Working overtime increases your level of fatigue and decreases time spent with your family, making happiness and work family balance difficult to maintain.
加班会增加疲劳减少与家人在一起的时间，以至于很难保持快乐也难以平衡工作与家庭。
Not only do they keep your brain working right, they also allow it to relax and help to fight against mental fatigue.
它们不但可以帮助您的大脑正常工作，同时也能让大脑适时放松从而对抗思维疲劳。
"I certainly have more respect for doctors than before," says Ellen Pompeo. "I didn't realize the fatigue and pressure that most of them are working under all the time."
艾伦。旁派说：“我更加佩服医生了，以前没有想到医生总在疲劳和压力下工作，一旦疏忽意味着生命的结束。”
Another major problem is burnout - working all the time (or doing any activity all the time) can lead to stress and fatigue, and could make that activity less enjoyable.
再一个主要问题就是工作倦怠—不停地工作(或者一直参与某个活动而不消停)能够导致压力和疲劳，并使活动失去愉悦感。
Another major problem is burnout -working all the time (or doing any activity all the time) can lead to stress and fatigue, and could make that activity less enjoyable.
另一个重要的问题是精力耗尽——一直工作(或者一直做其他一些活动)会导致压力，疲劳，也会使这些活动并不是那么让人愉快。
Patient: I have felt flustered and fatigue, especially during working for three days.
我感觉心慌和疲乏，尤其是近三天工作时症状明显加重。
Work can be a double-edged sword, in that it can stimulate brain activity, but at the same time long working hours can cause fatigue and stress, which potentially damage cognitive functions.
工作是一把双刃剑，既能够刺激大脑活动，同时过长的工作时间也会导致疲劳和压力，并有可能损害认知功能。
Light handle allowed long time working without fatigue.
轻盈的手柄可长时间操作而不感疲劳。
Working pressure increases and urban the deterioration of the environment, make modern increasingly exhausted, and eat Chinese wolfberry is very suitable for used to eliminate fatigue.
工作压力的增大和城市环境的恶化，使现代人越来越怠倦不胜，而吃枸杞就非常适合用来消除疲劳。
The fatigue limit of condenser copper tube was reduced by working condition which aggravated the spread of crack.
冷凝器铜管的工作环境使疲劳极限大为降低，加剧了疲劳裂纹的扩展。
The results show that metallurgical defect is the main reason leading to early formation of fatigue crack under normal working stress.
认为，该曲轴材料的冶金缺陷是导致疲劳裂纹在正常工作应力下过早形成的原因。
By analyzing the working condition and failure mechanism of packing box, it is proved in theory that fretting fatigue results in the failure of packing box.
通过对填料盘工作状况和失效机制的理论分析，进而在理论上证明了填料盘的开裂是由于微动疲劳造成的。
Bearing contact fatigue failure of the working surface by means of alternating the role of stress arising from failure.
接触疲劳失效系指轴承工作表面受到交变应力的作用而产生失效。
We think that the method of estimating maximal pre-applied stress of the working bolt can provide a reference for preventing further fatigue fracture of boxter bolts.
认为用估算螺栓工作时的最大预紧应力的方法，对防止埋头螺栓疲劳断裂再次重复发生有一定的参考价值。
Taking over the concept and its constituent elements of "overwork", based on the fatigue and working status of laborers, this paper tries to build up an assessment system of overwork.
本文以过度劳动的内涵及其构成要件为基础，遵循劳动者的疲劳状态和工作状态两大维度构建过度劳动评定体系。
The static analysis, modal analysis, special condition analysis, transient analysis during its working process and fatigue analysis of the main frame were done.
然后做了某摩托车车架的静力分析、模态分析、特殊工况分析、工作过程瞬态分析和疲劳强度分析。
You'd better sleep off your fatigue after working.
你最好用睡觉来消除工作的疲劳。
Working too long, people will appear eye fatigue, car is no exception. Look at the daily maintenance and repair of the car lights...
工作时间太长，人会出现眼疲劳，汽车也不例外。下面一起看看汽车车灯日常的保养和维修。
In addition, the static analysis, modal analysis, transient analysis during its working process and fatigue analysis of the rear arm of the type of motorcycle were done.
另外还对该摩托车的后摆臂进行了静力分析、模态分析、工作过程瞬态分析和疲劳强度分析。
Working with hidden dangers and fatigue is prohibited;
禁止带隐患施工，疲劳施工；
Coiled tubing have relatively poor working conditions and complex force state. In the forms of failure, fatigue fracture failure is the larger proportion.
连续油管工作条件恶劣，受力状态复杂，失效形式中疲劳断裂所占比例较大。
This paper analyses the relation between fatigue life and imposed preload of high strength bolt usually used in construction engineering and locates optimum working range to apply preload to it.
分析了工程上常用的高强度螺栓的疲劳寿命与施加的预紧力之间的关系，找出施加预紧力的最佳范围。
Gives four working habits that will help prevent fatigue and worry.
告诉你四条能够帮助你避免疲劳与焦虑的工作习惯。
The stress-strain field of winder axle in various working conditions is analyzed and mechanics performance of stress concentration region is studied, which provides reference for its fatigue analysis.
本研究对各种工况下主轴的应力应变场进行数值模拟分析，并对主轴应力集中区域的力学性能进行了分析和研究，为进一步的疲劳分析提供了依据。
Mechanically fastened joints of composite materials are mainly components in aircraft structures, which need to be subjected to static loadings and fatigue loadings during working.
复合材料连接接头是复合材料航空结构中的主要部件，在工作过程中，要求能承受一定的静载荷及疲劳载荷，其损伤失效及疲劳寿命是设计人员关心的问题之一。
In order to ensure structural safety in the design working life, it is necessary to carry out integrity analysis of fatigue and to evaluate the degree of fatigue damage on the structure.
为了保证结构在设计寿命期内的安全使用，有必要对结构进行整体疲劳分析，评估其在设计年限内的疲劳损伤程度。
The residual stresses impacts the working performance and fatigue strength of parts.
已加工表面存在的残余应力影响工件的使用性能和疲劳强度。
Many of these incidences have been attributed to fatigue due to long working hours.
在这些安全事件中，多数是工作时数超长疲劳所至。
By analyzing operator's fatigue states under different working posture on assembly line, studys the fatigue threshold and working time rate of standing posture, sitting posture and alternate posture.
通过对流水线上操作人员在不同作业姿势下的疲劳分析，研究站姿、坐姿和站、坐交替三种姿势的疲劳时间阈值和劳动时间率。
By analyzing operator's fatigue states under different working posture on assembly line, studys the fatigue threshold and working time rate of standing posture, sitting posture and alternate posture.
通过对流水线上操作人员在不同作业姿势下的疲劳分析，研究站姿、坐姿和站、坐交替三种姿势的疲劳时间阈值和劳动时间率。
应用推荐