The Sentronic series software features control loop customization so the valve can be tuned to the application.
该系列软件的功能昱准控制阀回路定制功能,这样可以调整到应用程序。
This paper introduces the principle of a kind of jig electromagnetic valve, gives out hardware and software.
介绍了一种跳汰机电磁风阀控制器的原理,给出了相应的硬件和软件的组成。
The paper introduces the design idea of microcomputerbased electromagnetic valve controller for general Jig, and it gives corresponding hardware component and software design method.
介绍了一种通用跳汰机电磁风阀控制器的设计思路,给出了相应的硬件组成和软件设计方法。
This paper introduced that the structure, testing principle and boundary design of the system software for test system of the performance core of security valve.
介绍了安全阀铁心磁性能测试系统的结构、测量原理。系统软件界面设计。
The structure, testing principle and boundary design of the system software for test system of the performance core of security valve are introduced in this paper.
介绍了安全阀铁心磁性能测试系统的结构、测量原理、系统软件界面设计。
The controller design method to use for electronic valve was introduced. its hardware and relevant application software were introduced, too.
介绍了一种为电动阀门配套使用的控制器的设计方法,阐述了其硬件组成及相关应用软件的设计思想。
The air braking simulation software is used to analyze the initial charging test process of the 120 valves on the 705 test stand and the 120 valve test stand.
利用空气制动仿真软件仿真分析了120阀在705试验台和120阀试验台上的初充气试验过程。
In this paper, a test system of electromagnetic performance of solenoid valve is introduced. Its hardware structure and relevant software are discussed.
主要介绍电磁阀电磁性能测试系统的硬件结构,简要阐述了相关软件。
The article gives a detail description of working principle, construction of hardware and software design for Intelligent Control System of multi-turn electric valve actuators.
阐述了一种多转式阀门电动执行机构智能控制系统的工作原理、硬件构成和软件设计。
Taking the advantage of CAE powerful functions of ANSYS software, a finite element analysis of butterfly valve is realized, and the dimension and structure of valve body is optimized.
利用ANSYS软件强大的CAE功能进行碟阀的有限元分析,从而可以对碟阀的尺寸和结构进行优化。
In addition, the software design of intelligent valve positioner is also introduced.
同时也介绍了智能阀门定位器的软件设计。
By using the dynamic mesh model in CFD software to calculate the pipe valve closing, use the characteristic method and the experiment to compare with the same model.
运用计算流体动力学(CFD)的动网格技术对管道中的阀门关闭进行了动态模拟,针对同一模型,并与特征线法及试验进行了比较。
IC card can also record the running situation of water meter, and manage total using amounts, total purchasing amounts and on-off valve state under control of managing computer or managing software.
IC卡还能记录表的运行情况,在管理机或管理软件下将表的总用水量、总购水量、开关阀状态等信息进行管理。
Finally introduced including the main control console, the ballast work interface operation through the operating instructions of some pumps and valve which used during exploiting the software.
最后通过对软件开发过程中所用到的一些泵、阀等的使用说明来介绍包括主控制台、压载作业在内的界面操作。
From valve checkers for troubleshooting to mounting manifolds for easy installation on machines to configuration software, Moog's expertise involves helping you to get running quickly and easily.
从阀门跳棋的故障排除,以歧管安装到机器上安装方便的配置软件,穆格的专长是帮助您快速,方便地得到执行。
The main subject of this thesis is about large-calibred valve. By using the finite element software ANSYS, we can do some work such as static analysis, structural optimization and fatigue analysis.
本论文以大口径闸阀阀体为主要研究对象,利用大型有限元软件ANSYS对其进行有限元静力分析、优化计算和疲劳寿命分析。
Computer simulation shows that the system or software can be used to identify pump valve fault accurately.
计算机模拟识别表明,该系统可较为准确地识别出各泵阀的故障。
The flow field cavitation inside the water hydraulic poppet valve was modeled and analyzed by using the software of FLUENT, and the relation between the cavitation and the pressure was investigated.
对纯水液压锥阀阀口流场气穴进行了数学建模,并用FLUENT软件进行了仿真分析,从而得到气穴发生的程度与流场压力分布之间的关系。
Eventually the technology maturity of the butterfly valve is mapped by using the method put forward by this thesis and the software, and the result is discussed.
最后应用所提出的产品技术成熟度预测技术和所设计的软件对我国蝶阀产品的技术成熟度进行了研究,并对预测结果进行了讨论。
The structure and function of the key technology on string, distributing valve, steam umbrella and the software are introduced.
介绍了多点注汽技术中管柱结构、配汽阀、蒸汽伞、多点注汽设计软件等关键技术的结构及功能。
We have executed static analysis, model analysis and dynamic analysis on the exhaust valve in one cycle of the engine, basing on the model we founded and the finite element analysis software of ANSYS.
基于所建立的模型和ANSYS软件平台对以上的结果进行分析,分别对气门进行静力学分析、模态分析和气门一个运转周期内的瞬态动力学分析。
Using fluid dynamics analysis software CFD made a numerical simulation to the BOP control system pressure relief valve under the valve different working conditions;
使用流体力学分析软件对减压溢流阀在阀口不同开度条件下进行了阀内流场的数值模拟和仿真;
This article uses the ANSYS software and analysis design method to make a detailed finite element stress analysis of the head of valve body where placed the quarter rings.
利用ANSYS软件及其分析设计方法,对阀体中腔安装四合环的位置进行了有限元应力分析。
We take the adjustable valve as control objects and research the methods of the realizing of the hardware, software and algorithm of the system.
以电动调节阀为控制对象,探讨了整个控制系统的软、硬件实现和算法实现。
Aimed to the characteristic and requirement of East Boiler Valve Limited Company in this thesis, the software adopts B/S three-tier structure.
本论文以东方锅炉阀门有限公司为研究对象,采用B/S三层体系结构,以微软公司的。
Hardware interface includes A/D, D/A converters, programmable gain controller and multiplex sampling valve controller. software includes on-line process analysis and normal analysis unit.
该系统中的硬件包括D/A和A/D转换接口、程控增益放大器、多路取样阀门控制接口等;软件包括在线流程分析和常规分析软件。
The 3-d geometrical model of relief valve was built by using PROE software, according to its actual structure and parameters as well as feasibility of computational mathematical model.
根据安全阀的实际结构和参数,利用三维建模软件Proe,结合计算数学模型的可行性,建立了安全阀流道的三维几何模型。
The influence of valve timing on the performance of 6106 diesel engine was studied by using GT-Power software in this paper.
研究了不同配气定时以及不同气门升程工质分层程度的变化规律以及影响因素,对自燃着火区域进行了统计分析。
The influence of valve timing on the performance of 6106 diesel engine was studied by using GT-Power software in this paper.
研究了不同配气定时以及不同气门升程工质分层程度的变化规律以及影响因素,对自燃着火区域进行了统计分析。
应用推荐