Conclusion Three dimensional finite element analysis is a kind of convenient and practicable method to be used as the confirmation and supplement of experimental biomechanics study of human being.
结论三维有限元分析方法是一种简便实用的生物力学研究方法，可作为实验生物力学研究的验证和补充方法。
Methods A three-dimensional finite element model of maxilla containing palatal implant was built using spiral CT scanning, computer image processing, and CAD technology.
方法采用螺旋CT扫描、计算机图像处理及CAD技术，建立含腭部种植体的上颌骨三维有限元模型。
The response of dual laterolog in tilted anisotropic sedimentary formation was simulated with the three-dimensional finite element method.
利用三维有限元法，模拟了电性各向异性倾斜沉积岩层的双侧向测井响应。
Using general-purpose finite element program ANSYS, a three-dimensional finite element model of interaction between raft foundation and groundwork soil is established.
结合大型有限元软件ANSYS，建立了筏形基础地基相互作用体系的全三维有限元模型。
In this paper, the interlaminar stress distributions of symmetric composite laminates with a hole are predicted by the three-dimensional elastoplastic finite element method.
本文用三维弹塑性有限元法计算了含圆孔对称复合材料层板的层间应力分布。
The tank structure of mining flameproof transformer is analyzed by the three-dimensional finite element method. The optimal design of tank has been carried out.
采用三维有限元法对矿用隔爆型变压器箱体结构进行了分析，完成了箱体结构的优化设计。
Study Design. Three-dimensional C3-C5 and C3-C4 finite element (FE) models were used to analyze biomechanical responses under compression and extension moments.
研究设计：三维c3 - C5和C3 - C4的有限元模型用于分析其在压缩和伸展运动下的生物力学反应。
Using finite element analysis method, three-dimensional calculation is conducted for force summing on rod in high-inclination well of Liaohe tidal zone oilfield.
应用有限元法对辽河滩海油田大斜度定向井抽油杆柱受力进行了三维计算。
Three-dimensional finite element analysis of the stress of the mandible premolar under loading on its traumatic occlusal spots.
下颌前磨牙创伤咬合点加载的三维有限元应力分析。
Thermal-structural analysis was performed for ultrasonic wire bonding(UWB) by three dimensional finite element method(FEM).
用三维有限元方法对超声波线焊进行了瞬态的热-结构分析。
This paper analyzes the local stress in the anchorage zone of cable-beam and cable-tower with three-dimensional finite element model for providing the reference to similar works.
本文建立索梁及索塔锚固的三维有限元模型，分析这些部位的局部应力。
Methods Spiral ct scanning, image processing and CAD technology and FEM software were employed in the study to construct the three-dimensional finite element model of maxilla with a palatal implant.
方法采用螺旋ct断层扫描、计算机图像处理、计算机辅助设计和有限元软件处理，建立含腭部种植体的上颌骨三维有限元模型。
The subsidence of foundation and stability of fill slope are analyzed by means of three-dimensional finite element and Relative Suggestions are put forward for the project construction.
本文利用三维有限元法对地基沉降、填方边坡稳定性等问题进行了分析，对工程施工提出了相应的建议。
This paper applies the three-dimensional finite element method to the analysis of the stress for steam expanding vessel with tangential pipe, and the stress distribution has been obtained.
采用三维有限元方法对蒸汽扩容器与切向接管联接的关键部位进行了应力分析，获得了该部位的应力分布。
Methods: Three-dimensional anisotropic finite element method.
方法：三维各向异性有限元法。
Objective: To establish a three-dimensional finite element model of normal human hip as a foundation of finite element analysis in this area.
目的：构建正常人体髋关节的三维有限元模型，作为该部位进一步有限元分析的基础。
Three-dimensional finite element numerical analog analysis technique has been widely applied to geotechnical engineering.
三维有限元数值模拟分析技术已广泛地应用于岩土工程领域。
Three dimensional finite element computing model is established and the effect of stemming length to deep hole bench blasting is studied by three dimensional finite element method.
采用三维有限元数值分析法，通过建立三维有限元计算模型，分析堵塞长度对堵塞区有效应力场的影响。
METHODS: Three-dimensional finite element method was used to analyze the initial stress around screw implant of different elastic modulus and different diameter.
方法：用三维有限元的方法对不同弹性模量和不同直径种植体植入后骨界面的初始应力进行分析。
Three-dimensional finite element analysis of the TMJ and the mandible under orthopedic chincup forces.
颏兜力作用下颞下颌关节及下颌骨受力的三维有限元分析。
The three-dimensional finite element method was used to solve some key problems in the design of the box floor in Suzhou River Estuarine Lock project.
针对苏州河河口水闸工程中的大跨度箱形底板设计中遇到的困难，利用三维有限元对底板结构进行计算分析。
Conclusion Establishment of three-dimensional finite element models of artificial lumbar intervertebral disc and analysis of its stress are feasible. The results are reliable.
结论建立人工腰椎间盘三维有限元模型并进行其应力分析是可行的，结果是可信的。
The three dimensional sensitivity distribution of an 8 electrode capacitance tomography sensor is analyzed using three-dimensional finite element method.
用电容传感器的三维有限元模型，分析了8电极电容层析成象传感器灵敏度的三维分布。
In this thesis, the stress intensity factors of top-down cracks caused by loading are calculated using three dimensional finite element model and compared to the results of plane strain model.
本文采用三维有限元模型分析了荷载作用下自上而下裂缝尖端的应力强度因子，并与二维平面应变模型分析的结果进行比较。
The three dimensional non linear finite element analysis of the transient temperature field during intermediate frequency quenching of diesel crankshaft was simulated by using of ANSYS.
利用ANSYS有限元分析软件，采用三维非线性有限元方法对柴油机曲轴中频淬火瞬态温度场进行了模拟计算；
This paper adopts the three-dimensional finite element model, analyses the mechanical tendency with the variety of the thickness and modulus of the pavement structure.
采用三维有限元计算模型，分析了路面结构厚度和模量变化时的力学响应变化趋势。
OBJECTIVE: Three-dimensional finite element method was used to observe and analysis the stress conduction of artificial lumbar intervertebral disc in lumbar motion segment.
目的：通过三维有限元的方法观察分析人工腰椎间盘在腰椎运动节段中的应力传导作用。
Based on three dimensional finite element analyses of magnetic fields, the cogging torque of a prototype motor is calculated using the virtual work and Maxwell stress tensor methods.
在电机内磁场三维有限元数值分析的基础上，采用虚位移和麦克斯韦张量两种不同的方法计算了电机的脉动转矩。
MAIN OUTCOME MEASURES: The three dimensional model and finite element model of lumbar spine were successfully established.
主要结局观察：成功建立了腰椎运动节段的三维模型和有限元模型。
MAIN OUTCOME MEASURES: The three dimensional model and finite element model of lumbar spine were successfully established.
主要结局观察：成功建立了腰椎运动节段的三维模型和有限元模型。
应用推荐