Three-dimensional finite element analysis of the TMJ and the mandible under orthopedic chincup forces.
颏兜力作用下颞下颌关节及下颌骨受力的三维有限元分析。
Objective To study artificial lumbar intervertebral disc three-dimensional finite element model and its stress state.
目的研究人工腰椎间盘三维有限元模型的建立及其应力分布。
Three-dimensional finite element numerical analog analysis technique has been widely applied to geotechnical engineering.
三维有限元数值模拟分析技术已广泛地应用于岩土工程领域。
Objective To explore a fast and precise method for the establishment of three-dimensional finite element model of lumbar.
目的探索一种快速、精确的建立腰椎三维有限元模型的简便方法。
DESIGN: To construct the three-dimensional finite element model of the fracture of humerus with different loading manners.
设计:进行不同应力加载的条件下,构建肱骨骨折的三维有限元模型。
Three-dimensional finite element analysis of the stress of the mandible premolar under loading on its traumatic occlusal spots.
下颌前磨牙创伤咬合点加载的三维有限元应力分析。
In this paper, the natural frequencies and modes of box water body researched by using three-dimensional finite element method.
本文运用三维有限元方法离散水体,研究了箱形术体的自振频率及动水压力振型。
Moreover, three-dimensional finite element model is set up to simulate the arch ring, and the measures relevant are also raised.
同时,利用空间三维有限元子域法对拱圈建立起模型,并给出相应的解决步骤。
The paper studies distribution law of stress and strain of gate-dam under static regime with three-dimensional finite element method.
本文采用三维有限元方法,研究堰闸坝在静力状态下其应力和变位的分布规律。
Methods Four different load patterns were added to the three-dimensional finite element model of the maxillary first molar established.
方法采用已建立的上颌第一磨牙三维有限元模型。使用四种不同负荷方式对模型进行加载。
The response of dual laterolog in tilted anisotropic sedimentary formation was simulated with the three-dimensional finite element method.
利用三维有限元法,模拟了电性各向异性倾斜沉积岩层的双侧向测井响应。
Objective: To establish a three-dimensional finite element model of normal human hip as a foundation of finite element analysis in this area.
目的:构建正常人体髋关节的三维有限元模型,作为该部位进一步有限元分析的基础。
Results A three-dimensional finite element model of palatal implant anchorage is successfully constructed, meeting the needs of biomechanical study.
结果建立了符合生物力学研究需要的腭部种植支抗的三维有限元模型。
The three-dimensional finite element method was used to solve some key problems in the design of the box floor in Suzhou River Estuarine Lock project.
针对苏州河河口水闸工程中的大跨度箱形底板设计中遇到的困难,利用三维有限元对底板结构进行计算分析。
Make the three-dimensional finite element model about plate rubber expansion device. And then the models are applied serviceable load and displacement.
建立板式橡胶伸缩装置的三维有限元模型并施加符合实际工作状况的载荷与位移边界条件。
The three dimensional sensitivity distribution of an 8 electrode capacitance tomography sensor is analyzed using three-dimensional finite element method.
用电容传感器的三维有限元模型,分析了8电极电容层析成象传感器灵敏度的三维分布。
The tank structure of mining flameproof transformer is analyzed by the three-dimensional finite element method. The optimal design of tank has been carried out.
采用三维有限元法对矿用隔爆型变压器箱体结构进行了分析,完成了箱体结构的优化设计。
METHODS: Three-dimensional finite element method was used to analyze the initial stress around screw implant of different elastic modulus and different diameter.
方法:用三维有限元的方法对不同弹性模量和不同直径种植体植入后骨界面的初始应力进行分析。
Using general-purpose finite element program ANSYS, a three-dimensional finite element model of interaction between raft foundation and groundwork soil is established.
结合大型有限元软件ANSYS,建立了筏形基础地基相互作用体系的全三维有限元模型。
This paper adopts the three-dimensional finite element model, analyses the mechanical tendency with the variety of the thickness and modulus of the pavement structure.
采用三维有限元计算模型,分析了路面结构厚度和模量变化时的力学响应变化趋势。
Objective: to explore the method to construct three-dimensional finite element model for maxillary posterior-tooth area, maxillary sinus, zygoma and zygomatic implant.
目的:探讨上颌骨后牙区、上颌窦、颧骨及颧骨种植体的三维有限元建模方法。
Methods The stress distribution and displacement of abutment were studied and analyzed by means of three-dimensional finite element when different loading was applied.
方法:用三维有限元法研究天然牙及中间种植体受力后的应力分布特点及位移规律。
Methods A three-dimensional finite element model of maxilla containing palatal implant was built using spiral CT scanning, computer image processing, and CAD technology.
方法采用螺旋CT扫描、计算机图像处理及CAD技术,建立含腭部种植体的上颌骨三维有限元模型。
OBJECTIVE: Three-dimensional finite element method was used to observe and analysis the stress conduction of artificial lumbar intervertebral disc in lumbar motion segment.
目的:通过三维有限元的方法观察分析人工腰椎间盘在腰椎运动节段中的应力传导作用。
Conclusion Establishment of three-dimensional finite element models of artificial lumbar intervertebral disc and analysis of its stress are feasible. The results are reliable.
结论建立人工腰椎间盘三维有限元模型并进行其应力分析是可行的,结果是可信的。
This paper analyzes the local stress in the anchorage zone of cable-beam and cable-tower with three-dimensional finite element model for providing the reference to similar works.
本文建立索梁及索塔锚固的三维有限元模型,分析这些部位的局部应力。
Methods Stress distribution of the spine in the upright, flexion and extension positions was analyzed using a three-dimensional finite element model of the spinal motion segment.
方法采用脊柱活动节段的三维有限元模型分析了脊柱在直立位、前屈位和后伸位的应力分布情况。
The subsidence of foundation and stability of fill slope are analyzed by means of three-dimensional finite element and Relative Suggestions are put forward for the project construction.
本文利用三维有限元法对地基沉降、填方边坡稳定性等问题进行了分析,对工程施工提出了相应的建议。
Objective: Built a three-dimensional finite element maxillary model including different diameter and length anchorage implant and analysis it, which can be used to chose the best implant.
目的:通过建立一个含不同直径、不同长度种植体的上颌骨三维有限元模型,并进行应力分析,选出最佳的支抗种植体。
Objective: Built a three-dimensional finite element maxillary model including different diameter and length anchorage implant and analysis it, which can be used to chose the best implant.
目的:通过建立一个含不同直径、不同长度种植体的上颌骨三维有限元模型,并进行应力分析,选出最佳的支抗种植体。
应用推荐