This paper presents the three dimensional stress analysis method of slabs on elastic foundation.
本文提出了弹性地基上板的三维应力分析方法。
The stress fields of such structure around the opening were predicted using a three-dimensional, higher-order fast multipole boundary element method.
为精确模拟该结构的应力状况，该文提出一种三维高阶快速多极边界元法。
Because of the complexity in mathematics and the physics, solving the three-dimensional dynamic stress intensity factors is certainly limit.
三维裂纹在动态断裂力学中由于其数学和物理上的复杂性，求解其动态应力强度因子受到一定的限制。
In this paper, the interlaminar stress distributions of symmetric composite laminates with a hole are predicted by the three-dimensional elastoplastic finite element method.
本文用三维弹塑性有限元法计算了含圆孔对称复合材料层板的层间应力分布。
This paper analyzes the local stress in the anchorage zone of cable-beam and cable-tower with three-dimensional finite element model for providing the reference to similar works.
本文建立索梁及索塔锚固的三维有限元模型，分析这些部位的局部应力。
In this thesis, the stress intensity factors of top-down cracks caused by loading are calculated using three dimensional finite element model and compared to the results of plane strain model.
本文采用三维有限元模型分析了荷载作用下自上而下裂缝尖端的应力强度因子，并与二维平面应变模型分析的结果进行比较。
Using method of three dimensional FEM analysis, whole stress distribution in the joints is are obtained.
用三维弹塑性有限元分析方法，全面分析了点焊搭接接头的应力分布情况。
Model parameters have the important effects on three-dimensional distinct element code (3dec) modeling of the stress wave propagation and attenuation in jointed rock masses as well as other codes.
与其他数值软件一样，用三维离散元程序(3dec)模拟应力波在节理岩体中的传播和衰减时，模型参数对模拟结果有很重要的影响。
For the question of the calculation of the stress intensity factors for the three-dimensional, traditional methods of generation nodes mainly rely on our hands, then generate elements and structures.
但在对三维裂纹的应力强度因子求解问题上目前所采用的方法主要是靠人工手动地生成节点，然后再生成单元和结构。
This paper analyses three-dimensional stress distributions of the stud anchor chain by the theory of finite element and boundary element.
本文应用三维边界元法和三维有限元法对有挡锚链进行了三维应力分析，并将其结果与电测实验数据作了比较，吻合得很好。
A three-dimensional numerical model with free water surface and wall shear stress was used to analyze the water flow affected by piers.
该文采用具有自由水面和河床切应力计算的三维数学模型分析了桥墩群对河道水流的影响。
Three-dimensional finite element analysis of the stress of the mandible premolar under loading on its traumatic occlusal spots.
下颌前磨牙创伤咬合点加载的三维有限元应力分析。
The paper studies distribution law of stress and strain of gate-dam under static regime with three-dimensional finite element method.
本文采用三维有限元方法，研究堰闸坝在静力状态下其应力和变位的分布规律。
An element initial stress method to calculate stress intensity factor of three-dimensional mixed-mode crack is introduced.
对单元初始应力法应用于复合型三维裂纹问题进行了研究。
In order to approach the failure criterion of sand, an experiment of independent control three-dimensional stress of sand has been performed with some simpler device.
为了探索砂土的破坏条件，曾利用比较简单的设备进行了一种砂土的控制三向压力试验。
The tensile and compressive tests can be conducted under three dimensional state of stress with confining pressure and a given temperature.
拉、压试验可以在带国压和温度的三向应力状态下进行。
The three-dimensional exact solutions of the displacement, electric potential, magnetic potential, stress, electric displacement and magnetic induction of equilibrium problems are also obtained.
并得到了平衡问题的扇形板和扇形环板在两种边界条件下的位移、电势和磁势，应力、电位移和磁感应强度的三维精确解。
Based on the Reynolds Stress Model, the three-dimensional flow field was numerically simulated using the Reynolds averaged N-S system equations.
从雷诺应力模型出发，通过求解雷诺平均N - S方程组获得三维湍流流场的数值解。
According to the numerical results, the ultimate bearing capacity of foundation with consideration of three-dimensional stress is improved, which is of important significance for engineering.
根据算例表明当考虑三向应力状态时条形地基的极限承载力将提高，这对实际工程具有重要理论和现实意义。
It is especially important when three-dimensional problem must be solved with frozen stress method.
这在应用应力冻结法解决三维问题时尤为重要。
Based on the failure analysis of the fracturing pump valve chamber, a model for calculating its reliability under three-dimensional stress is established, and a computing program is worked out.
基于压裂泵阀箱的失效分析，建立了在三向应力作用下计算阀箱可靠性的模型，设计了计算程序。
Therefore, a vertical three-dimensional tectonic stress section passing Kala 2 gas pool is simulated.
为此，进行了克拉2气藏剖面三维构造应力场数值模拟。
The three dimensional welding residual stress and temperature fields in local PWHT are constructed.
构造了三维管接头焊接应力和局部热处理温度场。
The three-dimensional photoelasticity method is used to analyze the stress distribution in the bevel gear under torsional moment and centrifugal load.
本文用三维光弹性法分析锥齿轮在扭矩和离心载荷下的应力分布。
This paper applies the three-dimensional finite element method to the analysis of the stress for steam expanding vessel with tangential pipe, and the stress distribution has been obtained.
采用三维有限元方法对蒸汽扩容器与切向接管联接的关键部位进行了应力分析，获得了该部位的应力分布。
Firstly, the actual stress history of the projecting beam's maximal stress area is acquired by integrating the three-dimensional FEM analysis calculation and the dynamic stress test at field.
本文通过三维有限单元法分析计算与现场动态应力检测相结合，得到各工况下主梁最大应力部位的实际应力—时间历程。
This paper introduces a research result on the stress intensity factors of crackles on single side of revolving square sample with the stress freezing in three-dimensional photoelasticity.
本文介绍了采用三维光弹性应力冻结法，对旋转正方形试样半边裂纹应力强度因子进行研究的成果。
It is of important significance to study the ultimate bearing capacity of foundation in three-dimensional stress.
研究三向应力状态下条形地基极限承载力问题具有重要的理论和实际意义。
Distortion often takes place in streaks when the three dimensional frozen stress streaks are sectioned.
三维冻结应力条纹经切片加工后，往往发生条纹歪曲的现象。
Distortion often takes place in streaks when the three dimensional frozen stress streaks are sectioned.
三维冻结应力条纹经切片加工后，往往发生条纹歪曲的现象。
应用推荐