The fault-tolerant control of electronic fuel injection (EFI)engine plays an important role in improving its emission and economy performance.
电喷汽车发动机的容错控制对于改善汽车发动机的排放、经济性有重要作用。
First, we build a fault diagnosis and fault-tolerant control of a specific model of the torpedo.
首先是建立了一套故障诊断和容错控制研究专用的水下航行器模型。
The result shows that the algorithm, which has better adaptability, can fulfill the demand of fault tolerant control in fault system with single sensor failure.
结果表明，该控制策略可以满足有单个传感器失效的故障系统容错控制要求，具有更强的适应性。
Firstly, the fault-tolerant process control is introduced according to the safety and economics requirement of chemical, power, iron and steel processes.
首先，从工业生产过程的安全经济运行与控制需要出发，介绍了过程控制中容错的基本思想。
The fault probability, the degree of fault tolerance and problem of reliabilty in the fault tolerant control system are analyzed in the view of statistics.
基于系统的状态划分，以统计理论的观点分析了容错控制系统中的故障概率、容错能力和可靠性问题。
An unified methodology for the fault detection and the fault tolerant control based on iterative learning observer (ILO) is presented.
提出了一种基于迭代学习观测器(ILO)将故障检测和容错控制进行统一设计的方法。
The paper presents the topology and control strategy of a highly fault tolerant induction motor VF speed regulation system.
本文提出一种高容错感应电机变频调速集成系统的拓扑结构和控制策略。
A decoupling controller and an approach to the allocation of thruster forces of an AUV are investigated first, then a fault-tolerant control approach under thruster fault is given.
文中先给出在正常情况下水下机器人的解耦控制器及推力分配，然后给出了在推力器出现故障时的容错控制策略。
The Markov method is used to analyse the reliability of dual hot - redundant reparable fault tolerant control system, and some calculating formula are derived.
用马尔可夫过程，对双机热冗余可修复容错控制系统的可靠性进行了分析，得出了有关的计算公式。
The problem of robust fault-tolerant control for networked control systems (NCS) with uncertain time-delay and uncertain parameter is studied.
研究了一类具有网络诱导时延和参数不确定性网络化控制系统鲁棒容错控制问题。
The intension of concept of reliability and the definition of reliability are discussed according to whether the fault tolerant control system satisfies performance requirement.
以是否满足性能指标要求为评判标准，研究了容错控制系统可靠性概念的内涵和定义。
The purpose of this paper is to apply fault tolerant control theories to the design of electro hydraulic servo system in order to raise its reliability.
本文目的旨在把当今前沿的容错控制理论应用到电液伺服系统设计中去，以提高其可靠性。
The robust fault-tolerant control problem is studied for uncertain linear discrete systems.
研究了线性离散不确定系统的鲁棒容错控制问题。
The application of fault tolerant control and information fusion of multi-sensors is studied in this paper for autonomous flight of pilotless helicopters.
研究了将多传感器容错控制和信息融合技术应用于无人直升机的自主飞行控制。
This control system is decoupled and has good dynamic properties in the normal state, and has fault-tolerant capability against arbitrary actuator or sensor failures.
本文提出的加压网前箱容错控制系统，在正常情况下具有解耦功能和期望动态品质，同时，对任意执行器和传感器卡死故障具有容错性。
The fault tolerant control is of mini-mum variance control in the case of random parameters and noises.
容错控制是随机参数和随机噪声情况下的最小方差控制。
The protocols of the CAN bus have the function of fault tolerant control, but when a great quantity of information transmit by the network, it's easy to make mistakes.
CAN协议本身具有容错控制的功能，但是当网络信息负载较大时，网络容易出错，且CAN总线网络排除永久性故障的能力较差，不能满足对实时性和可靠性要求较高的网络需求；
Distributed fault-tolerant real-time control systems are widely used in the field of safety critical systems.
分布式容错实时控制系统广泛应用于安全关键系统中。
The D-stable fault-tolerant control problem of discrete time-delay uncertain system is studied.
研究了离散时滞不确定系统的D稳定容错控制问题。
Now the STF has achieved satisfactory results in the joint estimation of time-delay and parameter, fault diagnosis, fault -tolerant control in nonlinear systems.
STF已经在非线性系统时滞估计、故障诊断与容错控制方面取得了很好的效果。
Fault diagnosis and tolerant control technology is an important approach to improve the safety and reliability for dynamic systems.
故障诊断与容错控制技术是提高动态系统的安全性、可靠性的重要途径之一。
The need of simultaneous stabilization or pole-assignment is due to de-signing fault-tolerant control systems.
同时稳定或极点配置是出于设计容错控制系统之所需。
The robust fault-tolerant control problem of linear discrete system is discussed in this paper.
讨论了离散线性系统的鲁棒容错控制问题。
The research results in the dissertation can be used in engineering design of fault diagnosis and fault-tolerant control of fin stabilizer systems.
本文的研究工作可为减摇鳍故障诊断与容错控制工程设计应用。
Therefore, it is very important to determine the degree of importance of a component in the design process of a fault-tolerant control system.
因此，在设计容错控制系统时确定部件重要度是非常重要的。
The control strategies and fault-tolerant performance of HEDS machine.
②混合励磁双凸极电机的控制策略及容错性能。
Robust fault-tolerant control problem for uncertain continuous systems based on regional pole assignment is discussed. Then the design method and its effectivity are given.
进而讨论了不确定连续系统的闭环极点配置在圆形区域内的鲁棒容错控制问题，给出了该条件下鲁棒容错控制系统的设计方法及其有效性。
On the active fault-tolerant control for descriptor systems, the problem of observer-based active fault-tolerant control for descriptor linear systems is considered.
关于广义系统的主动容错控制，研究了基于状态观测器的线性广义系统的主动容错控制的问题。
The method effectively resolved the influence on stability when certain element failed and implemented the fault tolerant control for complex system.
该方法有效解决了某环节失效后对系统稳定性的影响，实现了复杂系统的容错控制。
In addition, the characteristics of the common seen fault diagnosis and fault tolerant control methods are compared.
同时，比较了几种常见故障诊断和容错控制方法的特点。
应用推荐