Through simulation and analysis, Modeler enables the optimization of a business process.
通过模拟和分析，Modeler支持对业务流程进行优化。
This method has the advantages of low complexity and good performance through simulation and analysis.
这种方法具有实现复杂度低和性能优越等优点。
Through simulation and analysis, it is educed that the shrinkage in tube billet results from too low gravitation multiple near liquid-solid interfaces by intensive magnetic field.
通过数值模拟和分析得出，较大的磁感应强度造成凝固界面前沿附近金属熔体重力倍数过低是在管坯中产生缩松的原因。
The accuracy and feasibility of the algorithm herein is proved through theoretical analysis and strict mathematic deduction and simulation studies performed on the algorithm.
通过理论分析和严密的数学推导以及对算法实现的仿真研究，证明了该算法的正确性和可行性。
Through to the analysis of the simulation test in the lab and the test data in the field, the authors discussed TDR monitoring landslide practical application effect and validity.
通过对室内模拟试验和野外应用试验数据的分析、对比，讨论了TDR监测滑坡的实际应用效果和有效性。
The formula of the electric field distribution through CST and the numerical simulation, simulation results with theoretical analysis concluded unanimously.
并通过三维电磁场软件进行了数值模拟，模拟结果与理论分析所得结论一致。
Through theory analysis and simulation, this article presents a new method of low altitude target detection and tracking, based on high distance resolution technology.
本文以高距离分辨率技术为基础，通过理论分析和仿真，寻找一种解决低空目标探测与跟踪的新途径。
It allows manufacturers to simulate all the industrial design processes, from the pre-project phase, through detailed design, analysis, simulation, assembly and maintenance.
它使制造商能够模拟所有的工业设计流程，从项目前期阶段通过详细设计，分析，仿真，装配和维修。
Hypersonic viscous interaction effects on measurement of free stream pressure in test section are studied through theoretical analysis, experiment measurement and numerical simulation.
通过理论分析、实验测量和数值模拟，研究高超声速粘性相互作用对实验段自由流静压测量的影响。
Through full simulation, studying and analysis of the characteristics of simple heuristic scheduling rules, I make sure each rule's influence degree for different evaluation measures.
通过对多种启发式调度规则特性的全面仿真研究与分析，得出了各种规则与生产管理评价指标的影响度关系。
Through the microstructure analysis and residual stress measurement on a quenching test-piece, the feasibility of the numerical simulation is proved.
通过对淬火试件进行金相组织分析和残余应力测量，验证了数值模拟的可行性。
Through the analysis and understading of the simulation behaviour in vocal music education, it is helpful to improve the standard of vocal music teaching and learning.
模仿是人的天性，是人生成长过程中经验和能力获得的重要手段；模仿是学习声乐的起点。
Through a comprehensive analysis on various dynamic monitoring data and a large amount of fine numerical simulation study of dense grid, it makes clear the residual oil distribution.
通过各种动态监测资料综合分析和密网络大规模精细数值模拟研究，搞清了剩余油分布状况。
Through the analysis of the working process of this linkage system, this paper execute the dynamic simulation and optimization of this model by using multi-body system dynamics software ADAMS.
通过对肘杆系统工作过程的分析并利用多体系统动力学软件（ ADAMS）对模型进行了动力学模拟和优化设计。
Through the numerical simulation to transient analysis in heating networks, it is consult value and guide significance for the water hammer protection measure.
通过数值模拟方法分析供热管网的瞬变流动工况，对研究供热管网的具体水锤防护措施有参考价值和指导意义。
Through theoretical analysis and numerical simulation, the pattern reconfigurable feasibility of the structures of butterfly, folded dipole and double-feed is analyzed.
本文通过理论分析和软件数值仿真，分析了蝶形结构、折合偶极子结构以及双馈方式实现方向图可重构的可行性。
Through theoretical analysis and computer simulation and experimental study, analyzed effective parameters of the functions of suction drum-type rice precision seeder.
通过理论分析、计算机仿真和试验研究分析了影响气吸滚筒式水稻精量播种装置播种性能的参数。
Through analysis and using computer programs, the whole-process simulation and calculation is achieved, the maximum overvoltage value when switching on and off the capacitor being attained.
根据分析和利用计算机程序实现了全过程的模拟及计算，得到电容器分、合闸的最大过电压值。
Carry on indoor model simulation experiment, through experimental result with perform comparison verification of result of analysis on feasibility and accuracy of method instead.
进行了室内模型模拟实验，通过实验结果与反演结果的比较验证反演方法的可行性及准确性。
Through the analysis and simulation of the system, suggest the parameters to be considered for the formulating of operation program.
通过系统模拟，分析各种关键因素对生产计划执行过程的影响。提出编制连铸生产计划时应考虑的问题。
And the mathematical model for the calculation of the technological process optimization was built through artificial neural net simulation of the technological analysis of the plastic part.
通过对塑件工艺分析的人工神经网络模拟，建立了可供工艺优化计算的数学模型。
Academic analysis and simulation calculation about starting characteristic of motor generator system in low voltage were carried through.
针对电动机—发电机系统在低网压下的启动特性进行了理论分析和模拟计算。
Through numerical simulation and analysis, the top coal movement and stress distribution in mechanized top caving mining of thick coal seam is revealed.
通过数值模拟分析，提示了厚煤层综放开采时顶煤运移和应力分布规律。
And the progress of construction through analysis and optimization, simulation run major business process improvement, test the feasibility of the method and effectiveness.
并通过施工总进度分析与优化、主要业务流程仿真运行改进，验证了该方法的可行性及实效性。
Through the analysis of simulation results as compared with BP algorithm, this algorithm has the advantages of fine stability, fast convergence speed and high precision.
通过与BP算法的仿真结果比较分析，发现该算法稳定性好，收敛速度快，预测精度高。
Through MC simulation test, the relation of average grain size and Monte Carlo steps was established and the parameters of MC model were work out by the method of regression analysis.
运用MC模拟试验，建立了平均晶粒尺寸与蒙特卡罗步数之间的关系，利用回归分析方法确定了MC模型常数。
Through the researches on kind of cylindrical piezoelectric thin film micromotor mechanisms, finite element simulation and modal analysis are carried out in this paper.
通过对柱状薄膜型压电微电机致动机理的研究，运用有限元模拟进行模态分析。
Finally through simulation of energy consumption, we analyze the difference between dynamic analysis method and the effective heat transfer coefficient method.
最后通过能耗模拟，比较了动态计算方法和有效传热系数法的差别。
Their performances are checked through theoretical analysis, computer simulation and experiments.
理论分析和实验结果表明所提出方法的有效性和优越性。
Through computer's simulation, Research and analysis resistance characteristic that the flow equal distribution model needs.
进而建立流体均布模型，利用计算机模拟，研究分析使流体均匀分布所需的集管阻力特征。
应用推荐