The crack sensibility is one important content in steel weldability.
裂纹敏感性是钢的焊接性的重要内容之一。
The performance and weldability of industrial pure titanium were recommended.
介绍了工业纯钛的特性及焊接性。
Good impact and abrasion resistance. Excellent gas cutting property and weldability.
良好的抗冲击耐磨性，很好的可气割性和可焊接性。
The paper investigates the weldability of D36 HSLA steel used for heavy crane beams.
研究了重型吊车梁用D36低合金高强钢的焊接性。
The weldability of high strength steel for railway vehicle produced by Baosteel was studied.
研究了宝钢高强度铁道车辆用钢的焊接性。
As the steel grade improved, the requirements for toughness and weldability are also enhanced.
随着管材强度级别的提高，对管材的韧性、焊接性等性能要求也进一步提高。
It power boasts excellent machinability, high corrosion resistance, gond weldability and conductivity.
具有极佳的成型加工特性，高耐腐蚀性、良好的焊接性和导电性。
This article conducts a research on the weldability of crystal diode lead wire luminous electrotinning.
本文对晶体二极管引线光亮电镀锡的可焊性进行了研究。
This paper studies the effect of zinc and shielding gas type on Laser weldability of zinc-coated steels.
本文研究了锌对镀锌板激光焊接性影响，以及不同保护气体对镀锌板焊接性的影响。
The paper points out, that both joint strength and weldability should be considered, while selecting welds.
并指出对焊缝的选择，既要考虑连接强度，又要考虑加工的可能性。
The weldability of the 2205 duplex stainless steel were investigated and the key welding technique was introduced.
对2205双相不锈钢的焊接性能进行了研究分析，对材料的焊接技术关键进行了介绍。
The weldability of metal is introduced in the thesis, also the factors of affecting the weldability of metal are analyzed.
论文对金属焊接性进行了介绍，并对金属焊接性的影响因素进行了分析。
The results show that the steel has superior weldability, low cold-cracking sensitivity and good weather corrosion resistance.
试验结果表明，该钢具有优异的焊接性能、较低的焊接冷裂纹敏感性和良好的耐大气腐蚀性能。
The paper assessed the procedure weldability of T23(P23) steel, which offers great help to the applications of T23(P23) steel.
本文对T23（P23）钢的工艺焊接性进行评价，有助于该钢种的应用。
The welding metallurgical characteristics and weldability of duplex ferritic-austenitic stainless steels were studied in this paper.
本文就铁素体-奥氏体双相不锈钢的焊接冶金特性和焊接性进行了研究。
Based on the analysing weldability of the alloy, the welding method, material and procedure are chosen and the alloy plates are welded.
在合金焊接性分析的基础上，探讨了相应的焊接方法、焊接材料和焊接工艺措施，并进行了试板的焊接。
An autogenous weld is produced by GTAW and can be used to test material weldability and gas shield usage, and to set welding parameters.
可以用氩弧焊(GTAW)制备气焊缝，这种焊接方法可以用来测试材料的可焊接性，检查气体保护的使用以及焊接参数的设定。
The results show that the defects in the weld such as interface reactant and pore are the key factors to reduce the material weldability.
研究发现，焊缝中存在的界面反应物、气孔缺陷，是导致该种材料焊接性显著降低的主要因素。
Tin deposits obtained have strengths such as bright and uniform appearance, good coherence and weldability, Low cost and high efficiency.
所得锡镀层光亮细致、结合力强、可焊性好、生产成本低、效率高。
Based on the analysis of influential factors of high-strength steel weldability, the article introduces ways of choosing welding technique.
通过对高强钢焊接性影响因素的分析，论述了如何合理选择焊接工艺。
The test result show, it possess higher crack resistance, satisfactory weldability, and im-prove mechanical properties of the welded joint.
结果表明，它有较高的抗裂性和良好的焊接性，并能提高焊接接头的机械性能。
Expert system of metal weldability estimate based on knowledge base is put forward according to analysis of metal weldability characteristic.
从分析金属焊接性的特点出发，提出了基于知识库的金属焊接性评价专家系统。
By analyzing the weldability of beat resistant austenitic stainless steel, the procedures and precautions are proposed for welding the steel.
通过对奥氏体耐热不锈钢的焊接性分析，提出奥氏体耐热不锈钢焊接应采取的焊接工艺及应注意的问题。
The argon arc welding process after replacement of intercooler cooling section was presented. The welding feature and weldability were analyzed.
介绍了中冷器抽换散热单节的氩弧焊接工艺，分析了中冷器抽换散热单节的焊接特点以及焊接性。
The necessity for welding crane rails is analyzed; weldability discussed and welding procedure worked out. The product is successfully welded, too.
论述了起重机轨道焊接的必要性，分析了其焊接性，拟定了焊接工艺并成功地焊接了产品。
In this paper, the present research on the surface modified the weldability of ceramic materials during brazing and diffusion welding was reviewed.
综述了表面改性在陶瓷钎焊和扩散焊领域应用的研究现状，并展望了表面改性技术在材料焊接领域的应用前景。
The results show that the steel has excellent weldability, the joints have not only high strength, but also sufficient plasticities and ductilities.
结果表明，该超高强钢的焊接性良好，不仅接头强度高，而且塑性仍保持很高水平。
Based on the special weldability of big diameter stainless steel pipe complete welding, puts forward the more reasonable welding process and operational method.
大直径不锈钢管的全位置焊接，根据其特殊的焊接性，提出较合理的焊接工艺和操作方法。
High strength, toughness, weldability and low temperature toughness is also widely used in the manufacture of Bridges, boilers, ships and other large structures.
强度较高，且韧性、焊接性及低温韧性也较好，被广泛用于制造桥梁、锅炉、船舶等大型结构。
High strength, toughness, weldability and low temperature toughness is also widely used in the manufacture of Bridges, boilers, ships and other large structures.
强度较高，且韧性、焊接性及低温韧性也较好，被广泛用于制造桥梁、锅炉、船舶等大型结构。
应用推荐