme as well are put forward.
这两款通用模糊控制器成本低、可靠性高,为锅炉燃烧控制等实际应用提供了合适的硬件平台。
These two universal fuzzy controllers are low - cost and highly reliable, and provide appropriate hardware platforms for practical application such as boil combustion control.
全炉膛火焰检测系统具有广阔的应用前景,图像检测和燃烧控制相结合是一个有价值的研究方向。
The furnace flame detection system has wide application foreground. It is a valuable researching direction on combining image processing and combustion control.
文章介绍了广钢步进式加热炉燃烧控制原理及实现策略,从生产实际的角度提出了解决问题的方案。
The paper introduces the principle and practice for GISE' s walking-beam furnace' s burning control and proposes the solution from the view of actual production.
燃烧控制是锅炉运行的一个重要环节,对提高锅炉运行的经济性、可靠性和安全性有着重要的意义。
Boiler combustion control is an important part of boiler's working, it has great significance in improving the economy, reliability and safety of boiler.
介绍了时序脉冲燃烧控制技术的工作原理,与常规比例燃烧进行了比较,分析了时序脉冲燃烧的优势。
The principle of sequence pulse combustion control is introduced. Compared with normal proportion combustion its superiority is analyzed.
从理论上证明了在脉动燃烧控制方式下,控制对象是带延迟的一阶惯性环节,以及影响稳态炉温波动的因素。
It proves that the subject with pulse-firing control system is an inertial system with delay, and analyses the factors affecting stability of the temperature.
加热炉燃烧控制技术,就是在各种燃烧工况条件下,找到合理的最佳空燃比,以提高炉温控制精度和加热速度。
The combustion control techniques for reheating furnace are in order to search the optimal air fuel ratio, to improve the control precision of the temperature and the velocity.
第一部分L 1级燃烧自动控制系统,其主要研究内容是如何以最快的响应速度完成以温度为目标的燃烧控制。
The main investigative content of L1 combustion control system is using fast response rate to achieve the aim temperature.
本文分析了燃烧控制系统中交叉限幅的偏置系数的设置及作用,对冶金行业用户改善燃烧控制技术有一定的参考价值。
This paper analyses the setting of the cross limit offsets and its effect. It would be useful to improve the performance of combustion control in the metallurgical plants.
应用推荐