Finally, the wear mechanics and Vaiation law of wear-resistance of coating were discussed, which Provided an instruct to the design of wear-resistance coating.
并探讨了涂层的磨损机理和磨损性能的变化规律,从而为耐磨涂层的设计提供指导。
Black tin coating was prepared by multi-arc ion plating technology and wear resistance corrosion resistance heat-proof property and absorption property of solar spectrum were also discussed.
摘要介绍了利用多弧离子镀工艺制备黑色氮钛膜,并对其耐磨损、耐腐蚀、热稳定性及太阳光谱吸收等性能进行了研究。
The method provides a new experimental basis for mechanism study on resistance to wear and erosion as well as quality comparison of the coating.
分析结果为燃气轮机叶片涂层的耐磨耐腐蚀机理探讨和为涂层质量的比较提供了一种新的实验依据。
The microstructure and wear resistance of Ni based alloy coating on the high temperature alloy GH33 by laser melt casting have been studied.
研究了高温合金GH33表面激光熔铸镍基合金涂层的组织和耐磨性能。
The coating made by this method exhibits good coherence, excellent corrosion resistance, wear resistance and has wide application in future.
该方法所得涂层结合强度高,耐蚀、耐磨性好,具有广阔的应用前景。
This article in the light df the main wear type of high speed steel tool and common hard alloy tool, design 'es a new kind wear resistance coating.
本文针对高速钢刀具和普通硬质合金刀具的主要磨损形式,设计了一种新型的刀具耐磨涂料。
The results show that the LX88A coating has excellent erosion wear resistance, which is an economical and effective erosion wear resistance coating for oil field mechanical equipment.
结果表明,超音速电弧喷涂LX88A涂层具有良好的抗冲刷磨损性能,是一种经济有效的石油矿场机械防冲蚀涂层。
I plant of the chromium oxide, alumina ceramic coating and has a tungsten carbide metal-resistant coating wear, corrosion resistance, high temperature, and other fine performance.
我厂所制备的氧化铬、氧化铝陶瓷涂层和碳化钨金属涂层有着耐磨损、耐腐蚀、耐高温等优良性能。
The microstructure, microhardness and dry-sliding wear resistance of the coating were evaluated.
并对涂层的显微组织、显微硬度和室温干滑动实验进行了具体分析。
The application results show that the synthesized coating has a good wear resistance, and the service life equipment can be elongated.
现场应用试验表明这种涂层具有较好的耐磨蚀性能,可大大延长设备的使用寿命。
Titanium nitride coating has great application in industry owing to its superior properties, such as good wear and corrosion resistance, low friction coefficient and good thermal barrier properties.
氮化钛涂层因具有良好的耐蚀性、耐磨性及低的摩擦系数在工业上得到广泛应用。
This coating possesses not only better hardness and wear-resistance, but also better oxidation resistance at high temperature.
涂层不但具有较好的硬度、耐磨性,还具有较好的抗高温氧化性能。
It is found that the microcrystals and amorphous phases in the microstructure of the coating play key role in its wear-resistance and corrosion-resistance.
涂层微观组织分析表明,涂层组织中的微晶和非晶相对涂层的耐磨性和耐腐蚀性都有重要的意义。
The hardness, Young's modulus, wear resistance, and corrosion resistance of the coating are higher due to the recombination action of amorphous and inter-metallic compounds.
在非晶相和金属间化合物复合作用下,复合涂层具有高的硬度、弹性模量、耐磨性和耐蚀性。
The coating possesses high wear and cold-welding resistance and good electric conductivity both in atmosphere and in ultrahigh vacuum.
该镀层在大气或超高真空条件下具有良好的耐磨性、防冷焊性和导电性;
Black tin coating was prepared by multi arc ion plating technology, and wear resistance, corrosion resistance, heat proof property and absorption property of solar spectrum were also discussed.
介绍了利用多弧离子镀工艺制备黑色氮钛膜,并对其耐磨损、耐腐蚀、热稳定性及太阳光谱吸收等性能进行了研究。
The burning loss of carbon, which causes heavy oxidation and high porosity, is the main reason for lower hardness, strength and worse wear resistance of T8 coating.
T8涂层中由于碳元素被大量烧损,导致涂层氧化严重,孔隙率高,这是造成涂层硬度和强度不高及耐磨性较差的主要原因。
And also the coating with good performance of wear resistance, anticorrosion and weather resistance was found.
同时这种瓷质彩色膜层还具有良好的耐磨、耐腐蚀和耐候性能。
When WC content is more then 50%, spray-fusing technological property becomes worse, hardness of sprayed coating and low-stress abrasive particle wear resistance are weaken.
当w(WC)大于50%时,WC的加入使喷熔工艺性能变得极差,喷熔层的硬度和耐低应力磨粒磨损性能降低。
The factors influencing the wear resistance of UV coating were discussed.
讨论了影响紫外光固化涂料耐磨性的几个因素。
The results show that modified PTFE coating has several outstanding properties such as anti adherence, wear resistance, anti corrupt and excellent performance at high temperature.
试验结果表明:研制得的改性聚四氟乙烯涂层具有优良的不粘性、耐磨性、附着力、耐蚀性、耐高温性等综合性能。
The wear resistance was directly proportional to the tensile strength of the coating.
涂层的抗拉结合强度与耐磨性之间存在着正比关系。
The influence of coating, spot size, power and scanning speed on hardening layer features and wear resistance were studied.
研完了表面状态、斑尺寸、率及扫描速度对硬化层特征及耐磨性的影响。
Alloy coating with high wear-and corrosion-resistance plays an important role in elongating the life of industrial components.
高耐磨耐蚀合金涂层对于提高工业零部件的使用寿命具有重要作用。
The hardness and wear resistance of the auto-brush electroplated coating are have average value near those of the manual-brush electroplated coating.
镀层硬度和耐磨性能等与手动纳米刷镀层性能相近,但是,其性能分布更均匀。
Spray coating of polytetrafluoroethylene (f 4) is adopted to improve the wear resistance of the stirrer's impeller, and so its service life is extended.
为提高搅拌器叶轮的耐磨性而采用了喷涂聚四氟乙烯(F -4)新技术,大大提高了使用寿命。
The abrasive wear resistance of the coating reduced when WC content was more than 25%.
当粉芯中WC质量分数超过25%后,涂层的耐磨性有所下降;
Corrosion resistance and wear resistance of the combination coating are determined.
测试了组合镀层的耐蚀性和耐磨性能。
Excellent durability and wear resistance with the special U. V. coating.
采用特殊u.v。处理,具有出色的耐磨性和抗冲击性,经久耐用。
Excellent durability and wear resistance with the special U. V. coating.
采用特殊u.v。处理,具有出色的耐磨性和抗冲击性,经久耐用。
应用推荐