酸化是油水井常用的增产增注措施。
Acidizing is common applied in stimulation in oil and water well.
可广泛应用于油水井增产增注工艺管柱上。
It can be extensively applied to tubing string for oil production technology.
讨论了胡状集胡五块油水井套管损坏的主要原因。
This paper discussed the main reason of casing damage for oil-water Wells in block Hu 5.
研究了地层的蠕变特性对油水井套管载荷的影响。
This paper discusses influences of formation creep features on the casing load of producers and injectors.
研究了树脂型固砂剂在中低温油水井中的固砂效果。
The sand consolidation effectiveness of resinous sand consolidation agents for oil and water Wells at middle low temperature is evaluated experimentally.
在中原油田,套管腐蚀损坏是油水井报废的主要原因。
Corrosion failure of casing in Zhongyuan oil field is a main factor that causes oil or water well abandoned.
油田油水井套管损坏是石油开发中遇到的一大技术难题。
Oil and water well casing damage in oil fields is a very difficult technology problem during petroleum development.
根据油田油水井堵底水的需要,设计了一种新型可取式桥塞。
In accordance with the need of bottom water shutoff for many oil and water Wells in oilfield, a new type removable bridge plug was designed.
对地层施加振动处理是消除地层堵塞增加油水井产量的有效方法。
Handling vibration to stratum is one of the effective methods to remove the plug near the well.
吉林油田加大油水井日常管理力度,积极抢上措施,提高油气产量。
Jilin Oilfield increase the daily management of the oil Wells, and actively trying to climb on measures to improve oil and gas production.
针对有亏空和没有亏空两种情况的油水井,分别采用不同的防砂方法。
According to shortfall and no shortfall oil or water well, methods of sand control were applied respectively.
小断块油田进入开发中后期后,大量的油水井因各种原因而长期关停。
A lot of oil or water Wells are shut in for a long time for various reasons in the middle-later developed period in minor block oilfields.
针对大庆油田油水井套管腐蚀渗漏日趋严重,研制了手镯阳极防腐套管。
We aim to tackle the corrosion leakage of the casing in oil and water Wells, and have developed the bracelet anode anti-corrosion casing.
介绍了油水井转向酸化技术实验研究的具体操作方法及所使用的专用仪器。
This paper introduces the operation method and instruments of the experimental study of the technique of oil and water Wells turning into acidizing.
针对油田油水井套管发生腐蚀渗漏的现象,分析了土壤腐蚀性的相关参数。
In view of the frequent occurrences of the casing corrosion in the oilfield, relevant parameters of the soil corrosion have been analyzed.
因出砂、套管垢沉积、落物、注灰等原因常造成钻杆卡钻,导致油水井报废。
Many reasons like out sand, deposition of case dirty, falling things and cement injection can cause the drill pipe sticking and the well abandoned.
该仪器的应用为油水井及注聚合物井的流量测试提供了更为有效的手段和方法。
Trie application offers more efficient means to measure flux of well and well with injection of polymer.
应用该软件对大庆油田聚合物注入区块部分油水井压力恢复曲线进行了实例研究。
Examples for some oil and water Wells in polymer flooding blocks of Daqing oil field are given.
急需采取有效的套管检测手段,查明原因,采取修复措施,使油水井恢复正常的生产。
The urgent need for effective detection of casing means of identifying the reasons, and to take measures to repair, oil Wells resume normal production.
文章介绍了一种用于已下套管的油水井重新测量其井身轨迹的动力调谐陀螺测井技术。
This paper introduces a kind of dynamical tuning gyroscopic logging technology to re survey the well body track in cased production and injection Wells.
为了深入研究套损机理,减少油水井套管的损坏,提出了新的多臂井径测井解释方法。
In order to study the theory of casing damage and reduce the casing damage of oil-water Wells, a new log analysis method of multi-armed caliper log is expounded.
而地层的这种变形恰恰是导致置于其中的油水井套管出现剪切和拉伸损坏的直接原因。
The results show that formation squeeze in a horizontal direction deformation, in the vertical direction of a cl…
油田油水井套管损坏问题是石油工程中的棘手难题,给油田开采带来了巨大的经济损失。
The casing damage of oil and water Wells is a puzzle in petroleum engineering, which results in enormous economic loss.
文中列举出油水井对应测试的分析实例,以此说明加强低渗透油藏注水井压力动态分析的必要性。
Some analysis examples of oil and water well test are given to show the necessary for analyzing water injection well test data.
油水井在进行了多次调剖堵水作业之后,常规的调剖堵水作业的堵剂使用量大而且增产效果不明显。
Oil Wells after a profile modification of construction, conventional water shutoff used large plugging agent and the effect is not obvious.
低渗透油层低的单井采油能力和吸水能力注定了低渗透油藏必须采用密井网和油水井数比低的井网。
Based on low productivity and injectivity of a well for low permeability reservoirs, close well pattern and well spacing must be performed.
采用多元时间序列分析的方法,对油水井动态特性进行了分析,建立了油井含水率的多因素预测模型。
Multivariate time series method is used to analyze the performance of oil production and injection Wells. A multi factor model for predicting the water cut in oil well is presented.
根据渗流力学、岩石力学、传热学、断裂力学知识,建立了油水井三维水力压裂模拟计算的数学模型。
According to the theory of fluid mechanics in porous media, rock mechanics, heat transferring and fracture mechanics, the mathematic model is established to characterize 3d hydraulic fracturing.
在油水井生产过程中,由于周围环境的影响,使套管发生变形、损坏和腐蚀,直接影响油田的正常生产。
In oil production, because of the influence of surrounding environment, case-pipes occur deformation, damage and corrosion which will affect regular production in an oilfield.
在油水井生产过程中,由于周围环境的影响,使套管发生变形、损坏和腐蚀,直接影响油田的正常生产。
In oil production, because of the influence of surrounding environment, case-pipes occur deformation, damage and corrosion which will affect regular production in an oilfield.
应用推荐