One arc furnace with capacity of 180 tons is under construction now.It will produce 1 million 300 thousand tons of steel a year. 600 employees are working here.It will be launched in spring 2012.
一个容量180吨的电弧炉正在建设中,它一年将生产一百三十万吨钢铁,有600个工人在这里工作,它将落成于2012年的春天。
This paper introduces the structure and working principle of LEM current sensors and their application in the development of inverters for arc welding.
本文介绍LEM电流传感器的结构,工作原理及其在弧焊逆变器研究中的应用。
The working principle, structure and parameters design of plasma arc generator for heat treatment are described. Experiment has shown that it has good effect on partial surface hardening.
论述了用于金属材料表面热处理的等离子弧发生器的工作原理、结构特点和参数设计。试验证明这种发生器对材料的表面局部硬化非常有效。
The article introduces the new structure and working principle of the three-roller arc machine, as well as the application to making buses semi-products.
介绍三辊滚弧机的新型结构及工作原理,以及在客车半成品件制作中的应用情况。
A new kind of high frequency arc striking device was presented here based on the analysis of traditional arc striking circuits. The working principle of the device was analyzed.
在分析传统引弧电路的基础上,提出了一种新型的高频引弧电路,并对其工作原理进行了分析。
The working profile of arc surfaced indexing CAM is quite difficult to be protracted by the conventional drafting method.
弧面分度凸轮的工作廓面很难用常规的制图方法绘制。
The working principle of the rotating arc sensor used in seam tracking is introduced.
介绍了旋转电弧传感器用于焊缝跟踪的工作原理。
Abstract: The working principle, structure and parameters design of plasma arc generator for heat treatment are described.
文摘:论述了用于金属材料表面热处理的等离子弧发生器的工作原理、结构特点和参数设计。
The electronic reactor and the short-circuit protecting circuit used in arc welding inverterare introduced, and their working principles are analyzed.
主要介绍了用于弧焊逆变器中的电子电抗器和短路保护电路,并对其工作原理进行了分析。
Firstly, based on analysis of arc welding robots structure characteristics, the requirements of working space and the task feature, a 5-freedom pending robot structure is proposed.
首先,分析了弧焊机器人的结构特点,并根据工作空间要求、作业特点,确定了一种5自由度悬挂式构形。
This article introduces the characteristic, working principle, main parts and the welding efficiency of the new single-pole pipe-board auto inert gas arc welding machine.
介绍了新型单柱式全自动管板氩弧焊机的结构特点、工作原理、主要部件和焊接的使用效果。
The electronic reactor and the short-circuit protecting circuit used in arc welding invertebrate introduced, and their working principles are analyzed.
主要介绍了用于弧焊逆变器中的电子电抗器和短路保护电路,并对其工作原理进行了分析。
Based on simulating transient process of power conversion circuit thoroughly and systematically, working condition of magnetic core is analyzed in detail at various arc loads.
建立了弧焊逆变器的器件级数学模型,对功率变换回路的瞬态过程进行了深入系统的仿真研究。
One arc furnace with capacity of 180 tons is under construction now. It will produce 1 million 300 thousand tons of steel a year. 600 employees are working here. It will be launched in spring 2012.
一个容量180吨的电弧炉正在建设中,它一年将生产一百三十万吨钢铁,有600个工人在这里工作,它将落成于2012年的春天。
An automatic arc welding system for ellipse seams of various liquid tanks was designed and its structure and characteristic and working principle are described in this paper.
介绍了各种罐体椭圆形环焊缝全自动焊接系统的结构、组成和工作原理以及设计的主要特点。
A medium frequency pulsed starting arc unit, which consistS of a voltage dowble is introduced in this paper, and its working principle and parameter design are also analyzed.
介绍了一种用逆变方式和倍压整流方式构成的中频逆变式引弧器,并对其工作原理及参数设计进行了分析。
By using the neurobehavioral core test battery (NCTB), 44 manganese exposed workers working in electrical arc welding and dry battery workshops were tested.
选择44名接触不同空气中锰浓度的干电池制造工和电焊工,进行了成套的神经行为功能测验。
There is a working procedure of tool tip arc grinding during the laser welding saw blade manufacturing process.
激光焊接锯片生产工艺过程中,有一道刀头磨弧工序。
Based on it's working principle, we determine the arc-suppression coil with magnetic bias methods.
依据偏磁式消弧线圈的工作原理,确定了偏磁式消弧线圈的控制方法。
The surface temperatures of grooves of an oil-flooded single screw compressor are measured with a slide-ring, and the surface temperatures on different working conditions arc given.
利用滑环装置测量了喷油单螺杆压缩机转子螺槽的表面温度,给出了各种不同工况下表面温度的数据。
A small high-frequency arc starter is introduced in this paper. Its component parts and working principles are analysed.
介绍了一种小型高频引弧器,分析了它的组成和工作原理。
The protector will not produce electric arc and spark during working.
本保护器工作时不会产生电弧和火花。
The problem of annual arc welding power source whose output is surge and power factor is lower, is solved by means of main circuit, arc ignition circuit and arc static circuit working together.
通过主回路、引弧电路、稳弧电路的共同作用,解决了一般弧焊电源输出脉动大、功率因数低的缺点。
Aimed at large arc shape frame, the die with once bending forming structure is designed, the working procedure is reduced, and the costs are lowed as well.
针对大圆弧形机壳,设计了一次折弯成形结构模具,减少工序,降低成本。
The transmission part is an involute gear, and the working part can adopt different working faces, such as a cylinder excircle face, a circular arc tooth or an involutes tooth gear top cavetto.
传动部分是渐开线齿轮,工作部分可采用不同的工作面,如圆柱外圆面或圆弧形齿或渐开线齿轮齿顶修圆。
Magnetic working substance area is circular arc with certain radial thickness, and has certain gap with stator permanent magnetism block.
磁工质区域为圆弧形,有一定的径向厚度,与定子永磁块间留有一定的间隙。
Working principle and application features of anti-arc coil in transformer neutral-point earthing mode are introduced, which provides safety running for electricity supply system.
阐述了变压器中性点接地方式中的消弧线圈接地方式的工作原理和使用特点,为供电系统的安全运行提供了保障。
Working principle and application features of anti-arc coil in transformer neutral-point earthing mode are introduced, which provides safety running for electricity supply system.
阐述了变压器中性点接地方式中的消弧线圈接地方式的工作原理和使用特点,为供电系统的安全运行提供了保障。
应用推荐