The principle of weft feeding unit used in Model CGD721 rapier loom was explained in this article and the components of this unit have been discussed and analysed in detail.
本文论述了CGD721型剑杆织机供纬系统的工作原理，并对该系统的组成部分进行了深入的分析和讨论。
In this paper are discussed the functions of MC14538 which is used to measure and control the weft yarn of the rapier loom as well as the working principle and maintenance of the detecting plate.
MC 14538可用于剑杆织机纬纱的测控，介绍了它的功能及检测板的工作原理和维护过程。
To innovate weft control system of projectile loom with low cost, signal transducer was designed, designed weft sensor was instead of weft detector, circuit diagram was got.
为了实现在片梭织机上进行纬向控制系统的低成本改造，自行设计了信号转换板，采用常规电子元器件自制的纬纱传感器代替纬纱检测器，并给出了线路连接图。
During double weft weaving of GAMMA rapier loom, the mechanism has its speciality.
GAMMA型剑杆织机进行双纬织造时，机构设置有其特殊性。
Weft broken-end stop motion mechanism is reformed, and new function is sited. So without weft, loom does not stop and new type textile product of different stitch structure and kind can be produced.
对纬纱断头自停机构进行改造，设置了新的功能，使织机在送空纬时不停车，可以生产出新型组织结构的纺织品。
This paper introduces the construction of weft insertion motion of rapier loom G1613, and analyses the movement regulation of weft insertion and battening.
介绍了G 1613型剑杆织机引纬系统的组成，对引纬系统的引纬和打纬等机构的运动规律进行了分析与讨论。
Weaving: in this method parallel threads called warp threads are arranged on a loom and by means of a shuttle other threads called weft threads are interlaced backwards and forwards across them.
机织法：这种方法是将平行于布边的线(称为经线)，安排到织布机上，其他的线垂直于布边用梭子来回交织称为纬线。
This paper introduces how to collect the Angle signal by using Sitsubish PLC for stop location control of high-speed rapier loom when warp or weft broke.
主要介绍利用三菱p LC对高速剑杆织机控制时角度信号的采集以及断经断纬时定位停车的处理。
This method has advantages, such as making the structure more simple, extending the weft density scope of loom and suiting the demand of loom working at high speed.
该方法具有结构简单，扩大了织机纬密适应范围，能适应织机高速运转的特点。
The speed of weft storage devices of a loom should be up to various requirements of weaving technology. Besides Continuous adjustability, the speed should also be very stable.
织机储纬器的速度应适应各种织造工艺要求，除速度连续可调外，还应平稳。
The synthetical analysis of weft motion in the rapier loom by elastic dynamics and kinematics methods is made in this paper.
用弹性动力学和运动学方法对剑杆织机动态引纬运动进行了综合分析。
We analyze the main technical parameter of THEMA rapier loom with the data processed by computer by testing shedding mechanism and weft insertion mechanism with mechanical dynamic tester.
运用机械动态参数测试仪，通过对THEMA剑杆织机的开口、引纬机构进行动态测试，利用计算机处理有关测试数据，分析和讨论了该机的主要技术参数。
This article analyses the movement principle and regulation of the weft insertion of rapier loom model G1731, and discusses its adjustment.
分析了G1731型剑杆织机引纬机构的原理及运动规律，探讨了剑杆织机引纬机构的调整方法。
Through an analysis of the forces acting on a weft which is inserted by air-jet in a loom, a differential equation of weft flying movement is estabilislied.
本文通过对喷气引纬过程中气流对纬纱作用力的分析，建立了纬纱运动的微分方程。
This article introduces the use of electronic control system to overcome the difficulty in weaving large area repeat coloured weft weave on ordinary loom, and ideal weaving effect already got.
介绍了自动控制系统在普通织机上的应用，解决了普通织机织制色纬大循环织物的难题，并获得了较理想的织造效果。
A dynamic analysis under the applied force is made of the weft-insertion mechanism of the ZGJ83 rigid-rapier loom designed by the college.
本文对ZGJ83型刚性剑杆织机引纬机构进行了受力分析，并找出对凸轮驱动力影响较大的构件为剑杆、投剑杆及角形臂。
Canceled weft finding clutch, slow clutch in the traditional loom, machine is simple and reduce failure source.
取消了传统织机常用的寻纬离合器、慢速离合器，机构简单，减少了故障源。
The reason and of weft bar existed in weaving cloth on shuttle loom is analysed. The ways and measures to take in practice to reduce weft bar are discussed.
文章论述了有梭织机产生横档的原因、减少横档的方法，以及在实际生产中采取的相应措施。
Through these measures, loose selvage was resolved, weft stoppage is reduced, and loom efficiency and first grade percentage put in storage are enhanced.
通过在以上各方面采取措施，解决了松边问题，降低了纬向停台，提高了织机效率和产品的入库一等品率。
To reduce loom stop caused by weft insertion is an important project in improving weaving efficiency of air jet loom.
降低纬向停台是提高喷气织机效率的重要课题。
To reduce loom stop caused by weft insertion is an important project in improving weaving efficiency of air jet loom.
降低纬向停台是提高喷气织机效率的重要课题。
应用推荐