The reaction temperature had somehow effects on the reactions.
反应温度对反应有一定的影响。
The concentration of emulsifier and the reaction temperature is the main f...
乳化剂的浓度和反应温度是影响产品性能的主要因素。
The reaction temperature was moderate and the operation was easily controlled.
反应条件温和，操作容易控制。
With the reaction temperature, glycine copper micro-tubes become larger then the diameter.
随着反应温度的升高，甘氨酸铜微管的管径随之变大。
The data indicate that the conductivities of TM1and TM2 rise with the reaction temperature.
以上数据表明，TM1和TM2的离子电导率随着合成温度的升高而增大。
The effects of the reaction temperature, air quantity and reaction time on asphalt quality are studied.
考察了反应温度、风量和反应时间对油浆氧化沥青性能的影响。
By altering the reaction temperature, kinetics equation of phenyl hydroxide esterification was studied.
通过改变反应温度，系统地分析了苯酚直接酯化反应的动力学过程。
A comparative study showed that the yield was low when the reaction temperature was too low or too high.
反应温度过高或过低，碳纳米管的产率都很低。
The reaction temperature should be controlled in order to make LGV samples have proper average molecular mass.
合成时应对此进行严格控制和调整，使LGV产物具有合理的平均分子量分布。
The influence which the reaction time and the reaction temperature had made to adsorption capacity was studied.
在此基础上研究和探讨了反应时间、反应温度对吸附剂吸附能力的影响。
The concentration of emulsifier and the reaction temperature is the main factor to effect the performance of product.
乳化剂的浓度和反应温度是影响产品性能的主要因素。
It was founded from experimentally that the reaction temperature is the most important parameter determining the shift...
实验发现反应(分离)温度是影响酯化反应化学平衡移动的最重要因素。
And discussed the reaction temperature, the ratio of reagent, the solvent concentration, reaction time on the production rate.
并讨论了反应温度、反应物的摩尔比、溶剂的用量、反应时间对产率的影响。
The formation and disappearance of intermediates are largely affected by the reaction temperature and substrate concentrations.
反应温度和底物浓度对中间体的形成和消失有较大的影响。
Moreover, the degree of PET depolymerization was increased when the reaction temperature raised or the reaction time prolonged.
并且一定范围内，PET解聚率随解聚反应温度(或压力)的升高和反应时间的增长而增大。
We concluded that the operational press has less affect and the reaction temperature and the quantity of oleum is the key parameter.
认为反应压力对混合反应影响不大、混合温度和烟酸比例是关键。
The effects of the experimental conditions, such as the additives and their quantities and the reaction temperature, were investigated.
文中考察了添加剂的用量及反应温度对反应的影响。
Therefore, for further optimization of operating this system, the reaction temperature should be investigated and controlled carefully.
研究结果为后续的热解试验参数优化和实际运行控制提供了有用的指导价值。
The effects of the reaction temperature and the concentration of PAA on the nucleation and growth of aragonite crystals were investigated.
结果表明，在文石型碳酸钙粒子的合成中有机基质和反应温度是非常重要的参数。
Discussed the influence to the retention rate by the dosage of coupling agents, the reaction time, the reaction temperature in modification.
讨论了轻质碳酸钙改性过程中偶联剂用量、反应时间、反应温度等因素对留着率的影响。
The reaction temperature and concentration of mineralizer KOH have a significant effect on the formation and morphology of solid solution products.
反应温度和矿化剂KOH的浓度对产物固溶体的形成及其形貌有重要影响。
Effects of the amounts of the catalyst used, the ratio of reactants the reaction temperature and the condition of neutralization were investigated.
研究了反应物料配比、酯化反应温度、催化剂用量、中和条件对酯化反应的影响。
It was founded from experimentally that the reaction temperature is the most important parameter determining the shift of esterification equilibrium.
实验发现反应(分离)温度是影响酯化反应化学平衡移动的最重要因素。
Conclusion: the chlorine dioxide content of the product increased with prolonging the activating reaction time and increasing the reaction temperature.
结论，该产品二氧化氯含量随激活反应时间的延长和反应温度的升高而增加。
The methane conversion increased and formaldehyde selectivity decreased and formaldehyde specific activity increased as the reaction temperature rising.
随着反应温度的升高，甲烷的转化率增加，甲醛的选择性降低，甲醛比活性升高。
The sludge degradation rate and the non-biodegradable material concentration in the liquid phase would increase when the reaction temperature is raised.
提高温度时，污泥降解速率亦提高，但转入液相的难生物降解产物也增加。
Tubular vanadium oxide can be synthesized by adjusting the PH of reaction system, regulating the ratio of reactants and controlling the reaction temperature.
通过合理的调节反应物配比、调节体系的PH值、选择合适的反应温度，可以得到具有管状结构的钒酸盐晶体。
During the reduction process, it is possible to obtain metal with dense layer or ultrafine powder by controlling the reaction temperature and chloride concentration.
在还原过程中，控制反应温度及氯化物浓度可以获得金属致密镀层或超微粉末。
The stability of the catalyst could be improved by increasing the reaction temperature or by lowering the reaction pressure and the concentration of oxygen in the feed.
考察了不同反应条件对催化剂稳定性的影响，发现降低反应温度、提高反应压力和进料中氧气浓度可在一定程度上提高催化剂的稳定性。
The experimental results showed that the volatilization ratio increases with the increasing of the reaction temperature, steam flow rate and decreasing of bed thickness.
当温度升高、床层厚度增加及水蒸气流量增加时，锑的挥发率相应在增加。
应用推荐